® Kingbright 127mm (5.0INCH) SINGLE DIGIT NUMERIC DISPLAYS SA50-11 SC50-11 Features Description lLARGE The Super Bright Green source color devices are made with SIZE. l5.0 INCH DIGIT HEIGHT. lEXCELLENT CHARACTER APPEARANCE. lHIGH LIGHT OUTPUT. lEASY MOUNTING ON P.C. BOARDS OR SOCKETS. lI.C. COMPATIBLE. lCATEGORIZED FOR LUMINOUS INTENSITY, YELLOW AND GREEN CATEGORIZED FOR COLOR. lMECHANICALLY RUGGED. lSTANDARD : GRAY FACE, WHITE SEGMENT. Package Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Dimensions Internal Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subjected to change whitout notice. 7-S50-1 Circuit Diagram Selection Guide Part No. SA50-11EWA SC50-11EWA SA50-11YWA SC50-11YWA SA50-11SRWA SC50-11SRWA SA50-11SGWA SC50-11SGWA Iv (ucd) @ 10 mA Dice Min. Max. HIGH EFFICIENCY RED (GaAsP/GaP) 14000 21000 YELLOW (GaAsP/GaP) 9000 14000 SUPER BRIGHT RED (GaAlAs) 31000 50000 SUPER BRIGHT GREEN (GaP) 21000 31000 Description Common Anode, Rt. Hand Decimal Common Cathode, Rt. Hand Decimal Common Anode, Rt. Hand Decimal Common Cathode, Rt. Hand Decimal Common Anode, Rt. Hand Decimal Common Cathode, Rt. Hand Decimal Common Anode, Rt. Hand Decimal Common Cathode, Rt. Hand Decimal Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green Yellow Super Bright Red ∆λ1/2 Spectral Line Halfwidth High Efficiency Red Super Bright Green Yellow Bright Red C Capacitance High Efficiency Red Super Bright Green Yellow Bright Red vF Forward Voltage High Efficiency Red Super Bright Green Yellow Bright Red IR Reverse Current All Super Super Super Units Test Conditions 625 565 590 660 nm IF=20mA 45 30 35 20 nm IF=20mA 12 45 10 95 pF VF=0V;f=1MHz V IF=20mA uA VR = 5V 2.0 2.2 2.1 1.85 10 7-S50-2 Max. 2.5 2.5 2.5 2.5 Absolute Maximum Ratings at TA=25°C High Efficiency Red Super Bright Green Yellow Super Bright Red Units Power dissipation 105 105 105 100 mW DC Forward Current 30 25 30 30 mA Peak Forward Current [1] 150 150 150 150 mA 5 5 5 5 V Parameter Reverse Voltage Operating/Storage Temperature -40 °C To +85 °C Lead Soldering Temperature [2] 260 °C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base High Efficiecny Red 7-S50-3 Super Bright Green Yellow 7-S50-4 Super Bright Red 7-S50-5