RL201G RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RL207G GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * * High reliability Low leakage Low forward voltage drop High current capability Glass passivated junction DO-15 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.38 gram .034 (0.9) DIA. .028 (0.7) 1.0 (25.4) MIN. .300 (7.6) .230 (5.8) .140 (3.6) .104 (2.6) DIA. 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RL206G RL207G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range SYMBOL RL201G RL202G RL203G RL204G RL205G Volts IO 2.0 Amps I FSM 70 Amps CJ 20 R θJA T J , T STG 40 -65 to + 175 pF 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 oC Maximum Full Load Reverse Current Average, Full Cycle o .375” (9.5mm) lead length at TL = 75 C NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF IR RL201G RL202G RL203G RL204G RL205G 1.1 5.0 50 30 RL206G RL207G UNITS Volts uAmps uAmps 2001-6 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 2.0 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load .5 0 0 20 10 4 2 1.0 .4 .2 .1 TJ = 25 Pulse Width=300us 1% Duty Cycle .04 .02 .01 .6 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) SURGE CURRENT 100 8.3ms Single Half Sine-Wave (JEDED Method) 80 60 40 20 0 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 2.5 10 4 TJ = 100 1.0 .4 .1 .04 TJ = 25 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( RL201G THRU RL207G ) 200 100 60 40 20 10 6 4 TJ = 25 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) RECTRON