P10 Vishay Sfernice 3/8" Square Potentiometers Cermet Fully Sealed FEATURES • Industrial Grade RoHS • 0.5 W at 70 °C COMPLIANT • Miniature compact • Plastic housing and shaft • Fully sealed P10 panel potentiometer combines the very good setting stability offered by VISHAY SFERNICE trimmers (due to their proprietary multifinger wiper), with a mechanical life of 10 000 cycles. It is an ideal choice to set and control parameters such as temperature, time, volume levels, etc. • 7 standard pin styles • 10 000 cycles rotational life DIMENSIONS in millimeters P10 side adjust P10 top adjust P10XX ø 0.5 3 2 1 5.2 5.3 1.15* 2.54* 9.7 5.5 AG = D = 16 AI = R = 20 5.3 ø 0.5 5.5 9.7 9.6 2.54* 2.54* ø3 ø3 4 min 4 min M 6 × 0.75 P10YP P10XH 1.15* 1 2 3 AG = D = 16 AI = R = 20 5.2 9.6 2.54* 2.54* 1 2.54* 2.54* 3 2.54* 2.54* 2.54* 2 P10YE P10XC 2.7* 3 2 1 2 1 2.54* 2.54* 2.54* 3 4.85 2.54* 2.54* 2.54* P10YM P10XW 2.7* 1 2 3 2.54* 1 2.54* 2.54* 3 5.08* 2.25* 2 * to be measured at base level CIRCUIT DIAGRAM a c (1) (3) b (2) cw Tolerance unless otherwise specified ± 0.5 www.vishay.com 108 For technical questions, contact: [email protected] Document Number: 51030 Revision: 02-Jul-07 P10 3/8" Square Potentiometers Cermet Fully Sealed Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element cermet Electrical Travel 250° ± 15° 100 Ω to 2 MΩ Resistance Range Standard series 1-2-5 Standard Tolerance ± 10 % On Request Power Rating ±5% Linear 0.5 W at + 70 °C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Table Limiting Element Voltage (Linear Law) 250 V 1 % Rn or 2 Ω Contact Resistance Variation End Resistance (Typical) 1Ω Dielectric Strength (RMS) 1000 V Insulation Resistance 106 MΩ MECHANICAL SPECIFICATIONS POWER RATING CHART 290° ± 5° 2 7 25 1 0.5 ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing POWER IN W Mechanical Travel Operating Torque (max. Ncm) End Stop Torque (max. Ncm) Tightening Torque (max. Ncm) Unit Weight (max. g) - 55 °C to + 125 °C 55/100/56 fully sealed container IP67 0 0 50 25 70 100 155 125 AMBIENT TEMPERATURE IN °C PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS Load Life Climatic Sequence Long Term Damp Heat Rapid Temperature Change Shock Vibration Rotational Life Document Number: 51030 Revision: 02-Jul-07 CONDITIONS 1000 hours at rated power 90’/30’ - ambient temperature 70 °C Phase A dry heat 100 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles 56 days 40 °C, 93 % RH ±1% ±2% Contact res. variation: < 1 % Rn ±1% ±2% ±1% ±2% Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ 5 cycles - 55 °C at + 125 °C ±1% 50 g at 11 m secs 3 successive shocks in 3 directions ± 0.5 % 10 - 55 Hz 0.75 mm or 10 g during 6 hours ± 0.5 % 10 000 cycles ΔR1-2 (%) R1-2 ΔRT (%) RT ΔV1-2 V1-3 ≤±2% ±1% ΔV1-2 V1-3 ≤±1% ±3% Contact res. variation: < 2 % Rn For technical questions, contact: [email protected] www.vishay.com 109 P10 3/8" Square Potentiometers Cermet Fully Sealed Vishay Sfernice MARKING STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES Printed: – VISHAY trademark – model – ohmic value – manufacturing date – pin 3 The ohmic value is indicated by a 3 figures code: the first two digits are significant figures, the third digit is the multiplier: Example: 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω The manufacturing date is indicated by a 4 figures code. The first two digits are the year, the last two digits are the week. LINEAR LAW TYPICAL TCR MAX. MAX. MAX. CUR. - 55 °C POWER WORKING THROUGH + 125 °C AT 70 °C VOLTAGE WIPER Ω W V mA 100 0.5 7.0 70 200 10.0 50 500 15.8 32 1K 22.4 22 2K 31.8 16 5K 50.0 10 10K 70.7 7.0 20K 100 5.0 50K 158 3.2 ppm/°C SHAFTS ± 150 100K 0.5 224 2.2 200K 0.28 250 1.3 500K 0.13 250 0.5 Standard shaft 20 mm length (R or AI code) and 16 mm length (D or AG code) is measured from the mounting face to the free end of the shaft. Vishay guarantee is lost if the customer modifies the shaft himself. 1M 0.06 250 0.25 HARDWARE 2M 0.028 250 0.13 Nuts and washer are supplied seperately (not mounted on the potentiometer) in a small bag placed in the packaging. PACKAGING – Carton boxes of 100 pieces ORDERING INFORMATION P10 MODEL XX VERSION R AXE 500 kΩ OHMIC VALUE ± 10 % TOLERANCE BO100 PACKAGING R = AI = 20 mm D = AG = 16 mm XX YP XH YE XC YM XW e3 LEAD FINISH e3: pure Sn SAP PART NUMBERING GUIDELINES P 1 MODEL 0 X X STYLE A I SHAFT 5 0 OHMIC VALUE 4 K TOL 3 B PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables www.vishay.com 110 For technical questions, contact: [email protected] Document Number: 51030 Revision: 02-Jul-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1