VBO 55 IdAV = 55 A VRRM = 800-1600 V Single Phase Rectifier Bridge Preliminary data VRSM 900 1300 1500 1700 1900 Symbol V 800 1200 1400 1600 1800 VBO 55-08NO7 VBO 55-12NO7 VBO 55-14NO7 VBO 55-16NO7 VBO 55-18NO7 Test Conditions Maximum Ratings IdAV ①TC = 100°C, module IFSM I2t t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 750 820 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 600 700 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2800 2820 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2200 2250 A2s A2s -40...+150 150 -40...+125 °C °C °C 2500 3000 V~ V~ VISOL 50/60 Hz, RMS IISOL £ 1 mA Md Weight Mounting torque (M5) (10-32 UNF) typ. Symbol Test Conditions IR VR = VRRM; VR = VRRM; TVJ = 25°C TVJ = TVJM £ £ t = 1 min t=1s TVJ = 25°C £ VF IF For power-loss calculations only TVJ = TVJM RthJC per diode; DC current per module per diode, DC current per module = 150 A; 5 ± 15 % 44 ± 15 % 110 Nm lb.in. g Characteristic Values VT0 rT dS dA a A TVJ = 45°C; VR = 0 TVJ TVJM Tstg RthJK 55 Creeping distance on surface Creepage distance in air Max. allowable acceleration 0.5 10 • • • • • Package with copper base plate Isolation voltage 3000 V~ Planar passivated chips Low forward voltage drop 1/4" fast-on power terminals Applications • • • • Supplies for DC power equipment Input rectifiers for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • Small and light weight Dimensions in mm (1 mm = 0.0394") mA mA 1.6 V 0.8 6 V mW 1.3 0.325 1.6 0.4 K/W K/W K/W K/W 16.1 7.5 50 mm mm m/s2 Data according to IEC 60747 refer to a single diode unless otherwise stated ① for resistive load at bridge output. IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved Features 024 V VRRM Types 1-1