IMS 7 Series 7 Watt DC-DC Converters Wide input voltage ranges up to 75 V DC 1 or 2 outputs up to 48 V DC 1500 V DC I/O electric strength test voltage • Magnetic feedback for single output models • Short circuit protection • Industry standard 2" x 1" case with 10.5 mm profile Selection chart Output 1 Output 2 Input voltage Type Uo nom Io nom Uo nom Io nom Ui [V DC] [mA] [V DC] [mA] [V DC] 3.3 1200 14...36 24 IMS 7-03-9 3.3 1200 36...75 48 IMS 7-03-9 5.1 1200 14...36 24 IMS 7-05-9 5.1 1200 36...75 48 IMS 7-05-9 12 600 14…36 24 IMS 7-12-9C 12 600 36…75 48 IMS 7-12-9C 15 480 14…36 24 IMS 7-15-9C 15 480 36…75 48 IMS 7-15-9C 5 700 5 700 14...36 24 IMS 7-05-05-9 5 700 5 700 36...75 48 IMS 7-05-05-9 12 300 12 300 14...36 24 IMS 7-12-12-9 12 300 12 300 36...75 48 IMS 7-12-12-9 15 240 15 240 14...36 24 IMS 7-15-15-9 15 240 15 240 36...75 48 IMS 7-15-15-9 24 150 24 150 14...36 24 IMS 7-24-24-9 24 150 24 150 36...75 48 IMS 7-24-24-9 1 For minimum order quantities and lead times contact Power-One. 2 Option M, C, L and Z exclude each other. www.power-one.com Edition 3/04.2001 Options 1, 2 M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z 1 Board Mountable IMS 7 Series Input Input voltage range 24 IMS 7 48 IMS 7 14...36 V DC 36...75 V DC Output Output voltage setting accuracy Ui nom , 50% lo nom , single output models ±1% Uo nom Ui nom , 50% lo nom, double output, main/aux. output ±1.5 % Uo nom Minimum load recommended for double output models 10% lo nom Line/load regulation Ui min...Ui max, 50% lo nom , single output models ±1% Uo nom Line regulation Ui nom , 50% lo nom, double output models, main output ±1% Uo nom Load regulation Ui nom , 10...100% lo nom, double output models ±3% Uo nom tracking output ±3% Uo nom Output voltage switching noise Ui nom , 0...100% lo nom , peak-peak, total max. 1.5% Uo nom Efficiency Ui nom , lo nom up to 84% Control and protection Input protection Overload protection No-load protection Remote shut down Trim input for Uo suppressor diode Ui min...Ui max, any load fully protected, hiccup mode yes TTL-compatible inhibit input disabled with ≥2.4 V yes Safety and EMC Electric strength test voltage Electromagnetic interference I/O 1500 V DC class B Environmental Operating ambient temperature Storage temperature Relative humidity MTBF Ui nom, lo nom non operational non condensing GB 40°C, MIL-HDBK-217F, N2 –40...71°C –40...100°C 93% 1'650'000 h Options SMD version SMD version Open frame version C-pinout with pins with PCB lid M L Z C Accessories DIN and chassis mounting bracket www.power-one.com Edition 3/04.2001 2 IMS 7 Series 7 Watt DC-DC Converters Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. European Projection IMS 7 S09030 3.81(0.15") 4 5 x 3.81 (0.15") 1 4.6 (0.18") 14 20.3 (0.8") 3 x 5.08 (0.2") 3.81(0.15") 3.4 (0.13") 10 25.4 (1") 0.8 × 1.2 (0.03 x 0.05") Pins ∅ 1.6 (0.06) PCB holes 50.8 (2") PT 2.2 self tapping screws 3.81(0.15") 45.7 (1.8") Measuring point of case temperature TC S90002 1 14 4 23 (0.9") 48 (1.9") 5 x 3.81 (0.15") 3 x 5.08 (0.2") 1.27 (0.05") IMS 7 (option Z) 10 43.2 (1.7") 8.25 (0.32") 3.5 (0.14") 1.2 (0.5") IMS 7 (option C) 09032 50.8 (2") 35.5 (1.4") 0.5(0.02") Edition 3/04.2001 2 5 3.4 (0.13") 4 20.3 (0.8") 3 1 12.5 (0.49") 5.8 (0.2") ∅ 1(0.04") 25.4 (1") 15.2 (0.6") Measuring point of case temperature TC www.power-one.com ∅ 1 (0.04") Pins ∅ 1.2 (0.05") PCB holes 3 Board Mountable IMS 7 Series 50.8 (2") 14 1 10 4 25.4 (1") 0.8 × 1.2 (0.03 x 0.05") Pins 5 x 3.81 (0.15") 3.81(0.15") 3 x 5.08 (0.2") IMS 7 SMD version (option M) 42.4 (1.67") S09031 Measuring point of case temperature TC 4.2 (0.17") IMS 7 SMD version (option L) Foot print 1 Measuring point of case temperature TC Single output Vi+ Vi– i n.c. Vo– Vo+ Vo– R n.c. 10.5 (0.41") Dual output Vi+ Vi– i R (Trim) Vo1– Vo1+ Vo2– Vo2+ n.c. C pinout (option C) Pin 1 2 3 4 5 Single output Vi+ Vi– Vo+ no pin Vo– www.power-one.com Edition 3/04.2001 8 x 5 (1.9") 90001 Pin allocation IMS 7, option M and Z Pin 1 2 3 4 10 11 12 13 14 3.6 (1.4") 24 (0.94") 25.4 (1") 18 2.8 (0.11") 50.8 (2") Dual output Vi+ Vi– Vo+ Go Vo– SMD version (option L) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Single output Vo Go n.c. n.c. n.c. n.c. n.c. n.c. n.c. n.c. i no pin no pin n.c. n.c. n.c. Vi– Vi+ Dual output Vo1 Go Vo2 n.c. n.c. n.c. n.c. n.c. Trim n.c. i no pin no pin n.c. n.c. n.c. Vi– Vi+ 4