PG 12232-F OUTLINE DIMENSION & BLOCK DIAGRAM 67.2 57.2 52.41 0.1 H1 H2 122 x 32 A Dots 9.0 13.0 16.4 31.75 0.5 25.0 17.2 13.7 9.54 1.5 2- 1.0 K 1 10.26 2.5 7.8 35.9 7.3 9.7 20 9.4 20- 1.0 P2.54 x 19=48.26 69.2 0.5 1.0 1.5 1.8 2.0 4-R1.4 67.2 56.4 1 20 24.0 30.0 K A IC SIDE DB0~DB7 R/W Ao Vss Vdd Vo E1 RES E2 8.75 25.1 49.7 5.8 3.0 5.6 25.1 COM 16 LCD DRIVER 1 LCD PANEL COM 16 SEG 61 OCS1 OSC2 FR SEG 61 FR OSC2 0.38 0.05 Negative Voltage Vee A K 0.05 0.38 LCD DRIVER 2 Generator BACKLIGHT The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch 69.2 x 31.75 57.2 x 17.2 0.38 x 0.38 0.43 x 0.43 Module W /O B/L EL B/L LED B/L ABSOLUTE MAXIMUM RATING PIN ASSIGNMENT Pin no. Symbol 1 2 Vss Vdd Power supply(+) 3 Vo Contrast Adjust 4 Vee Ao L: Instruction / H: Data E1 E2 Enable driver 1 Enable driver 2 5 6 7 8 Function Power supply(GND) Poewr supply for LCD Data bit 0 Data bit 1 9 DB0 DB1 10 NC/Vdd NC or anode voltage 11 NC/Vss NC or cathode voltage 12-17 DB2-DB7 Data bit 2 ~ bit 7 18 NC/RW A 19 20 K NC or data read/write Power supply for LED B/L (+) Power supply for LED B/L ( ) H2 / H1 4.1 / 8.0 4.1 / 8.0 7.0 / 11.0 Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item Supply for logic voltage Min. -0.3 -0.3 -0.3 Units V 16.5 V Vdd+0.3 V Max. 8 ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units Power supply voltage Vdd-Vss 25oC 2.7 5.5 V Top N W N W N W V -20oC 6.5 6.9 V 6.1 LCD operation voltage LCM current consumption (No B/L) Backlight current consumption Vop Idd LED/edge LED/array 0oC V V 50oC 5.2 4.8 4.5 V 70oC 4.7 V 4.1 4.4 2.5 1 Vdd=5V mA VB/L=4.2V mA 180 VB/L=4.2V mA 25oC 5.0 5.3 5.6 4.8 4.6 5.0 5.0 5.3 5.4 LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request.