Integrated Circuit Systems, Inc. ICS9112-26 Low Skew Output Buffer General Description Features The ICS9112-26 is a high performance, low skew, low jitter clock driver. It is designed to distribute high speed clocks in PC systems operating at speeds from 0 to 133 MHz. • • • • • The ICS9112-26 comes in an eight pin 150 mil SOIC package. It has four output clocks. • Frequency range 0 - 133 MHz (3.3V) Less than 200 ps Jitter between outputs Skew controlled outputs Skew less than 250 ps between outputs Available in 8 pin 150 mil SOIC & 173 mil TSSOP packages. 3.3V ±10% operation Block Diagram CLK0 CLK1 CLK_IN CLK0 1 VDD 2 GND 3 CLK1 4 ICS9112-26 Pin Configuration 8 CLK_IN 7 CLK3 6 VDD 5 CLK2 8 pin SOIC & TSSOP CLK2 CLK3 Pin Descriptions PIN NUMBER PIN NAME 1 TYPE DESCRIPTION 1 CLK0 OUT Buffered clock output 2,6 VDD PWR Power Supply (3.3V) 3 GND PWR Ground 4 CLK11 OUT Buffered clock output 5 CLK21 OUT Buffered clock output 7 1 CLK3 OUT Buffered clock output 8 CLK_IN IN Input reference frequency. Notes: 1. Weak pull-down on all outputs 9112-26 Rev B- 07/16/01 ICS reserves the right to make changes in the device data identified in this publication without further notice. ICS advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate. ICS9112-26 Absolute Maximum Ratings Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . Logic Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ambient Operating Temperature . . . . . . . . . . . . Storage Temperature . . . . . . . . . . . . . . . . . . . . . . 7.0 V GND –0.5 V to V DD +0.5 V 0°C to +70°C –65°C to +150°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only and functional operation of the device at these or any other conditions above those listed in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Electrical Characteristics at 3.3V TA = 0 - 70C; Supply Voltage VDD = 3.3 V +/-5% (unless otherwise stated) PARAMETER SYMBOL High-level Output Voltage VOH Low-level Output Voltage VOL High-level Input Current IOH Low-level Input Current IOL Input Current Input Capacitance1 1 Output Capacitance II CI CO Supply current IDD CONDITIONS VDD = min to max, IOH = -1 mA VDD = 3V, IOH = -24 mA VDD = 3V, IOH = 12 mA VDD = min to max, IOH = 1 mA VDD = 3V, IOH = 24 mA VDD = 3V, IOH = 12 mA VDD = 3V, VO = 1V VDD = 3.3V, VO = 1.65V VDD = 3V, VO = 2V VDD = 3.3V, VO = 1.65V V = VO or VDD VDD = 3.3V, VI = 0V or 3.3V VDD = 3.3V, VI = 0V or 3.3V REF = 0 MHz Unloaded outputs at 66.67 MHz MIN VDD - 0.2 2 2.4 60 TYP 3.3 2.9 3.1 0.0055 0.28 0.14 -61 -77 103 111 -5 MAX 0.2 0.8 0.55 -50 50 40 µA pF pF µA mA MAX 7 7 100 0.5 UNITS ns ns ps ps 5 3 3.2 22 25 UNITS V V V V V V 1. Guaranteed by design, not 100% tested in production. Switching Characteristics at 3.3V TA = 0 - 70C; Supply Voltage VDD = 3.3 V +/-5% (unless otherwise stated) PARAMETER Low-to-high Propagation Delay1 High-to-low Propagation Delay1 Output Skew Window1 Process Skew1 SYMBOL tPLH tPHL Tsk(O) Tsk(PR) CLKIN High Time1 Thigh CLKIN Low Time1 Tlow Output Rise Slew Rate1 Output Rise Slew Rate1 Tr Tf 1. Guaranteed by design, not 100% tested in production. CONDITIONS VO = VDD/2 VO = VDD/2 VO = VDD/2 VO = VDD/2 66 MHz 133 MHz 66 MHz 133 MHz 0.3 to 0.6 VDD 0.3 to 0.6 VDD Notes: 1. Guaranteed by design and characterization. Not subject to 100% test. 2. CLK_IN input has a threshold voltage of 1.4V 3. All parameters expected with loaded outputs 2 MIN 4 4 6 3 6 3 2 2 TYP 5.6 5.2 50 ns ns 3.6 3.2 5 5 V/ns V/ns ICS9112-26 SYMBOL In Millimeters In Inches COMMON DIMENSIONS COMMON DIMENSIONS MIN MAX MIN MAX A 1.35 1.75 .0532 .0688 A1 0.10 0.25 .0040 .0098 B 0.33 0.51 .013 .020 C 0.19 0.25 SEE VARIATIONS .0075 .0098 SEE VARIATIONS 3.80 4.0 1.27 BASIC .1497 .1574 0.050 BASIC H 5.80 6.20 .2284 .2440 h 0.25 0.50 .010 .020 L 0.40 1.27 SEE VARIATIONS D E e N α 0° .016 .050 SEE VARIATIONS 8° 0° 8° MIN MAX MIN MAX 4.80 5.00 .1890 .1968 VARIATIONS D mm. N 8 D (inch) 150 mil (Narrow Body) SOIC Ordering Information ICS9112yM-26-T Example: ICS XXXX y M - PPP - T Designation for tape and reel packaging Pattern Number (2 or 3 digit number for parts with ROM code patterns) Package Type M=SOIC Revision Designator (will not correlate with datasheet revision) Device Type (consists of 3 or 4 digit numbers) Prefix ICS, AV = Standard Device 3 ICS reserves the right to make changes in the device data identified in this publication without further notice. ICS advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate. ICS9112-26 SYMBOL In Millimeters In Inches COMMON DIMENSIONS COMMON DIMENSIONS MIN MAX MIN MAX A - 1.20 - .047 A1 0.05 0.15 .002 .006 A2 0.80 1.05 .032 .041 b 0.19 0.30 .007 .012 c 0.09 0.20 SEE VARIATIONS D .0035 .008 SEE VARIATIONS 6.40 BASIC E E1 4.30 e 4.50 0.252 BASIC .169 0.65 BASIC L 0.45 0.75 SEE VARIATIONS N .177 0.0256 BASIC .018 .030 SEE VARIATIONS α 0° 8° 0° 8° aaa - 0.10 - .004 MIN MAX MIN 2.90 3.10 .114 .122 MO-153 JEDEC Doc.# 10-0038 7/6/00 Rev B VARIATIONS D mm. N 4.40 mm. Body, 0.65 mm. pitch TSSOP (0.0256 mil) (173 mil) 8 D (inch) MAX Ordering Information ICS9112yG-26-T Example: ICS XXXX y G - PPP - T Designation for tape and reel packaging Pattern Number (2 or 3 digit number for parts with ROM code patterns) Package Type G=TSSOP Revision Designator (will not correlate with datasheet revision) Device Type Prefix ICS, AV = Standard Device 4 ICS reserves the right to make changes in the device data identified in this publication without further notice. ICS advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate.