SN54ALS136, SN54AS136, SN74ALS136, SN74AS136 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES WITH OPEN-COLLECTOR OUTPUTS SDAS162 – MARCH 1984–REVISED OCTOBER 1988 • • Package Options include Plastic “Small Outline” Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs SN54ALS136, SN54AS136 . . . J PACKAGE SN74ALS136, SN74AS136 . . . D OR N PACKAGE (TOP VIEW) 1A 1B 1Y 2A 2B 2Y GND Dependable Texas Instruments Quality and Reliability description The SN54ALS136 and SN54AS136 are characterized for operation over the full military temperature range of –55°C to 125°C. The SN74ALS136 and SN74AS136 are characterized for operation from 0°C to 70°C. logic symbol† 1A 2A 2B 3A 3B 4A 3 12 4 11 5 10 6 9 7 8 VCC 4B 4A 4Y 3B 3A 3Y SN54ALS136, SN54AS136 . . . FK PACKAGE (TOP VIEW) 1Y NC 2A NC 2B 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4A NC 4Y NC 3B NC – No internal connection 1 2 1B 13 1B 1A NC VCC 4B A common application is a true/complement element. If one of the inputs is low, the other input will be reproduced in true form at the output. If one of the inputs is high, the signal on the other input will be reproduced inverted at the output. 14 2 2Y GND NC 3Y 3A These devices contain four independent Exclusive-OR gates with open-collector outputs. They perform the Boolean functions Y = A ⊕ B = AB + AB in positive logic. 1 =1 3 1Y FUNCTION TABLE (each gate) 2Y INPUTS A B 4 5 6 9 10 8 3Y 12 13 11 4Y OUTPUT Y L L H L H L L H H H H L 4B † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for D, J, and N packages. Copyright 1991, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54ALS136, SN54AS136, SN74ALS136, SN74AS136 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES WITH OPEN-COLLECTOR OUTPUTS SDAS162 – MARCH 1984–REVISED OCTOBER 1988 exclusive-OR logic An Exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols. EXCLUSIVE-OR =1 These are five equivalent Exclusive-OR symbols valid for an ’ALS136 gate in positive logic; negation may be shown at any two ports. LOGIC IDENTITY ELEMENT = The output is active (low) if all inputs stand at the same logic level (i.e., A=B). 2 EVEN-PARITY ODD-PARITY ELEMENT 2k 2k + 1 The output is active (low) if an even number of inputs (i.e., 0 or 2) are active. The output is active (high if an odd number of inputs (i.e., only 1 of the 2) are active. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ALS136, SN74ALS136 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES WITH OPEN-COLLECTOR OUTPUTS SDAS162 – MARCH 1984–REVISED OCTOBER 1988 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Operating free-air temperature range: SN54ALS136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C SN74ALS136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C recommended operating conditions SN54ALS136 SN74ALS136 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply Voltage VIL VOH Low-level input voltage 0.7 0.8 High-level output current 5.5 5.5 IOL TA Low-level output current 4 8 mA 70 °C High-level input Voltage 2 Operating free-air temperature 2 –55 125 V V 0 V V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK IOH VCC = 4.5 V, VCC = 4.5 V, II = –18 mA VOH = 5.5 V VOL VCC = 4.5 V, VCC = 4.5 V, IOL = 4 mA IOL = 8 mA VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V VCC = 5.5 V, VCC = 5.5 V VI = 0.4 V All inputs at 4.5 V II IIH IIL SN54ALS136 TYP† MAX TEST CONDITIONS ICC † All typical values are at VCC = 5, TA = 25°C. SN74ALS136 TYP† MAX MIN MIN –1.5 –1.5 V 0.1 mA 0.1 0.25 3.9 0.4 UNIT 0.25 0.4 0.35 0.5 V 0.1 0.1 20 20 µA –0.1 –0.1 mA 5.9 mA 5.9 3.9 mA switching characteristics (see Note 1) VCC = 4.5 V to 5.5 V, CL = 50 pF, PARAMETER FROM TO (INPUT) (OUTPUT) tPLH tPHL A or B (other input low) tPLH tPHL (other input low) A or B Y Y RL = 2 kΩ, TA = MIN to MAX SN54ALS136 SN74ALS136 MIN MAX MIN MAX 20 55 20 50 3 18 3 15 20 55 20 50 3 18 3 15 UNIT ns ns NOTE 1: Load circuit and voltage waveforms are shown in Section 1 of the ALS/AS Logic Data Book, 1986. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54AS136, SN74AS136 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES WITH OPEN-COLLECTOR OUTPUTS SDAS162 – MARCH 1984–REVISED OCTOBER 1988 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Operating free-air temperature range: SN54AS136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C SN74AS136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C recommended operating conditions SN54AS136 SN74ALS136 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply Voltage VIL VOH Low-level input voltage 0.8 0.8 High-level output current 5.5 5.5 V IOL TA Low-level output current 20 20 mA 70 °C High-level input Voltage 2 Operating free-air temperature 2 –55 125 V V 0 V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER SN54AS136 TYP† MAX TEST CONDITIONS VIK IOH VCC = 4.5 V, VCC = 4.5 V, II = –18 mA VOH = 5.5 V VOL II VCC = 4.5 V, VCC = 5.5 V, IOL = 4 mA VI = 7 V IIH IIL VCC = 5.5 V, VCC = 5.5 V, VI = 2.7 V VI = 0.4 V ICC VCC = 5.5 V VIA = 4.5 V, ICCL VCC = 5.5 V VIA = 4.5 V † All typical values are at VCC = 5, TA = 25°C. SN74AS136 TYP† MAX MIN MIN –1.5 –1.5 V 0.1 mA 2 0.35 0.5 0.25 0.1 VIB = 0 UNIT 0.4 V 0.1 mA 20 20 µA –0.5 –0.5 mA 14 20 14 20 mA 22 31 22 31 mA switching characteristics (see Note 1) VCC = 4.5 V to 5.5 V, CL = 50 pF, PARAMETER FROM TO (INPUT) (OUTPUT) tPLH tPHL A or B (other input low) tPLH tPHL (other input low) A or B Y Y RL = 2 kΩ, TA = MIN to MAX SN54AS136 SN74ALS136 MIN MAX MIN MAX 6.3 14.8 6.3 12.5 3.3 7.9 3.3 7.1 6.3 12.4 6.3 11.4 3.3 14.1 3.3 10.7 NOTE 1: Load circuit and voltage waveforms are shown in Section 1 of the ALS/AS Logic Data Book, 1986. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT ns ns IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated