3 V, SILICON MMIC FREQUENCY CONVERTER FEATURES UPC2757T UPC2758T CONVERSION GAIN vs. LO FREQUENCY VCC = 3 V, LO Power = -5 dBm RF Above LO • WIDE BAND OPERATION UP TO 2.5 GHz • LOW VOLTAGE OPERATION: 2.7 V Minimum 25 • LOW POWER CONSUMPTION: 15 mW (UPC2757T) 200 MHz IF Conversion Gain (dB) • POWER SAVE FUNCTION • SUPER SMALL PACKAGE • TAPE AND REEL PACKAGING OPTION AVAILABLE DESCRIPTION The UPC2757T and UPC2758T are L-Band Frequency Converters manufactured using the NESAT III MMIC process. These products consist of a double balanced mixer, IF amplifier and LO buffer amplifier. The UPC2757T is designed for low power consumption while the UPC2758T is designed for low distortion. Both devices operate on a 3 volt supply voltage making them ideal for portable hand held cellular, GPS, PCN and wireless LAN applications. 20 UPC2758T 400 MHz IF UPC2757T 15 10 5 0 500 1000 1500 2000 2500 LO Frequency (MHz) NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 3 V, VPS = 3 V, PLO = -10 dBm) PART NUMBER PACKAGE OUTLINE SYMBOLS UPC2757T T06 PARAMETERS AND CONDITIONS UPC2758T T06 UNITS MIN TYP MAX MIN TYP MAX 5.6 0.1 7.7 6.6 11 0.1 14.8 ICC Circuit Current, VPS = 3 V VPS = 0.5 V mA µA 3.7 fRF RF Operating Frequency Range (The conversion gain at fRF is not more than 3 dB down from the gain at fRF = 800 MHz, fIF = 130 MHz) GHz 0.1 2.0 0.1 2.0 fIF IF Operating Frequency Range (The conversion gain at fIF is not more than 3 dB down from the gain at fRF = 800 MHz, fIF = 130 MHz) MHz 20 300 20 300 fRF = 800 MHz, fIF = 130 MHz fRF = 2.0 GHz, fIF = 250 MHz dB dB 12 10 15 13 18 16 16 14 fRF = 800 MHz, fIF = 130 MHz fRF = 2.0 GHz, fIF = 250 MHz dB dB 10 13 13 16 Gain1, CG Conversion NF Noise Figure, 19 17 22 20 9 13 12 15 PSAT Saturated Output Power2,fRF = 800 MHz, fIF = 100 MHz dBm -3 +1 PIdB Output Power at 1dB fRF = 800 MHz compression point fIF = 100 MHz Output 3rd Order Intercept Point, (SSB) PLO = -10 dBm fRF = 0.8~2.0 GHz, fIF = 100 MHz dBm -8 -3.5 dBm 0 5 dBm dBm -35 -23 -30 -15 OIP3 ISO RTH (J-A) LO Leakage, fLO = 0.8 ~2.0 GHz at RF pin at IF pin Thermal Resistance (Junction to Ambient) Free Air Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB Notes: 1. PRF = -40 dBm. 2. PRF = -10 dBm. °C/W °C/W 620 230 620 230 California Eastern Laboratories UPC2757T, UPC2758T ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS VCC, VPS UNITS RATINGS V 5.5 mW 280 Supply Voltage Total Power Dissipation2 PT TEST CIRCUIT/BLOCK DIAGRAM UPC2757T, UPC2758T VPS TOP Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +150 LO In 4 3 VCC Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). 2 5 1 6 RF In RECOMMENDED OPERATING CONDITIONS SYMBOLS PARAMETERS IF Out UNITS MIN VCC Supply Voltage V 2.7 TYP MAX 3.0 3.3 TOP Operating Temperature °C -40 +25 +85 PLO LO Input Level dBm -15 -10 -5 All Capacitors 0.1 µF TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2758T CONVERSION GAIN vs. LO FREQUENCY VCC = 3 V, LO Power = -5 dBm RF Above LO UPC2758T OUTPUT POWER vs. IF FREQUENCY VCC = 3 V, LO Power = -5 dBm RF Above LO 4 25 PSAT 20 100 MHz 200 MHz 400 MHz 15 700 MHz 10 0 Power (dBm) Conversion Gain (dB) 25 MHz 50 MHz P1dB -8 1000 MHz 5 -4 IF -12 0 0 500 1000 1500 2000 200 2500 400 600 800 1000 LO Frequency (MHz) IF Frequency (MHz) UPC2758T LO TO IF ISOLATION vs. LO FREQUENCY VCC = 3 V UPC2758T UP-CONVERSION GAIN vs. LO FREQUENCY VCC = 3 V, LO Power = -5 dBm Input Above LO -10 15 0 dBm -10 dBm -20 -15 dBm -25 LO Power Input 1000 MHz Conversion Gain (dB) LO Power at IF Port (dBm) -5 dBm -15 10 1500 MHz 5 2000 MHz 2500 MHz 0 Output Freq -30 200 200 400 600 800 LO Frequency (MHz) 400 600 1000 LO Frequency (MHz) 800 1000 UPC2757T, UPC2758T TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2757T CONVERSION GAIN vs. LO FREQUENCY VCC = 3 V, LO Power = -5 dBm RF Above LO UPC2757T OUTPUT POWER vs. IF FREQUENCY VCC = 3 V, LO Power = -5 dBm RF Above LO 20 0 25 MHz 50 MHz 100 MHz PSAT -4 Power (dBm) Conversion Gain (dB) 200 MHz 15 400 MHz 10 700 MHz -8 P1dB -12 5 IF -16 0 1500 1000 500 2000 2500 200 400 600 800 1000 LO Frequency (MHz) IF Frequency (MHz) UPC2757T LO TO IF ISOLATION vs. LO FREQUENCY VCC = 3 V UPC2757T UP-CONVERSION GAIN vs. LO FREQUENCY VCC = 3 V, LO Power = -5 dBm Input above LO -10 15 1000 MHz Conversion Gain (dB) LO Power at IF Port (dBm) 0 dBm -15 -5 dBm -20 -10 dBm -15 dBm -25 LO Power Input -30 10 1500 MHz 5 2000 MHz 0 2500 MHz Output Freq -5 200 600 400 800 200 1000 LO Frequency (MHz) 400 800 1000 LO Frequency (MHz) UPC2757T CONVERSION GAIN vs. LO POWER IF = 200 MHz, VCC = 3 V RF Above LO UPC2757T CONVERSION GAIN vs. LO FREQUENCY IF = 200 MHz, LO Power = -5 dBm RF Above LO 20 20 VCC = 5 V Conversion Gain (dB) Conversion Gain (dB) 600 15 VCC = 3 V 10 500 1000 1500 2000 LO Frequency (MHz) 2500 LO = 1000 MHz 15 LO = 2000 MHz 10 -40 -30 -20 LO Power (dBm) -10 0 UPC2757T, UPC2758T UPC2757T AND UPC2758T PORT IMPEDANCES 5 1 1 6 3 2 4 2 3 5 4 RF port and LO port VCC = 3.0 V 1: 100 MHz 330.7 Ω - j861.6 Ω 2: 500 MHz 38.8 Ω - j194.3 Ω 3: 900 MHz 25.5 Ω - j107.6 Ω 4: 1500 MHz 20.5 Ω - j60.7 Ω 5: 1900 MHz 17.9 Ω - j44.2 Ω 6: 3000 MHz 19.5 Ω - j16.3 Ω IF port VCC = 3.0 V 1: 50 MHz 21.4 Ω + j2.4 Ω 2: 80 MHz 21.8 Ω + j5.5 Ω 3: 130 MHz 23.1 Ω + j9.4 Ω 4: 240 MHz 27.4 Ω + j16.3 Ω 5: 300 MHz 30.6 Ω + j19.1 Ω OUTLINE DIMENSIONS (Units in mm) RECOMMENDED P.C.B. LAYOUT (Units in mm) PACKAGE OUTLINE T06 3.10 +0.2 2.8 -0.3 +0.2 1.5 -0.1 0.95 3 0.95 4 1.9±0.2 2 0.95 5 1 6 2.9±0.2 +0.2 1.1 -0.1 4 3 5 1 6 0.5 MIN 1.0 MIN 1.0 MIN -0.05 0.3 +0.10 0.13±0.1 0.8 2 LEAD CONNECTIONS (Top View) 0 to 0.1 (Bottom View) Note: All dimensions are typical unless otherwise specified. ORDERING INFORMATION PART NUMBER QTY UPC2757T-E3 3K/Reel UPC2758T-E3 3K/Reel Note: Embossed Tape, 8 mm wide, Pins 1, 2, 3 are in tape pull-out direction. EXCLUSIVE NORTH AMERICAN AGENT FOR 2 1 1. RF INPUT 2. GND 3. LO INPUT 4. PS 5. VCC 6. IF OUTPUT C1X 3 4 4 3 5 5 2 6 6 1 Note: Package Markings: C1X: UPC2757T C1Y: UPC2758T RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM PRINTED IN USA ON RECYCLED PAPER -6/97 DATA SUBJECT TO CHANGE WITHOUT NOTICE