PG 24064-E/F OUTLINE DIMENSION & BLOCK DIAGRAM PG 24064-E 90.0 4-R1.75 2.0 H2 A (P2.54 x 9) 22.86 54.0 65.0 0.5 2 1 61.4 40.4 33.88 16.0 240 x 64 Dots 20 19 K 2.54 4.13 24.5 32.5 H1 13.0 161.4 134.0 127.16 9.3 20- 1.0 PAD 20- 1.8 1.8 4- 1.0 WR RD CE C D RESET DB0~DB7 FS Vdd Vo Vss FG Vee 1.6 176.0 180.0 0.5 PG 24064-F 90.0 LCD PANEL 64 80 8 8K RAM 8 2 19 20 COL 4 4 COL 4 CRYSTAL Negative Voltage Generator BACKLIGHT 0.49 0.04 0.04 0.49 (P2.54 x 9) 22.86 54.0 65.0 0.5 240 x 64 Dots K 80 80 COL 4 1 2 2.54 4.13 24.5 32.5 61.4 40.4 33.88 16.0 2.0 A COM 13 H1 H2 13.0 4-R1.75 3 A K 161.4 134.0 127.16 9.3 5 T6963C 20- 1.0 PAD 20- 1.8 1.8 4- 1.0 1.6 176.0 180.0 0.5 The tolerance unless classified 0.3mm MECHANICAL SPECIFICATION Overall Size View Area Dot Size Dot Pitch PIN ASSIGNMENT Pin no. 1 2 3 4 5 6 7 8 9 10 11-18 19 20 Symbol FG Vss Vdd Vo WR RD CE C/D Vee RST 180.0 x 65.0 134.0 x 40.4 0.49 x 0.49 0.53 x 0.53 Module W /O B/L EL B/L LED / CCFL B/L H2 / H1 4.5 / 8.6 4.5 / 8.6 9.2 / 13.3 ABSOLUTE MAXIMUM RATING Function Frame ground Power supply(GND) Power supply(+) Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Contrast Adjust Data write Data read Item Symbol Condition Min. Typical Max. Units Power supply voltage Vdd-Vss 4.5 5.5 25oC V Top N W N W N W V 14.3 14.7 15.1 -20oC V Chip enable Command / data select Negative output Reset DB0-DB7 Data bus line FS Font selection No connection NC Item Supply for logic voltage Min. -0.3 0 -0.3 Max. Units V 7.0 22.0 V Vdd+0.3 V ELECTRICAL CHARACTERISTICS LCD operation voltage Vop 0oC 8.9 13.2 9.4 13.6 9.9 50oC 8.6 9.6 70oC LCM current consumption (No B/L) Backlight current consumption Idd 10.7 10.2 9.7 25oC 9.1 12 Vdd=5V 12.4 10 LED/edge VB/L=3.5V 80 LED/array VB/L=4.2V 650 LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request. 14 12.8 V V V V mA mA mA