MDA200G RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION MDA210G SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * * Low cost Low leakage Low forward voltage Mounting position: Any Weight: 1.26 grams RS-1 MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .414 (10.5) .374 (9.5) .360 (9.1) .320 (8.1) AC .390 MIN. (9.9) .035 (0.9) DIA .028 (0.7) TYP. .160 (4.1) SPACING .140 (3.6) .650 (16.5) .610 (15.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .161 (4.1) .150 (3.8) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .050 (1.27) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS MDA200G MDA201G MDA202G MDA204G MDA206G MDA208G MDA210G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS VDC Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 50oC Peak Forward Surge Current 8.3 ms single half sine-wave 1000 Volts 560 700 Volts 800 1000 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 Volts IO 2.0 Amps I FSM 50 Amps TJ -55 to + 125 0 C T STG -55 to + 150 0 C superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 3.14A DC Maximum Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 o C MDA200G MDA201G MDA202G MDA204G MDA206G MDA208G MDA210G UNITS 1.1 Volts 10 uAmps 1 mAmps IR 2001-5 RATING AND CHARACTERISTIC CURVES ( MDA200G THRU MDA210G ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 2.0 60 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 0 0 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60Hz 1.5 1.0 Single Phase Half Wave 60Hz Inductive or Resistive Load .5 0 100 20 40 60 80 100 120 140 AMBIENT TEMPERATURE, ( ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD 20 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) CHARACTERISTICS 10 1.0 TJ = 25 Pulse Width = 300us 1% Duty Cycle .1 .01 .7 10 1.0 TJ = 25 0.1 .01 .8 .9 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON 140