53209 53210 SPDT SOLID-STATE RELAYS 53211 High Power AC/DC Switching Features: Applications: • • • • • • • • • • • • • Replacements for M30-1, M30-3, M30-4 SPDT, Break-Before-Make Up to 1500 V RMS optical isolation Output voltage up to ±320 VDC (53211) Power FET output low on-state resistance Full military temperature operation: -55ºC to +125ºC Military environmental screening available Mii MICROCIRCUITS PRODUCTS DIVISION High power switching Line drivers Servo control Harsh environment Load control General purpose switching DESCRIPTION The 53209, 53210, and 53211 are military SPDT high power, solid-state relays. These light-weight devices are resistant to damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1500 volts AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop for high current capability. The control logic is CMOS compatible, and will accommodate bias supplies ranging between 4 and 16 VDC. A TTL input driver with pull-up resistor may also be used. These solid-state relays are ideal for use in military systems, or wherever high reliability, low power actuation, and light weight are design considerations. Applications include general purpose signal switching and electronic load control. ABSOLUTE MAXIMUM RATINGS 1 Isolation Voltage ................................................................................................................................................ 1500 VAC RMS Continuous Operating Output Voltage: 53209............................................................................................................. ±80 Peak 53210 .........................................................................................................±160 Peak 53211 .........................................................................................................±320 Peak 2 Load Current : 53209 ...............................................................................................................................................4.1 A RMS 53210 ..............................................................................................................................................2.6 A RMS 53211...............................................................................................................................................1.3 A RMS Bias Supply Voltage, VDD ................................................................................................................................................16 VDC Control Logic Input Voltage ..............................................................................................................................................16 VDC Operating Temperature ........................................................................................................................... -55ºC to +125ºC Case Storage Temperature ........................................................................................................................................-55ºC to +125ºC Notes: 1 60 Hz sine wave 2 at 25ºC with 2.0º C/W heat sink max Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 8/12/02 Pg. 1 of 4 53209, 53210, & 53211 SPDT SOLID-STATE RELAYS ELECTRICAL CHARACTERISTICS TA = +25° C PARAMETER Isolation Voltage, I/O Isolation Resistance CONDITIONS MIN 60 Hz Sine Wave 1500 at 500 V TYP MAX UNITS VAC RMS 10 9 Ohms Continuous Operating Output Voltage 53209 80 VAC Peak 53210 160 VAC Peak 53211 320 VAC Peak 53209 80 VAC Peak 53210 180 VAC Peak 53211 380 VAC Peak 4.1 Amps RMS Transient Output Voltage Load Current 53209 2.0 ºC/W Heat Sink 53210 2.6 53211 1.3 On Resistance TA = 25ºC 0.6 Ohms 53210 1.5 Ohms 53211 6.0 Ohms 53209 Capacitance, I/O 25 V, 1 MHz 5 pF Leakage Current Load Voltage = Maximum 20 µA 16 VDC Bias Supply Voltage, VDD 4 Bias Current 16 mA Control Logic Voltage 13 16 VDC Control Logic Current 2 µA Control Logic Level – High 0.75 VDD VDD VDC Control Logic Level – Low 0 0.15 VDD VDC Load Voltage = 28 VDC 3.0 ms RL = 50Ω 4.0 ms tf (fall Time) 50 µs toff (Turn-Off Time) 250 µs 1.5 ms tr (Rise Time) ton (Turn-On-Time) 0.5 td (Dwell Time) Thermal Resistance, θJA 20 ºC/W θJC 4.2 ºC/W Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 8/12/02 Pg. 2 of 4 53209, 53210 and 53211 SPDT SOLID-STATE RELAYS VDD 22 12 CONTROL LOGIC 1 16 3 GND 9 COMMON FET OUTPUT INPUT BUFFER Truth Table INPUT (Pin 1) Pin 12 Pin 16 High Closed Open Low Open Closed Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 8/12/02 Pg. 3 of 4 53209, 53210 and 53211 SPDT SOLID-STATE RELAYS Package Dimensions 2.100 1.750 1.450 .735 .795 Ø.157 2 PLACES (1.390) (.060) .240 MAX. .45 MIN. Ø.040, 6 PLACES 3 1 9 .400 .200 22 16 12 .200 (BOTTOM VIEW) .600 .800 TOL: ±.010 1.000 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: [email protected] 8/12/02 Pg. 4 of 4