Photo diodes KODENSHI HP-3ML・HP-3MLR2 DIMENSIONS (Unit : mm) The HP-3ML is a high-output, high-speed photodiode mounted in a TO-18 type header with clear epoxy encapsulation, The HP-3MLR2 photodiode, with daylight filter, is available in the same package. FEATURES •High-output power •High-speed response •Wide angular response •Relatively low-cost against metal can package APPLICATIONS •Optical detectors •Optical switches MAXIMUM RATINGS Item Reverse voltage Operating temp. Storage temp. Soldering temp. *1 (Ta=25℃) Symbol Rating Unit VR Topr. Tstg. Tsol. 5 -20~+80 -30~+100 260 V ℃ ℃ ℃ *1. For MAX.5 seconds at the position of 2 mm from the package ELECTRO-OPTICAL CHARACTERISTICS Item Open circuit voltage Short circuit current Dark current Curve factor Capacitance Temperature coefficient of VOC Temperature coefficient of ISC Spectral sensitivity Peak wavelength Half angle Symbol VOC ISC Id C.F. Ct αt βt λ λp Δθ (Ta=25℃) Conditions EV=1,000lx *2 HP-3ML Max. Typ. Min. HP-3MLR2 Max. Typ. Min. 0.38 75 0.30 60 54 VR=5V 10 1 0.55 0.55 V=0V, f=1MHz *2. Color temp.=2856K standard Tungsten lamp - 1- 180 -2.2 0.18 450~1,050 900 ±60 180 -2.2 0.18 700~1,050 940 ±60 Unit. V μA μA pF mV/℃ %/℃ nm nm deg. Photo diodes HP-3ML・HP-3MLR2 Light current Vs. Forward voltage Relative sensitivity Vs. Wavelength Short circuit current Vs. Illuminance Dark current Vs. Ambient temperature Dark current Vs. Reverse voltage Radiant Pattern Capacitance between terminals Vs. Reverse voltage - 2-