ECO-PACTM 1 Three Phase Rectifier Bridge PSD 68 IdAV VRRM = 68 A = 600-1600V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Type PSD PSD PSD PSD PSD + ~H ~A ~N 68/06 68/08 68/12 68/14 68/16 Features Symbol Test Conditions I*dAV IFSM TC = 100 °C, ∫ i2 dt TVJ TVJM Tstg VISOL K - Maximum Ratings (per module) 68 A TVJ = 45 °C t = 10 ms (50 Hz), sine 300 A VR = 0 t = 8.3 ms (60 Hz), sine 320 A TVJ = TVJM t = 10 ms (50 Hz), sine 260 A VR = 0 t = 8.3 ms (60 Hz), sine 280 A TVJ = 45 °C t = 10 ms (50 Hz), sine 450 A²s VR = 0 t = 8.3 ms (60 Hz), sine 425 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 340 A²s VR = 0 t = 8.3 ms (60 Hz), sine 325 A²s -40... + 150 150 °C °C -40... + 125 °C 2500 V∼ 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA t=1s Md Mounting torque Weight typ. (M4) 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 3 mA VR = VRRM, TVJ = 25°C ≤ 0.5 mA IF = 55 A, ≤ 1.46 V 0.8 V 13 mΩ per diode; DC per module per diode; DC 1.1 0.18 1.6 K/W K/W K/W per module 0.27 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 9.7 50 VF VTO rT RthJC RthJK ds dA a Characteristic Value TVJ = 25 °C For power-loss calculations only • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Input rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) mm mm m/s² Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output Used solder not Pb free! POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions