NTE NTE743

NTE743
Integrated Circuit
Phase Lock Loop (PLL) Stereo Decoder
Description:
The NTE743 requires only a single, non critical resistive tuning adjustment. This device derives left
and right audio channels from the standard composite stereo decoder can also be used in a number
of subscription TV decoder schemes or in various proposed TV stereo systems.
Using phase–lock techniques, the subcarrier (38 KHz for FM stereo) is regenerated in phase with and
at exactly twice the frequency of the transmitted pilot signal. Switching between monaural and stereo
operation is accomplished automatically by the presence of the pilot signal.
Low–impedance emitter–follower outputs and an internal voltage regulator for increased stability
make the NTE743 suitable for both line–operated and automotive applications. It is designed to operate over a wide supply–voltage range and will function with supplies as low as 9V.
Features:
D
D
D
D
D
D
D
Internal Temperature Compensation
Single–Adjustment Tuning
Automatic Stereo/Mono Switching
Stereo Indicator Lamp Driver
70dB SCA Rejection
Operating Voltage– 9 to 16V
Low Harmonic Distortion
Absolute Maximum Ratings:
Supply Voltage, VCC
Continous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +16V
≤15s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +22V
Lamp Supply Voltage, VLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +22V
Lamp Current, ILAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150mA
Output Current, I4 or I5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA
Package Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670mW
Derate Above 70°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3mW/°C
Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Electrical Characteristics:
(TA = +25°C, VCC = +12V, Composite Input = 300mVrms (L = R, Pilot OFF), Pilot Level = 30mVrms,
fm = 400Hz or 1KHz, unless otherwise indicated)
Test Conditions
Characteristics
Min
Typ
Max
Unit
Input Impedance
Pin2
2
353
–
kΩ
Output Impedance
Pin4 or Pin5
–
50
–
Ω
Audio Voltage Gain
Desired Channel
0.7
1.0
1.4
V
Stereo Channel Separation
fm = 100Hz
–
30
–
dB
fm = 400Hz
30
40
–
dB
fm = 10kHz
–
30
–
dB
Monaural Channel Balance
Pilot Level = 0V
–
0.1
1.5
dB
Total Harmonic Distortion
Multiplex Level = 600mV
–
0.4
1.5
%
Ultrasonic Frequency Rejection 19kHz
25
35
–
dB
38kHz
25
40
–
dB
SCA Rejection
67KHz, Note 1
–
70
–
dB
Stereo Switch Level
Pilot Only, Lamp On
–
14
25
mVrms
Pilot Only, Lamp Off
2.0
7.0
–
mVrms
VCO Tuning Resistance
Pin15, Note 2
20
23
26
kΩ
VCO Frequency Drift
–20°C < TA < +25°C
–
±0.5
±2.0
%
+25°C < TA < +70°C
–
±0.5
±2.0
%
3.0
6.0
–
dB
Stereo Lamp Hysteresis
Lamp Off to Lamp On
Capture Range
Permissable Tuning Error
–
4.0
–
%
Output Voltage Shift
Stereo to Mono Operation
–
±30
–
mV
Lamp Output Current
Short Circuit, Lamp On
50
100
–
mA
Lamp Off
–
1.0
100
mA
Lamp Driver Terminal Voltage
ILAMP = 50mA
–
1.3
2.0
V
Supply Current
Lamp Off
–
20
40
mA
Power Supply Rejection
200Hz, 200mVrms
–
40
–
dB
Note 1. Measured with a stereo composite signal of 80% stereo, 10% pilot, and 10% SCA.
Note 2. Total resistance from Pin15 to GND, to set reference frequency at Pin11 to 19kHz ±10Hz
Pin Connection Diagram
Composite Input
1
16 VCC
Audio Amp Output
Left Load &
De–Emphasis
Left Output
2
15 VCO Control
3
14 Loop Filter
4
13 Loop Filter
Right Output
5
12 Phase Det Input
Right Load &
De–Emphasis
Lamp Driver
6
11 Pilot Monitor
7
10 Threshold Filter
GND
8
9
16
Threshold Filter
9
.260 (6.6) Max
1
8
.300
(7.62)
.785 (19.9)
Max
.200 (5.08)
Max
.245
(6.22)
Min
.100 (2.54)
.700 (17.7)