VUO 122 IdAV = 117 A VRRM = 800-1600 V Three Phase Rectifier Bridge in ECO-PAC 2 Preliminary data VRSM VRRM V V 900 1300 1500 1700 800 1200 1400 1600 PS16 Types ~A 1 ~L 9 ~ K10 VUO 122-08NO7 VUO 122-12NO7 VUO 122-14NO7 VUO 122-16NO7 EG 1 Pin arangement see outlines Test Conditions IdAV ① TC = 100°C, module 117 A IFSM TVJ = 45°C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 900 990 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 770 850 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4050 4050 A2 s A2 s 2950 2950 2 As A2 s • • • • -40...+150 150 -40...+125 °C °C °C Advantages 2500 3000 V~ V~ I2t TVJ = TVJM VR = 0 Maximum Ratings Features Symbol t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL ≤ 1 mA t = 1 min t=1s Md Mounting torque (M4) Weight typ. Symbol Test Conditions IR VR = VRRM; VR = VRRM; TVJ = 25°C TVJ = TVJM ≤ ≤ 0.5 5 mA mA TVJ = 25°C ≤ 1.75 V 0.8 4 V mΩ 0.85 0.142 1.15 0.192 K/W K/W K/W K/W 11.2 9.7 50 mm mm m/s2 VF IF For power-loss calculations only RthJC per diode; DC current per module per diode, DC current (typ.) per module (typ.) RthJH dS dA a Nm lb.in. g Applications Supplies for DC power equipment Input rectifiers for PWM inverter Battery DC power supplies Field supply for DC motors • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • Small and light weight Dimensions in mm (1 mm = 0.0394") Characteristic Values VT0 rT = 200 A; 1.5 - 2 14 - 18 18 • Package with DCB ceramic base plate • Isolation voltage 3000 V~ • Planar passivated chips • Low forward voltage drop • Leads suitable for PC board soldering Creeping distance on surface Creepage distance in air Max. allowable acceleration IXYS reserves the right to change limits, test conditions and dimensions. © 2002 IXYS All rights reserved 241 Data according to IEC 60747 refer to a single diode unless otherwise stated ① for resistive load at bridge output. 1-1 B3