3 V, 1500 MHz Si MMIC WIDEBAND AMPLIFIER FEATURES UPC2746T NOISE FIGURE AND GAIN vs. FREQUENCY VCC = 3.0 V, ICC = 7.5 mA • WIDE FREQUENCY RESPONSE: 1500 MHz • LOW VOLTAGE OPERATION: 3 V NOMINAL (1.8 MIN) 5.5 20 • LOW POWER CONSUMPTION: 22.5 mW TYP DESCRIPTION The UPC2746T is a Silicon Monolithic integrated circuit which is manufactured using the NESAT III process. The NESAT III process produces transistors with fT approaching 20 GHz. This device is suitable as a buffer amplifier for cellular and cordless telephone applications. Operating on a 3 volt supply (1.8 volt minimum) this IC is ideally suited for hand-held, portable designs. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. Gain, GS (dB) • TAPE AND REEL PACKAGING OPTION AVAILABLE 18 5.0 16 4.5 NF Noise Figure, NF (dB) GS • SUPER SMALL PACKAGE 4.0 14 0 1000 2000 Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, ZL = ZS = 50Ω) PART NUMBER PACKAGE OUTLINE SYMBOLS UNITS MIN TYP MAX ICC Circuit Current (no signal) VCC = 3.0 V VCC = 1.8 V mA mA 5.0 7.5 4.5 10.0 GS Small Signal Gain, f = 500 MHz, VCC = 3.0 V f = 1000 MHz, VCC = 3.0 V f = 500 MHz, VCC = 1.8 V dB dB dB 16 19 18.5 14 21 fU1 Upper Limit Operating Frequency, VCC = 3.0 V VCC = 1.8 V GHz GHz 1.1 1.5 1.1 Saturated Output Power, f = 500 MHz, VCC = 3.0 V f = 1000 MHz, VCC = 3.0 V f = 500 MHz, VCC = 1.8 V dBm dBm dBm -3 0 -1 -8 Noise Figure, f = 500 MHz, VCC = 3.0 V f = 1000 MHz, VCC = 3.0 V f = 500 MHz, VCC = 1.8 V dB dB dB Input Return Loss, f = 500 MHz, VCC = 3.0 V f = 1000 MHz, VCC = 3.0 V f = 500 MHz, VCC = 1.8 V dB dB dB 10 13 10 10 Output Return Loss, f = 500 MHz, VCC = 3.0 V f = 1000 MHz, VCC = 3.0 V f = 500 MHz, VCC = 1.8 V dB dB dB 5.5 8.5 8.5 9.5 ISOL Isolation, f = 500 MHz, VCC = 3.0 V f = 1000 MHz, VCC = 3.0 V f = 500 MHz, VCC = 1.8 V dB dB dB 40 45 38 37 OIP3 SSB Output Third Order Intercept, f1 = 500 MHz, f2 = 510 MHz, VCC = 3.0 V PSAT NF RLIN RLOUT PARAMETERS AND CONDITIONS UPC2746T TO6 f1 = 1000 MHz, f2 = 1010 MHz, VCC = 3.0 V f1 = 500 MHz, f2 = 502 MHz, VCC = 1.8 V RTH (J-A) Thermal Resistance (Junction to Ambient) Free Air Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB dBm dBm dBm °C/W °C/W 4.0 4.2 5.0 5.5 +5 +6 -2 620 230 Note: 1. The gain at fU is 3 dB down from the gain at 100 MHz. California Eastern Laboratories UPC2746T ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCC PARAMETERS RECOMMENDED OPERATING CONDITIONS UNITS RATINGS SYMBOLS PARAMETERS V 4.0 VCC Supply Voltage V 1.8 3 3.3 TOP Operating Temperature °C -40 25 85 Supply Voltage ICC Total Supply Current mA 16 PIN Input Power dBm 0 PT Total Power Dissipation2 mW 280 TOP Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +150 UNITS MIN TYP MAX TEST CIRCUIT VCC 1000 pF Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85°C). 6 50 Ω IN 50 Ω 4 1 OUT 1000 pF 1000 pF 2, 3, 5 TYPICAL PERFORMANCE CURVES (TA = 25°C) CIRCUIT CURRENT vs. TEMPERATURE 10 10 8 8 Circuit Current, ICC (mA) Circuit Current, ICC (mA) CIRCUIT CURRENT vs. VOLTAGE 6 4 2 VCC = 3.0 V 6 1.8 V 4 2 0 0 0 1 2 3 -60 4 -40 -20 0 20 40 60 80 100 Operating Temperature TOP (°C) Supply Voltage VCC (V) GAIN AND NOISE FIGURE vs. FREQUENCY GAIN vs. FREQUENCY AND TEMPERATURE 20 22 VCC = 3.3 V Insertion Power Gain, GP (dB) +25˚C Gain, GS(dB) 18 +85˚C 16 14 VCC = 3.0 V ICC = 7.5 mA 20 3.0 V 18 Gp 2.7 V 16 14 1.8 V 7 12 10 NF VCC = 1.8 V 5 8 6 2.7 V -- 3.0 V 4 0 1000 Frequency, f (MHz) 2000 0.1 0.3 1.0 Frequency, f (GHz) 3 3.0 Noise Figure, NF (dB) -40˚C UPC2746T TYPICAL PERFORMANCE CURVES (TA = 25°C) RETURN LOSS vs. FREQUENCY ISOLATION vs. FREQUENCY 10 VCC = 3.0 V Isolation ISOL (dB) Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) 10 0 3.0 V VCC = 1.8 V RLout -10 RLin 3.0 V 1.8 V 0 -20 1.8 V -40 VCC = 3.0 V -20 -60 -30 -80 0.1 0.3 1.0 3.0 0.1 0.3 3.0 POWER vs. FREQUENCY -8.0 0 Output Power, POUT (dBm) Output Power, POUT (dBm) POWER vs. FREQUENCY PSAT -4.0 P1dB VCC = 3.0 V ICC = 7.5 mA 0 Psat -12.0 P1dB VCC = 1.8 V ICC = 4.5 mA -16.0 -8.0 1000 0 2000 1000 Frequency, f (MHz) OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 10 f = 500 10 VCC = 3.3 V MHZ 2000 Frequency, f (MHz) OUTPUT POWER vs. INPUT POWER AND VOLTAGE f = 500 MHZ VCC = 3.0 V Output Power, POUT (dBm) 3.0 V Output Power, POUT (dBm) 1.0 Frequency, f (GHZ) Frequency, f (GHZ) 0 2.7 V -10 1.8 V -20 -30 TA = +85˚ C 0 +25˚ C -40˚ C +25˚ C -10 -40˚ C +85˚ C -20 -30 -40 -40 -50 -40 -30 -20 Input Power, PIN (dBm) -10 0 -50 -40 -30 -20 -10 Input Power, PIN (dBm) 0 UPC2746T TYPICAL SCATTERING PARAMETERS (TA = 25°C) VCC = 3.0 V, ICC = 7.5 mA FREQUENCY S11 (GHz) MAG 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 0.213 0.204 0.197 0.201 0.209 0.219 0.231 0.242 0.255 0.265 0.275 0.286 0.296 0.300 0.296 0.292 0.288 0.285 0.281 0.266 S21 ANG 164.0 146.5 130.0 117.8 106.1 93.9 87.3 76.6 66.3 56.2 45.6 35.5 26.5 18.6 11.5 4.7 -0.5 -4.4 -10.1 -16.2 S12 MAG ANG 9.11 9.30 9.30 9.23 9.17 9.08 8.91 8.75 8.61 8.46 8.15 7.79 7.44 6.98 6.55 6.08 5.63 5.21 4.77 4.25 -6.4 -15.3 -25.0 -34.3 -43.6 -53.0 -62.0 -71.9 -81.5 -91.9 -101.4 -110.5 -119.6 -129.1 -137.8 -146.4 -153.8 -161.5 -168.8 -175.0 MAG 0.001 0.002 0.003 0.004 0.005 0.006 0.008 0.009 0.011 0.012 0.013 0.014 0.015 0.016 0.016 0.016 0.016 0.017 0.017 0.017 K1 S22 ANG MAG ANG 122.7 118.8 114.7 110.5 106.6 102.4 98.8 94.6 90.8 87.2 83.0 79.7 76.0 74.2 72.6 71.0 68.9 67.4 65.8 61.3 0.362 0.359 0.365 0.370 0.378 0.382 0.389 0.389 0.393 0.385 0.381 0.368 0.355 0.335 0.314 0.290 0.264 0.235 0.206 0.180 -2.5 -6.0 -9.2 -12.0 -15.6 -19.7 -23.9 -29.0 -34.8 -40.5 -47.5 -52.4 -58.9 -64.3 -70.1 -75.1 -78.7 -81.4 -83.1 -84.8 S21 (dB) 45.48 22.39 14.88 11.17 8.89 7.41 5.59 5.03 4.13 3.86 3.68 3.59 3.53 3.57 3.88 4.27 4.71 4.88 5.42 6.21 19.2 19.4 19.4 19.3 19.2 19.2 19.0 18.8 18.7 18.5 18.2 17.8 17.4 16.9 16.3 15.7 15.0 14.3 13.6 12.6 K1 S21 VCC = 1.8 V, ICC = 4.5 mA FREQUENCY GHz 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 S11 MAG 0.211 0.255 0.287 0.302 0.316 0.329 0.341 0.352 0.361 0.367 0.372 0.378 0.381 0.375 0.371 0.363 0.355 0.337 0.325 0.312 S21 S12 ANG MAG ANG 11.1 8.5 6.5 3.5 -1.5 -5.5 -9.9 -14.8 -19.2 -25.0 -29.5 -34.3 -38.7 -42.1 -47.2 -51.2 -56.1 -58.5 -61.2 -63.9 5.15 5.11 5.00 4.88 4.73 4.58 4.41 4.17 3.94 3.75 3.57 3.47 3.26 3.13 2.95 2.78 2.60 2.51 2.40 2.28 -8.7 -19.8 -31.2 -41.2 -51.3 -61.1 -69.9 -79.8 -89.1 -100.0 -108.4 -114.7 -122.8 -131.0 -138.5 -145.6 -153.1 -158.7 -166.5 -171.6 Note: 1. K Factor Calculation: 2 2 2 K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 2 |S12 S21| MAG 0.003 0.004 0.006 0.008 0.009 0.011 0.013 0.014 0.015 0.016 0.018 0.019 0.020 0.020 0.021 0.021 0.020 0.020 0.020 0.019 S22 ANG MAG ANG 38.3 43.9 49.3 54.9 59.1 61.0 60.8 59.3 57.0 54.6 49.4 45.7 43.8 42.9 41.9 41.0 40.5 40.1 39.8 39.6 0.355 0.355 0.353 0.346 0.339 0.329 0.321 0.305 0.298 0.277 0.264 0.247 0.237 0.219 0.206 0.187 0.166 0.155 0.136 0.120 -5.3 -10.6 -16.2 -21.1 -26.1 -30.4 -35.8 -40.4 -46.1 -51.3 -56.2 -59.1 -63.7 -65.0 -69.6 -70.4 -71.8 -71.4 -69.7 -69.6 (dB) 26.96 19.92 13.31 10.18 9.29 7.83 6.85 6.75 6.64 6.60 6.18 6.05 6.13 6.49 6.62 7.14 8.14 8.59 9.12 10.25 14.2 14.2 14.0 13.8 13.5 13.2 12.9 12.4 11.9 11.5 11.1 0.8 10.3 9.9 9.4 8.9 8.3 8.0 7.6 7.2 UPC2746T OUTLINE DIMENSIONS (Units in mm) LEAD CONNECTIONS 3 +0.2 1.5 -0.1 2 3 0.95 4 1.9±0.2 2 0.95 5 1 6 +0.2 1.1 -0.1 1 1. 2.. 3. 4. 5. 6. -0.05 0.3 +0.10 C1R +0.2 2.8 -0.3 2.9±0.2 (Bottom View) (Top View) PACKAGE OUTLINE T06 4 4 3 5 5 2 6 6 1 INPUT GND GND OUTPUT GND VCC 0.13±0.1 0.8 0 to 0.1 Note: All dimensions are typical unless otherwise specified. EQUIVALENT CIRCUIT RECOMMENDED P.C.B. LAYOUT (Units in mm) VCC 3.10 OUT IN 3 4 2 0.95 5 ORDERING INFORMATION 1 PART NUMBER 6 0.5 MIN QTY UPC2746T-E3 3K/Reel Note: Embossed Tape, 8 mm wide. 1.0 MIN 1.0 MIN EXCLUSIVE AGENT FOR NEC Corporation RF & MICROWAVE SEMICONDUCTOR PRODUCTS - U.S. & CANADA CALIFORNIA EASTERN LABORATORIES, INC · DATA SUBJECT TO CHANGE WITHOUT NOTICE Headquarters · 4590 Patrick Henry Drive · Santa Clara, CA 95054-1817 · (408) 988-3500 · Telex 34-6393/FAX (408) 988-0279