MII 66116-202

Mii
Single Channel Optocoupler
66116
Electrically Similar to 4N47-4N49
Coaxial or Bulkhead Mount packages
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
•
•
•
•
•
•
•
•
•
•
High reliability
Base lead provided for conventional transistor
biasing
Very high gain, high voltage transistor
Hermetically sealed for reliability and stability
Stability over wide temperature range
High voltage electrical isolation
Line Receivers
Switchmode Power Supplies
Signal ground isolation
Process Control input/output isolation
DESCRIPTION
Very high gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor packaged in a
hermetically sealed metal case. These devices can be tested to customer specifications, as well as to MIL-PRF-38534 H&K
quality levels.
*ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage........................................................................................................................................................ ±1kV
Collector-Base Voltage ........................................................................................................................................................... 45V
Collector-Emitter Voltage (See Note 1) .................................................................................................................................. 40V
Emitter-Base Voltage................................................................................................................................................................ 7V
Input Diode Reverse Voltage.................................................................................................................................................... 2V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 2) ....................................40mA
Continuous Collector Current ..............................................................................................................................................50mA
Peak Diode Current (See Note 3)............................................................................................................................................. 1A
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 4) ................................300mW
Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C
Storage Temperature..........................................................................................................................................-65°C to +125°C
Lead Temperature (1/16” (1.6mm) from case for 10 seconds).......................................................................................... 240°C
* JEDEC registered data
Package Dimensions
Schematic Diagram
Base
Collector
Emitter
Case Lead
A
C
E
K
Case Lead
B
ANODE
CATHODE
Notes:
1. This value applies with the emitter-base diode open-circuited and the input-diode current equal to zero.
2. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C.
3. This value applies for tw≤1us. PRR<300 pps.
4. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
3 - 12
66116
Single Channel Optocoupler
ELECTRICAL CHARACTERISTICS
PARAMETER
TA = 25°C Unless otherwise specified
SYMBOL
Input Diode Static Reverse Current
MIN
TYP
MAX
UNITS
TEST CONDITIONS
100
µA
VR = 2V
1.4
1.7
1.5
1.3
V
IE = 10mA
TYP
MAX
IR
-55°C
+25°C
+100°C
Input Diode Static Forward Voltage
1
0.8
0.7
VF
OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified
PARAMETER
SYMBOL MIN
UNITS
TEST CONDITIONS
V(BR)CBO
45
V
Collector-Emitter Breakdown Voltage
V(BR)CEO
40
V
IC = 100µA, IB = 0, IF = 0
IC = 1mA, IB = 0, IF = 0
Emitter-Collector Breakdown Voltage
V(BR)ECO
7
V
IC = 0, IE = 100µA, IF = 0
UNITS
TEST CONDITIONS
Collector-Base Breakdown Voltage
COUPLED CHARACTERISTICS
PARAMETER
On State Collector Current
On State Collector Current
-55°C
-XX1
-XX2
-XX3
SYMBOL
MIN
IC(ON)
0.5
1
2
TYP
MAX
0.7
1.4
2.8
mA
IC(ON)
0.5
1
2
mA
IC(ON)
5
10
VCE = 5V, IB = 0, IF = 1mA
VCE = 5V, IB = 0, IF = 2mA
VCE = 5V, IB = 0, IF = 2mA
+25°C
IC(OFF)
100
nA
VCE = 20V, IB = 0, IF = 0mA
Off State Collector Current
+100°C
IC(OFF)
100
µA
VCE = 20V, IB = 0, IF = 0mA
VCE(SAT)
VCE(SAT)
VCE(SAT)
0.3
0.3
0.3
V
V
V
IC = 0.5mA, IB = 0, IF = 2mA
IC = 1mA, IB = 0, IF = 2mA
IC = 2mA, IB = 0, IF = 2mA
-XX1
-XX2
-XX3
10
NOTE
mA
Off State Collector Current
Collector-Emitter Saturation Voltage
NOTE
TA = 25°C Unless otherwise specified
-XX1
-XX2
-XX3
On State Collector Current
+100°C
NOTE
11
2
Input to Output Resistance
RI-O
VIN-OUT = 1kV
1
Input to Output Capacitance
CI-O
5
pF
f = 1MHz, VIN-OUT = 1kV
1
Rise Time/ Fall Time
Phototransistor Operation
-XX1
-XX2
-XX3
tr / tf
tr / tf
tr / tf
20
25
25
µs
µs
µs
VCC = 10V, IF = 5mA, RL = 100Ω
Rise Time/ Fall Time
Photodiode Operation
-XX1
-XX2
-XX3
t r / tf
t r / tf
t r / tf
0.85
0.85
0.85
µs
µs
µs
VCC = 10V, IF = 5mA, RL = 100Ω
NOTES:
1.
These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
2.
This parameter measured using pulse techniques tw =100µs, duty cycle < 1%.
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
MIN
MAX
Input Current, Low Level
IFL
0
100
µA
Input Current, High Level
IFH
2
10
mA
VCE
5
10
V
Supply Voltage
UNITS
SELECTION GUIDE
PART NUMBER
66116-001
66116-002
66116-003
66116-001B
66116-002B
66116-003B
66116-101
66116-102
66116-103
66116-101B
66116-102B
66116-103B
66116-201
66116-202
66116-203
66116-201B
66116-202B
66116-203B
PART DESCRIPTION
Single Channel, Commercial (0 to 70ºC) Coaxial Packaging
Single Channel, Commercial (0 to 70ºC) Coaxial Packaging
Single Channel, Commercial (0 to 70ºC) Coaxial Packaging
Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging
Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging
Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging
Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging
Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging
Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging
Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging
Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging
Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging
Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging
Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging
Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging
Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging
Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging
Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: optos[email protected]
3 - 13