Imaging D A T A S H E E T Lighting Telecom Machine Vision Illumination Systems MVS-4000 Machine Vision Strobe Description Features The PerkinElmer MVS 4000 Mini Strobe produces high intensity, short duration light pulses for industrial vision applications. Operated in conjunction with a CCD/CID solid state video camera, this unit front-lights or back-lights objects, freezes motion, and eliminates blur, thus enhancing image quality. • Flash Rates to 50 Hz • 6 Microsecond Flash Duration • Small/Light Weight • Simple Installation and Operation The MVS 4000 operates from an input voltage of 12 VDC. The trigger input circuit is optically isolated, requiring a 5 volt pulse to flash. The metal enclosure contains a printed circuit module, a 0.75 inch arc quartz flashlamp, and reflector. Inputs are made via a 9-pin connector located on the rear of the strobe. . www.perkinelmer.com/opto MVS-4000 Mini Strobe Optical Specifications 300 to 1100+ nm Spectral bandwidth (1) 50 Hz maximum Flash rate >108 flashes Flashlamp life (3) Flash duration (2) 6 microseconds Flash to flash variation < 5% Illumination Characteristics Area Illuminated 6 in. x 8 in. 12 in. x 16 in. 20 in. x 23 in. 36 in. x 48 in. Distance 6 inches 1 foot 2 feet 3 feet Note 1: Note 2: Note 3: Note 4: Photometric 19 lux-sec 5.7 lux-sec 1.5 lux-sec 0.6 lux-sec Radiometric 15 x 10-6 J/cm2 4.5 x 10-6 J/cm2 1.2 x 10-6 J/cm2 0.5 x 10-6 J/cm2 Spectral bandwidth may be extended into the ultraviolet by using other flashlamp envelope and enclosure window materials. Measured at 1/3 of peak value. Prior to light output decreasing to 70% of the initial value. Lux-sec - Lumen sec/m2 Physical Specifications Size Weight Mounting Inches (millimeters) 5.20 (132) L x 3.06 (78) W x 2.00 (51) H 0.75 lbs (0.34 kg) 1/4-20 threaded socket in base Provision for internal optical filter included Electrical Specifications Input voltage Input current Flashlamp voltage Discharge capacitor Discharge energy Discharge power Tirgger input: (1) Trigger Pulse duration 11-15 VDC 1.10 amps maximum 600 volts ± 3% 1.0 microfarad ± 10% 0.18 Joules (± 10%) 10 watts maximum +5 volt pulse into opto-isolator with 150 ohm nominal series resistor 10 to 100 microseconds Input connector Note 1: 9 pin “D” subminiature; mating connector providec Delay between flash command and light output is 8 microseconds typical Mechanical Specifications 1.49 2.00 (38) (51) 1.90 (48) 5.20 (132) BACK VIEW J19-PIN CONNECTOR 3.89 (99) 3.06 (78) 1.53 (39) 1/4-20 FOR MOUNTING BOTTOM VIEW DIMENSIONS ARE IN INCHES (MILLIMETERS) For more information e-mail us at [email protected] or visit our web site at www.perkinelmer.com/opto. All values are nominal; specifications subject to change without notice. USA: PerkinElmer Optoelectronics 35 Congress Street Salem, MA 01970 Toll Free: (800) 950-3441 (USA) Phone: (978) 745-3200 Fax: (978) 745-0894 © 2001 PerkinElmer inc. All rights reserved. Europe: PerkinElmer Optoelectronics Wenzel-Jaksch-Str. 31, D-65199 Weisbaden, Germany Phone: +49 (0) 611-492-437 Fax: +49 (0)611-492-159 Asia: PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12 Singapore 139947 Phone: +65 775 2022 Fax: +65 775 1008 0601 www.perkinelmer.com/opto .