PM8315 TEMUX High Density T1/E1 Framer with Integrated VT/TU Mapper and M13 Mux FEATURES • Monolithic device which integrates 28 T1 framers, 21 E1 framers, a SONET/ SDH VT1.5/V2/TU-11/TU-12 bit asynchronous mapper, a full featured M13 multiplexer with DS-3 framer, and a SONET/SDH DS-3 mapper for terminating DS-3 multiplexed T1 streams, SONET/SDH mapped T1 streams or SONET/SDH mapped E1 streams. • Seven T1 modes of operation: 1. Up to 28 T1 streams mapped as bit asynchronous VT1.5 virtual tributaries into a STS-1 SPE or TU-11 tributary units into a STM-1/VC3 or TUG3 from a STM-1/VC4. 2. Single STS-1, AU3 or TUG3 Bit Asynchronous VT1.5 or TU-11 Mapper with ingress or egress link monitoring per T1 tributary. 3. Up to 28 T1 streams M13 multiplexed into a serial DS-3. 4. Up to 28 T1 streams M13 multiplexed into a DS-3; the DS-3 is asynchronously mapped into a STS-1/STM-2/STM-0 SPE. 5. DS-3 M13 Multiplexer with ingress or egress link monitoring per T1 tributary. 6. Up to 28 DS-3 multiplexed T1 streams are mapped as bit asynchronous VT1.5 virtual trib- utaries or TU-11 tributary units, providing a transmultiplexing function between DS-3 and SONET/SDH. 7. Up to 21 T1 streams mapped as bit asynchronous VT2 virtual tributaries into a STS-1 SPE or TU-12 tributary units into a STM-1/VC3 or TUG3 from a STM-1/VC4. • Two E1 modes of operation: 1. Up to 21 E1 streams mapped as bit asynchrounous VT2 virtual tributaries into a STS-1 SPE or TU-12 tributary units into a STM-1/VC3 or TUG3 from a STM-1/VC4. 2. Single STS-1, AU3 or TUG3 Bit Asynchronous VT2 or TU-12 Mapper with ingress or egress per tributary link monitoring. • Supports a byte serial Scalable Bandwidth Interconnect (SBI™) bus interface for high density system side device interconnection of up to 84 T1 streams, 63 E1 streams, three DS-3 streams or three E3 streams. • Up to 28 VT1.5/TU-11 or 21 VT2/TU12 tributaries can be passed as transparent virtual tributaries (with pointer processing) between the SONET/SDH TelecomBus on the line side and the SBI bus on the system side. • Supports transfer of PCM data to/from 1.544 MHz and 2.048 MHz systemside devices. Also supports a fractional T1 or E1 system interface with independent ingress/egress Nx64 Kb/s rates. Supports a 2.048 MHz systemside interface for T1 mode without external clock gapping. • Supports 8 Mb/s MVIP on the system interface for all T1 or E1 links, a separate 8 Mb/s MVIP system interface for all T1 or E1 CAS channels and a separate 8 Mb/s MVIP system interface for all T1 or E1 CCS and V5.1/V5.2 channels. • Supports the M23 and C-bit parity DS-3 formats. • Supports stand-alone unchannelized DS-3 framer mode for access to the entire DS-3 payload. When configured to operate as a DS-3 Framer, gapped transmit and receive clocks can be optionally generated for interface to link layer devices which only need access to payload data bits. • Provides an on-board programmable binary pseudo-random sequence generator and detector for error testing at DS-3 rates and an on-board pseudo-random binary sequence generator and detector on each tributary for error testing at DS1, E1 or N*DS0 rates. BLOCK DIAGRAM Telecom Bus 19.44 MHz Mapper and Telecom Bus I/F M13 Multiplexer DS3 DS3 Framer with PRBS T1/E1 Framer PMON T1/E1 Transmitter 28xT1/21xE1 Clock and Data RJAT PRBS 28xT1/21xE1 On 7 H-MVIP buses TJAT Scaleable Bandwidth Interconnect Bus 19.44 MHz DS3 Clock and Data PMC-1971264 (R4) PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE 2001 PMC-Sierra, Inc. PM8315 TEMUX High Density T1/E1 Framer with Integrated VT/TU Mapper and M13 Mux • Supports IEEE P1149.1 JTAG test port. • Provides an 8-bit microprocessor bus interface for configuration, control, and status monitoring. • Low power +2.5/3.3 V CMOS technology. • Available in a high density 324-pin PBGA (23 mm by 23 mm) package. • -40 oC to +85 oC Industrial temperature operation. APPLICATIONS • Channelized and Unchannelized DS-3 Internet interfaces for Remote Access Concentrators, Routers and Switches. • Channelized and Unchannelized DS-3 Frame Relay Interfaces. • M13 Mux/Demux Equipment. • SONET-SDH Add/Drop and Terminal Multiplexers. • Integrated Services Platform. TYPICAL APPLICATIONS STRUCTURED CIRCUIT EMULATION APPLICATION Utopia L2/ Any-PHY SBI PM8315 TEMUX DS-3 LIU DS-3 PM73122 AAL1gator-32 MULTISERVICE APPLICATION PM5342 SPECTRA-155 OR PM8315 TEMUX PM8315 TEMUX DS3 LIU DS3 LIU 3xDS3 PM8315 TEMUX Head Office: PMC-Sierra, Inc. 8555 Baxter Place Burnaby, B.C. V5A 4V7 Canada Tel: 604.415.6000 Fax: 604.415.6200 To order documentation, send email to: [email protected] or contact the head office, Attn: Document Coordinator APPI SBI PM7384 FREEDM84A672 Utopia Packet/Cell Interworking Function Utopia TelecomBus PM73122 AAL1gator32 PM7324 S/UNIATLAS PM7326 S/UNIAPEX PM7341 S/UNI-IMA-84 All product documentation is available on our web site at: http://www.pmc-sierra.com For corporate information, send email to: [email protected] PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC. AND FOR IT’S CUSTOMERS’ INTERNAL USE PMC-1971264 (R4) © 2001 PMC-Sierra, Inc. All rights reserved. August 2001 S/UNI is a registered trademark and AAL1gator-II, Any-PHY, FREEDM-84A672, SBI, SPECTRA-155, and TEMUX are trademarks of PMC-Sierra, Inc.