66179 GULL WING HERMETICALLY SEALED, SINGLE CHANNEL OPTOCOUPLER (Electrical Equivalent To 66099) MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 01/23/2007 Features: Applications: • • • • • • • • • • Current transfer ratio: 150% typical 1000 Vdc isolation test voltage Base lead provided for conventional transistor biasing Low power consumption High radiation immunity Military and Space High reliability systems Voltage Level Shifting Isolated Receiver Input Communication systems DESCRIPTION Radiation tests performed on the 66099 optocoupler have shown that the electrical performance of the device after irradiation is an order of magnitude better than the 4N49 optocouplers. The 66179 has the same components and layout in a 10 pin, hermetically sealed gull wing package. Figures 1 and 2 from the 66099 data sheet illustrate the radiation performance of the device. ABSOLUTE MAXIMUM RATINGS (ta =25°C unless otherwise noted) Input to Output Isolation Voltage (Note 1) ......................................................................................................................... 1 kVdc Peak Forward Input Current ..............................................................................................................................................40 mA Reverse Input Voltage ............................................................................................................................................................2 V Input Power Dissipation (Note 2)...................................................................................................................................... 80 mW Continuous Collector Current .............................................................................................................................................50 mA Collector-Emitter Voltage .......................................................................................................................................................40 V Emitter-Base Voltage ...............................................................................................................................................................4 V Collector-Base Voltage ..........................................................................................................................................................40 V Power Dissipation (Note 3) ............................................................................................................................................ 300 mW Storage Temperature........................................................................................................................................................ -65°C to +125°C Operating Free-Air Temperature Range............................................................................................................ -55°C to +100°C Lead Solder Temperature (5 seconds, 1/16” from case) ................................................................................................... 240°C Notes: 1. Measured with input diode leads shorted together and output leads shorted together. 2. Derate linearly 1.06 mW/°C above 25°C. 3. Derate linearly 4.0 mW/°C above 25°C. Package Dimensions Schematic Diagram 0.425±0.010 0.320±0.010 PIN 1 0.270 MAX. ∆ 0.050 TYP. 0.015±0.005 A 2 31757 66179-XXX 9 C 0.200 TYP. 0.270 MAX. XXXX 0.025±0.010 7 E 0.005 NOM. 0.113 MAX. ALL DIMENSIONS ARE IN INCHES K 4 0.005 MAX MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 8 B 66179 GULL WING HERMETICALLY SEALED, SINGLE CHANNEL, OPTOCOUPLER (Electrical Equivalent To 66099) 01/23/2007 ELECTRICAL CHARACTERISTICS INPUT DIODE CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN Input Diode Static Reverse Current IR Input Diode Static Forward Voltage VF 0.8 TYP MAX UNITS TEST CONDITIONS 1 µA VR = 3 V 2 V IF = 10 mA UNITS TEST CONDITIONS OUTPUT TRANSISTOR CHARACTERISTICS TA = 25°C unless otherwise noted SYMBOL MIN Collector-Base Breakdown Voltage PARAMETER V(BR)CBO 40 V IC = 100 µA, IF = 0 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1 mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 4 Collector-Emitter Cutoff Current TYP MAX V IC = 0 mA, IE = 100 µA, IF = 0 100 nA VCE = 20 V MAX UNITS TEST CONDITIONS % VCE = 1 V, IF = 10 mA IF = 20 mA, IC = 10 mA ICEO COUPLED CHARACTERISTICS TA = 25°C unless otherwise noted PARAMETER Current Transfer Ratio Collector-Emitter Saturation Voltage Input-Output Isolation Current Rise Time SYMBOL MIN CTR 100 TYP VCE(SAT) 0.3 V IISO 100 nA tr Fall Time 20 tf 20 VI-O = 1000 V VCC = 10 V, IF = 10 mA, µs RL = 100 Ω VCC = 10 V, IF = 10 mA, µs RL = 100 Ω RECOMMENDED OPERATING CONDITIONS: PARAMETERS SYMBOL MIN MAX Input Current, Low Level IFL 0 100 µA Input Current, High Level IFH 10 20 mA Supply Voltage VCC 5.0 20 V TA -55 +100 °C Operating Temperature UNITS SELECTION GUIDE PART NUMBER PART DESCRIPTION 66179-000 Mil-temp (-55° to +100°C) with 100% device screening 66179-002 Military operating range (-55° to +100°C) 66179-003 Commercial (0° to 70°C) 66179-004 Extended temperature range (-40° to +85°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM