NJW1138 P R E L I M I N A LY AUDIO PROCESSOR ■ GENERAL DESCRIPTION The NJW1138 is an audio processor. It includes all of functions processing audio signal for TV, such as tone control, balance, volume, mute, NJRC original surround, and AGC functions. The NJRC original surround system reproduces natural surround sound and clear vocal orientation. 2 All of internal status and variables are controlled by I C BUS interface. ■ PACKAGE OUTLINE NJW1138L NJW1138M ■ FEATURES ● Operating Voltage 8 to 13V 2 ● I C BUS Interface ● AGC Circuit (It reduces volume difference among input sources.) ● eala(NJRC Original Surround) ● Simulated Surround ● Bi-CMOS Technology ● Package Outline SDIP30, SDMP30 ■ BLOCK DIAGRAM VOL1 TONE VOL2 I2C Bus Interface eala & Sim ulated Surround AGC VOL1 TONE VOL2 Bias - 1 –F NJW1138 ■ PIN FUNCTION No. Symbol 1 INa INb 30 2 NC NC 29 3 NC NC 28 4 OUT1a OUT1b 27 5 IN2a IN2b 26 6 TONE-Ha TONE-Hb 25 7 TONE-La TONE-Lb 24 8 OUT2a OUT2b 23 9 AGC SR-FIL 22 VREF 21 10 SS-FIL 11 CVB CTH 20 12 CVA CTL 19 13 SDA AUX0 18 14 SCL AUX1 17 15 GND Vcc 16 Function No Symbol Function 1 IN1a Ach Input 16 Vcc Power Supply Pin 2 NC Non Connect 17 AUX1 Auxiliary Output1 3 NC Non Connect 18 AUX0 Auxiliary Output0 4 OUT1a Ach Output for the Other Accessories 19 CTL DAC Output for Tone Low Frequency 5 IN2a Ach Input From the Other Accessories 20 CTH DAC Output for Tone High Frequency 6 TONE-Ha Ach Treble Filter 21 VREF Reference Voltage 7 TONE-La Ach Bass Filter 22 SR-FIL NJRC Original Surround Filter 8 OUT2a Ach Output 23 OUT2b Bch Output 9 AGC AGC Filter 24 TONE-Lb 10 SS-FIL 11 CVB Bch Bass Filter Simulated Stereo Filter 25 TONE-Hb DAC Output for Bch Volume & Balance 26 IN2b Bch Input from the Other Accessories Bch Treble Filter Bch Output for the Other Accessories 12 CVA DAC Output for Ach Volume & Balance 27 OUT1b 13 SDA SDA Data Input (I2C BUS) 28 NC Non Connect 14 SCL SCL Data Input (I2C BUS) 29 NC Non Connect 15 GND GND 30 IN1b -2- Bch Input NJW1138 ■ ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER SYMBOL + RATING UNIT 14 V Supply Voltage V Power Dissipation PD 700 mW Operating Temperature Range Topr -20 to +75 °C Storage Temperature Range Tstg -40 to +125 °C ■ ELECTRICAL CHARACTERISTICS ( Ta=25°C, V+=9V, Rg=600Ω, RL=47kΩ, Vin=100mVrms/1kHz unless otherwise specified) PARAMETER SYMBOL TEST CONDITION + MIN. TYP. MAX. UNIT 8.0 9.0 13.0 V Operating Voltage V Supply Current ICC No Signal - 10 25 mA VREF No Signal 4.0 4.5 5.0 V 2.8 3.0 - Vrms - 2.5 - Vrms Reference Voltage Maximum Input Voltage VIM VOL=-20dB,THD=1% Maximum Output Voltage VOM OUTPUT VOL=0dB,THD=1% Channel Balance GCB VOL=0dB -1.5 0.0 1.5 dB Balance Boost A BABST CHS=”0”,BAL=”11111” -2.0 0.0 2.0 dB Balance Cut A BACUT CHS=”1”,BAL=”11111” Vin = 1Vrms - - -70 dB Balance Boost B BBBST CHS=”1”,BAL=”11111” -2.0 0.0 2.0 dB Balance Cut B BBCUT - - -70 dB - - 0.5 % -2.0 0.0 2.0 dB Total Harmonic Distortion THD CHS=”0”,BAL=”11111” Vin = 1Vrms Vo=0.5Vrms BW=400Hz to 30kHz Maximum Gain GVMAX VOL= 0dB Minimum Gain GVMIN VOL= MUTE - - -70 dB CS Vin = 2Vrms - - -70 dB VOL = 0dB BW=400Hz to 30kHz VOL = MUTE BW = 400Hz to 30kHz - -90 (31.6) -106 (5.0) Logic Output : High 4.5 - 5.0 Logic Output : Low 0 - 0.3 Channel Separation Output Noise 1 VNO1 Output Noise 2 VNO2 AUX Output Voltage VAUX -85 (56.2) -96 (15.8) dBV (µVrms) dBV (µVrms) V BW : Band Width -3- NJW1138 ♦ TONE CONTROL PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT High Frequency Boost HFBST BCT=”1”,TREB=”1111”, f=10kHz 12.5 15.0 17.5 dB High Frequency Flat HFFLT TRBE=”0000”,f=10kHz -2.0 0.0 2.0 dB High Frequency Cut HFCUT -17.5 -15.0 -12.5 dB Low Frequency Boost LFBST 12.5 15.0 17.5 dB Low Frequency Flat LFFLT BASS=”0000”,f=100Hz -2.0 0.0 2.0 dB LFCUT BCB=”0”,BASS=”1111”, f=100Hz -17.5 -15.0 -12.5 dB MIN. TYP. MAX. UNIT 2.0 3.0 4.0 dB -4.0 -3.0 -2.0 dB 2.0 3.0 4.0 dB -4.0 -3.0 -2.0 dB MIN. TYP. MAX. UNIT Low Frequency Cut BCT=”0”,TRBE=”1111”, f=10kHz BCB=”1”,BASS=”1111”, f=100Hz ♦ SUB-TONE CONTROL PARAMETER SYMBOL High Frequency Boost SHFBST High Frequency Cut SHFCUT Low Frequency Boost SLFBST Low Frequency Cut SLFCUT TEST CONDITION BCST=”1”, SUB-TREB=”11”,f=10kHz BCST=”0”, SUB-TREB=”11”,f=10kHz BCSB=”1”, SUB-BASS=”11”,f=100Hz BCSB=”0”, SUB-BASS=”11”,f=100Hz ♦ AGC CONTROL(AGC-ON) PARAMETER SYMBOL TEST CONDITION AGC Boost AGCBST Vin=50mVrms, f=1kHz 1.5 3.5 5.5 dB AGC Flat1 AGCFLT1 Vin=150mVrms, f=1kHz -2.5 0.0 2.5 dB AGC Flat2 AGCFLT2 Vin=300mVrms, f=1kHz -2.5 0.0 2.5 dB AGC Flat3 AGCFLT3 Vin=400mVrms, f=1kHz -2.5 0.0 2.5 dB AGC Flat4 AGCFLT4 Vin=540mVrms, f=1kHz -2.5 0.0 2.5 dB AGC Cut AGCCUT Vin=2Vrms, f=1kHz -14 -10 -6.0 dB MIN. TYP. MAX. UNIT 6.0 8.0 10.0 dB 1.6 3.6 5.6 dB 10.7 12.7 14.7 dB 8.4 10.4 12.4 dB 1.0 3.0 5.0 dB 1.0 3.0 5.0 dB ♦ SURROUND (SURROUND-ON) PARAMETER SYMBOL Surround Gain1 SRGAIN1 Surround Gain2 SRGAIN2 Surround Gain3 SRGAIN3 Surround Gain4 SRGAIN 4 Simulated Surround Gain1 SRSIM1 Simulated Surround Gain2 SRSIM2 -4- TEST CONDITION Ain→Aout, f=100Hz SUR0=”0”, SUR=”1” Ain→Bout, f=100Hz SUR0=”0”, SUR=”1” Ain→Aout, f=100Hz SUR0=”1”, SUR=”1” Ain→Bout, f=100Hz SUR0=”1”, SUR=”1” Ain+Bin→Aout, f=1kHz SUR0=”1”, SUR=”0” Ain+Bin→Bout, f=1kHz SUR0=”1”, SUR=”0” NJW1138 2 ■ I C BUS BLOCK CHARACTERISTICS (SDA,SCL) PARAMETER SYMBOL MIN. TYP. MAX. UNIT High Level Input Voltage VIH 3.0 - 5.0 V Low Level Input Voltage VIL 0 - 1.5 V High Level Input Current IIH - - 10 µA Low Level Input Current IIL - - 10 µA Low Level Output Voltage (3mA at SDA pin) VOL 0 - 0.4 V Maximum Output Current IOL -3.0 - - mA Maximum Clock Frequency fSCL 0 - 100 kHz Data Change Minimum Waiting Time tBUF 4.7 - - µs tHD:STA 4.0 - - µs Low Level Clock Pulse Width tLOW 4.7 - - µs High Level Clock Pulse Width THIGH 4.0 - - µs Minimum Start Preparation Waiting Time tSU:STA 4.7 - - µs Minimum Data Hold Time tHD:DAT 5.0 - - µs Minimum Data Preparation Time tSU:DAT 250 - - ns Rise Time tR - - 1.0 µs Fall Time tF - - 300 ns tSU:STO 4.7 - - µs Data Transfer Start Minimum Waiting Time Minimum Stop Preparation Waiting Time 2 I C BUS Load Condition: Pull up resistance 4kΩ (Connected to +5V) Load capacitance 200pF (Connected to GND) SDA tR tBU tF tHD:ST SCL tHD:ST P S tLOW tHD:DA tHIGH tSU:ST tSU:DA Sr tSU:ST P -5- NJW1138 TERMINAL DESCRIPTION No. SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE V+ 1,30 pin 1 30 INa INb 20k Ach Input terminal Bch Input terminal V+/2 80k Vref 4 8 23 27 OUT1a OUT2a OUT2b OUT1b Ach Output for the Other Accessories Ach Output Bch Output Bch Output for the Other Accessories 50 V+/2 FB 5.3 k 10 SS-FIL Simulated Stereo Filter terminal FB 6 25 TONE-Ha TONE-Hb Treble(tone control) filter terminal FB 7 24 TONE-La TONE-Lb Bass(tone control) filter terminal FB 10pin V+/2 10k 12k -6- 4, 8 23,27pin 12k 6, 25pin V+/2 7, 24pin V+/2 NJW1138 TERMINAL DESCRIPTION No. SYMBOL FUNCTION 9 AGC Capacitor connection terminal for AGC attack and recovery time setting 11 12 CVB CVA DAC output terminal for Bch volume control DAC output terminal for Ach volume control EQUIVALENT CIRCUIT VOLTAGE 9pin 400 4k 400 11,12pin - 8k - 5V 13 SDA 13pin 4k 2 I C data terminal - 8k 5V 14 SCL 14pin 4k 2 I C clock terminal - 8k 5,26pin 5 26 TONE INa TONE INb Ach Input from the Other Accessories Bch Input from the Other Accessories 24k V+/2 -7- NJW1138 TERMINAL DESCRIPTION No. SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE 200k 21pin 21 Vref Reference voltage terminal V+/2 5V 17,18pin 17 18 AUX0 AUX1 Auxiliary 2 values voltage output terminal 20 19 CTH CTL DAC output for tone control terminal 22 SR-FIL eala filter terminal 15 16 V+ GND Ground terminal Supply voltage terminal -8- 0/5V 19pin FB 36k 1.8k - - 22pin V+/2 - NJW1138 ■ APPLICATION CIRCUIT 4.7µ 4.7µ 4.7µ 4.7µ IN1b 30 NC NC 29 3 NC NC 28 4 OUT1a OUT1b 27 5 IN2a IN2b 26 1 IN1a 2 4.7µ 4.7µ 4.7n 6 TONE-Ha TONE-Hb 25 4.7n 100n 7 TONE-La TONE-Lb 24 100n 8 OUT2a OUT2b 23 1µ 9 AGC SR-FIL 22 100n 100n 10 SS-FIL VREF 21 4.7µ 4.7µ 11 CVB CTH 20 4.7µ 4.7µ 12 CVA CTL 19 4.7µ 13 SDA AUX0 18 14 SCL AUX1 17 15 GND Vcc 16 4.7µ 4.7µ 22µ -9- NJW1138 2 ■ DEFINITION OF I C REGISTER 2 ♦ I C BUS FORMAT MSB S LSB Slave Address 1bit 8bit MSB LSB A Select Address 1bit 8bit MSB A 1bit LSB Data A P 8bit 1bit 1bit S: Starting Term A: Acknowledge Bit P: Ending Term ♦ SLAVE ADDRESS MSB LSB 1 0 0 0 0 0 1 R/W R/W=0: Receive Only R/W=1: No Output Data ♦ CONTROL REGISTER TABLE The select address sets each function (Volume, Balance, AGC, Surround, Tone Control, AUX). The auto increment function cycles the select address as follows. 00H→01H→02H→03H→04H→05H→00H Select Address BIT D7 D6 D5 D4 00H D3 D2 D1 D0 AGC SUR VOL 01H CHS 02H BCB BASS BCSB SUB-BASS 03H BCT TREB BCST SUB-TREB (✴) 04H 05H BAL 0 0 0 0 0 0 OUT Don’t care Don’t care SUR0 AGC1 AGC0 (✴) 0 0 AUX1 AUX0 Please send the data only “0” ♦ CONTROL REGISTER DEFAULT VALUE Control register default value is all “0”. Select Address - 10 - BIT D7 D6 D5 D4 D3 D2 D1 D0 00H 0 0 0 0 0 0 0 0 01H 0 0 0 0 0 0 0 0 02H 0 0 0 0 0 0 0 0 03H 0 0 0 0 0 0 0 0 04H 0 0 0 0 0 0 0 0 05H 0 0 0 0 0 0 0 0 NJW1138 INSTRUCTION CODE a) MASTER VOLUME SETTING Select Address BIT D7 D6 D4 D5 00H D3 D2 D1 D0 VOL The volume control for both Ach and Bch(0.33dB/step). The volume is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. b) BALANCE, AGC AND SURROUND SETTING BIT Select Address D7 01H CHS D6 D4 D5 D3 D2 BAL D1 D0 AGC SUR •CHS : Channel select for balance control “0” : Ach “Bch is attenuated” “1” : Bch “Ach is attenuated” •BAL : Balance control for both Ach and Bch(1dB/Step) The balance is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. •AGC : AGC switch “0” : AGC OFF “1” : AGC ON (Default Setting : 150mVrms) •SUR : Surround mode switch “0” : Surround OFF “1” : Surround ON(Default Setting : Surround Effect1) c)TONE CONTROL BASS SETTING BIT Select Address D7 02H BCB D6 D4 D5 BASS D3 D2 BCSB D1 D0 SUB-BASS •BCB : Boost cut select for Bass control “0” : Cut “1” : Boost •BASS: BASS control Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) •BCSB : Boost cut select for SUB-BASS control “0” : Cut “1” : Boost •SUB-BASS: SUB- BASS control(1dB/Step) Sub-Cut Level : -3dB to 0dB(1dB/Step) Sub-Boost Level : 0dB to +3dB(1dB/Step) - 11 - NJW1138 d) TONE CONTROL TREBLE SETTING BIT Select Address D7 03H BCT D6 D4 D5 D3 TREB D2 BCST D1 D0 SUB-TREB •BCT : Boost cut select for Treble control “0” : Cut “1” : Boost •TREB: Treble control(1dB/step) Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) •BCST : Boost cut select for Sub-Treble control “0” : Cut “1” : Boost •SUB-TREB: Sub-Treble control(1dB/step) Sub-Cut Level : -3dB to 0dB(1dB/Step) Sub-Boost Level : 0dB to +3dB(1dB/Step) e)OUTPUT AND AUXILIARY SETTING BIT Select Address D7 D6 D5 D4 D3 D2 D1 D0 05H OUT Don’t Care Don’t Care SUR0 AGC1 AGC0 AUX1 AUX0 •OUT: ON/OFF Switch for OUTPUT “0” : OFF “1” : ON •Surround Setting Surround Function SUR0(05H:D4) SUR(01H:D0), Surround OFF 0 0 Surround Effect1 0 1 Surround Effect2 1 1 Simulated Stereo 1 0 •AGC Level Setting AGC Level AGC1(D3) AGC0(D2) 150mVrms 0 0 300mVrms 0 1 400mVrms 1 0 540mVrms 1 1 •AUX1/AUX0: Auxiliary port High/Low “0” : Logic output ”Low” “1” : Logic output ”High” - 12 - Remarks Surround OFF Surround Effect Small ( 8.0dB typ. ) Surround Effect Large (12.7dB typ. ) Monaural to Stereo NJW1138 MASTER VOLUME (Select Address : 00H) VOL Gain(dB) HEX D7 D6 D5 D4 D3 D2 D1 D0 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - 13 - NJW1138 MASTER VOLUME (Select Address : 00H) VOL Gain(dB) HEX D7 D6 D5 D4 D3 D2 D1 D0 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 -81 -82 -83 -84 Mute 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 0C 09 06 03 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 - 14 - NJW1138 BALANCE(Select Address : 01H) Channel Select (CHS) D7 Ach(Bch is attenuated) 0 Bch(Ach is attenuated) 1 BAL Gain(dB) D6 D5 D4 D3 D2 0 0 0 0 0 0 -1 0 0 0 0 1 -2 0 0 0 1 0 -3 0 0 0 1 1 -4 0 0 1 0 0 -5 0 0 1 0 1 -6 0 0 1 1 0 -7 0 0 1 1 1 -8 0 1 0 0 0 -9 0 1 0 0 1 -10 0 1 0 1 0 -11 0 1 0 1 1 -12 0 1 1 0 0 -13 0 1 1 0 1 -14 0 1 1 1 0 -15 0 1 1 1 1 -16 1 0 0 0 0 -17 1 0 0 0 1 -18 1 0 0 1 0 -19 1 0 0 1 1 -20 1 0 1 0 0 -21 1 0 1 0 1 -22 1 0 1 1 0 -23 1 0 1 1 1 -24 1 1 0 0 0 -25 1 1 0 0 1 -26 1 1 0 1 0 -27 1 1 0 1 1 -28 1 1 1 0 0 -29 1 1 1 0 1 -30 1 1 1 1 0 Mute 1 1 1 1 1 - 15 - NJW1138 TONE CONTROL BASS (Select Address : 02H) Bass Cut or Boost BCB D7 Cut 0 Boost 1 BASS Cut Gain(dB) Boost Gain(dB) D6 D5 D4 D3 -15 15 1 1 1 1 -14 14 1 1 1 0 -13 13 1 1 0 1 -12 12 1 1 0 0 -11 11 1 0 1 1 -10 10 1 0 1 0 -9 9 1 0 0 1 -8 8 1 0 0 0 -7 7 0 1 1 1 -6 6 0 1 1 0 -5 5 0 1 0 1 -4 4 0 1 0 0 -3 3 0 0 1 1 -2 2 0 0 1 0 -1 1 0 0 0 1 0 0 0 0 0 0 TONE CONTROL SUB-BASS (Select Address : 02H) Sub-Bass Cut or Boost BCSB D2 Cut 0 Boost 1 SUB-BASS Cut Gain(dB) Boost Gain(dB) D1 D0 -3 3 1 1 -2 2 1 0 - 16 - -1 1 0 1 0 0 0 0 NJW1138 TONE CONTROL TREBLE (Select Address : 03H) Treble Cut or Boost BCT D7 Cut 0 Boost 1 TREB Cut Gain(dB) Boost Gain(dB) D6 D5 D4 D3 -15 15 1 1 1 1 -14 14 1 1 1 0 -13 13 1 1 0 1 -12 12 1 1 0 0 -11 11 1 0 1 1 -10 10 1 0 1 0 -9 9 1 0 0 1 -8 8 1 0 0 0 -7 7 0 1 1 1 -6 6 0 1 1 0 -5 5 0 1 0 1 -4 4 0 1 0 0 -3 3 0 0 1 1 -2 2 0 0 1 0 -1 1 0 0 0 1 0 0 0 0 0 0 TONE CONTROL SUB-TREBLE (Select Address : 03H) Sub-Treble Cut or Boost BCST D2 Cut 0 Boost 1 SUB-TREB Cut Gain(dB) Boost Gain(dB) D1 D1 -3 3 1 1 -2 2 1 0 -1 1 0 1 0 0 0 0 - 17 - NJW1138 TYPICAL CHARACTERISTICS S upply Current vs Supply Voltage Su pply Current vs T emparature T a=25degC V+=9V 15 16 Supply C urrent [m A] Supply C urrent [m A] N JW 1137 14 N JW 1137 10 NJW 1138 5 12 10 NJW 1138 8 0 6 0 5 10 15 0 Supply C urren t [H z] Referen ce Voltage vs Supply Voltage V+=9V 8 5 Reference V oltage [V] Reference V oltage [V] 100 Reference Voltage vs T emp arature T a=25degC 6 4 2 0 4.8 4.6 4.4 4.2 4 0 5 10 15 0 50 100 Supply Voltage [V] Tem parature [degC] Gain vs Volum e Contro l G ain vs B alance Control V+ =9V , V in(Ach)=1V rm s,f=1kH z, OU TPUT,Rg=600ohm V +=9 V, Vin=1V rm s, f=1 kH z, R g=600ohm 0 0 -20 -20 Gain [dB] Gain [dB] 50 Tem parature [degC] -40 -60 -80 -40 Vo(Bch) 75, 25, -20degC Vo(Ach ) 75, 25, -20degC -60 -80 75,2 5,-20degC -100 -100 0 50 100 150 200 Volum e C ontrol [dec] - 18 - 250 0 25 50 Balance Control [dec] NJW1138 TYPICAL CHARACTERISTICS T .H.D.+N vs Input Voltage T .H.D.+N vs Input Voltage V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OU TPU T Rg =600ohm, BW =400Hz-30kH z, T a=25degC 100 10 -30dB TH D+N [ % ] TH D+N [ % ] 10 V+=9V, Vin(Ach), f=1kH z, Vo (Ach)OU TP U T R g=600ohm , BW =400Hz-30kHz, Vol=-20dB 100 1 0.1 25degC -20degC 1 0.1 -20dB -10dB 0.01 0.01 75degC 0dB 0.1 0.01 0.01 1 T .H.D+N vs O utp ut Voltage T .H.D+N vs O utp ut Voltage V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTP UT R g=600ohm, BW =400Hz-30kH z, V ol=0dB 100 10 THD +N [ % ] 10 THD +N [ % ] 1 Input Voltage [Vrms] V +=9V, Vin(Ach), f=1kH z, Vo (Ach)OU TPU T Rg =600ohm , BW =400Hz-30kHz, T a=25degC 100 -30dB 1 0.1 -20degC 1 25degC 0.1 -20dB 0.01 0.01 -10dB 0.1 75degC 0dB 0.01 0.01 1 0.1 1 Output Voltage [Vrms] Output Voltage [Vrms] Ch annel Separation vs Frequen cy Gain vs Frequency (MU T E) V+=9V, Vin(Ach)=1Vrm s, Vol=MU TE Vo(Ach)O UTPUT, Rg=600 ohm, T a=25degC 120 V +=9V, Vin=2V rms, f=1kH z, Vo=OU TPU T R g=600 ohm, Vo l=0dB, T a=25degC 100 100 80 [Hz] 80 60 Vin(Ach)-V o(Bch) Vin(Bch)-V o(Ach) Gain C hannel Separation [H z] 0.1 Input Voltage [Vrms] 40 60 40 20 20 0 100 1000 Freqency [H z] 4 10 0 100 1000 4 10 Frequency [H z] - 19 - NJW1138 TYPICAL CHARACTERISTICS AG C C ontrol AGC Contro l V+=9V, Vin(Ac h+Bch), f=1kH z, Vo (Ach)OU TPU T R g=600 ohm, T a=25degC 1 Output Voltage [Vrms] Output Voltage [Vrms] Lv4 Lv3 1 0.1 Lv1 Lv2 0.01 OFF 0.001 0.001 0.01 V+=9V, Vin(Ac h+Bch), f=1kH z, Vo (Ach)OU TPU T R g=600ohm , Flat Level:0.15Vrm s 0.1 75, 25, -20degC 0.1 0.01 0.001 0.001 1 Input Voltage [Vrms] AGC Attack T im e V+=9V, Vin(Ac h+B ch)=1Vrm s, f=10kH z,Vo (Ach)OU TPU T AG C level= 0.15V,R g=600ohm ,T a=25degC 0.2 1.5 0.15 1 0.1 Output Voltage [V] Output Voltage [V] 1 AG C Recovery T ime 0.5 0 -0.5 -1 -1.5 0.05 0 -0.05 -0.1 -0.15 -2 -0.2 0 2 4 6 8 10 Tim e [m sec] V+=9V , R g=600ohm, BW =400H z-30kHz -40 -60 Vol=0dB -80 -100 Vol=MUTE -120 0 50 Tem parature [degC] 0 120 240 360 Tim e [m sec] Output Noise vs T emparature Output Noise [dBV] 0.1 Input Voltage [Vrms] V+=9V, Vin(Ach+Bch)=1Vrm s,f=20kHz,Vo (Ach)OU TPU T AGC level=0.15V,Rg=600 ohm,Ta=25degC 2 - 20 - 0.01 100 480 600 NJW1138 TYPICAL CHARACTERISTICS Gain vs Frequency (T ON E) Gain vs Frequency (T ON E) V+=9V, Vin(Ach)=0.1Vrms,Gv=+15,0,-15dB Vo(Ach), R g=600ohm V+=9V, Vin(Ach)=0.1Vrm s,Gv:3dB steps Vo(Ac h), Rg=600 ohm, T a=25degC 20 20 +15dB 10 Gain [d B] Gain [dB] 10 75degC 25degC 0 -10 -20degC 0 25degC -10 -20degC -15dB 75degC -20 100 1000 10 4 Frequency [H z] -20 100 1000 4 10 Frequency [H z] Gain vs F requ ency (Eala & Simulated ) V+ =9V, Vin(Ach)=0.1Vrms, Vo(Ach), R g=600ohm 10 Su r1(Ain-Ao ): 75 ,2 5,-20 de gC Gain [ dB ] 5 SIM [(A+B)in-Aou t] :75 ,2 5,-20de gC 0 -5 Sur1(Bin-Ao):75,25,-20 degC -10 100 1000 Frequency 10 4 [H z] ■NOTE 2 Purchase of I C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies 2 2 conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided that 2 the system conforms to the I C Standard Specification as defined by Philips. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - 21 -