T11 Vishay Sfernice Square Modular Cermet Trimmers FEATURES • 0.5 W at 70 °C RoHS • Industrial grade COMPLIANT • Up to 5 modules • Switches and detents available • Available in conductive plastic • High rotational life up to 2000 cycles • X and Y styles DIMENSIONS in millimeters T11X 12.5 4.5 9 0.8 max 0.6 deep 1 12.5 Ø 12.5 14 1 x deep 1 9.5 7 ± 0.2 6 min 5.08 0.7 5.08 0.3 x 0.9 1.7 5.08 5.08 T11Y 12.7 5.08 5.08 CIRCUIT DIAGRAM a c (1) (3) b (2) www.vishay.com 54 cw Tolerances unless otherwise specified ± 0.5 mm For technical questions, contact: [email protected] See also: Application notes Document Number: 51021 Revision: 06-Jul-06 T11 Square Modular Cermet Trimmers Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard series E3 Tolerance cermet 270° ± 10° 22 Ω to 4.7 MΩ 1 - 2.2 - 4.7 and on request 1 - 2 - 5 ± 20 % ± 5 % or ± 10 % at 70 °C: 0.5 W at 70 °C: 0.25 W ± 100 ppm/°C 350 V 2 % Rn or 3 Ω (linear law) 2Ω ± 3 % (linear law) ±3% 106 MΩ (500 VDC) 1500 VRMS Standard On Request Power Rating Linear Logarithmic Laws, L, F, or S and ganged elements Temperature Coefficient (for Rn ≥ 100 Ω) Limiting Element Voltage Contact Resistance Variation End Resistance (Typical) Independant Linearity (Typical) Middle Keying Point (C V1M Typical) Insulation Resistance Dielectric Strength (RMS) MECHANICAL SPECIFICATIONS Mechanical Travel End Stop Torque (max. Ncm) Mechanical Life POWER RATING CHART 300° ± 5° 35 2000 cycles 90 % F ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing A Vs 50 % Ve % - 55 °C to + 125 °C 55/125/56 enables cleaning IP64 10 % S L α = β = 15° ± 5° β α 25 % 50 % 75 % Electrical travel 270° Mechanical Travel 300° Further information see P11/PA11 Document number 51031 PACKAGING - Carton box of 45 pieces, code BO45 for Y style (SAP code B24) and carton box of 80 pieces, code BO80 for X style (SAP code B28) ORDERING INFORMATION T11 SERIES X STYLE 470 kΩ OHMIC VALUE ± 20 % TOLERANCE A LAW BO80 PACKAGING Y Y Style: BO45 X X Style: BO80 e3 LEAD FINISH e3: pure Sn SAP PART NUMBERING GUIDELINES T 1 MODEL 1 X STYLE 4 7 OHMIC VALUE 4 M A TOL LAW B 2 PACKAGING CODE 8 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51021 Revision: 06-Jul-06 For technical questions, contact: [email protected] See also: Application notes www.vishay.com 55 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1