J05PT CHENMKO ENTERPRISE CO.,LTD THRU SILICON RECTIFIER VOLTAGE RANGE 50 - 1000 Volts J10PT CURRENT 1.5 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 0.034(0.9) DIA. 0.028(0.7) 1.0(25.4) MIN. MECHANICAL DATA Case: JEDEC DO-15 molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.38 gram 0.300(7.6) 0.230(5.8) 0.140(3.6) DIA. 0.104(2.6) 1.0(25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. DO-15 Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) SYMBOL J05PT J1PT J2PT J4PT J6PT J8PT J10PT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum Average Forward Rectified Current IO 1.5 Amps IFSM 60 Amps CJ 20 0.375" (9.5mm) lead length at TA = 75oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance ( Note ) Typical Thermal Resistance R Operating and Storage Temperature Range pF o 50 JA TJ, TSTG C/W o -65 to +175 C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.5 A DC Maximum Reverse Current at rated DC blocking Voltage per leg VF @ TA = 25oC @ TA = 100oC Maximum Full Load Reverse Current Average, Full Cycle 0.375" (9.5mm) lead length at TL = 75oC NOTES : Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts IR J05PT J1PT J2PT J4PT J6PT J8PT J10PT UNITS 1.0 Volts 5.0 uAmps 50 uAmps 30 uAmps 2001-6 RATING CHARACTERISTIC CURVES ( J05PT THRU J10PT ) 1.5 1.0 0.5 Single Half Wave 60HZ Resistive or Inductive Load 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( oC ) 200 PEAK FORWARD SURGE CURRENT, ( A ) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 70 60 8.3ms Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 0 1 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 5 10 20 NUMBER OF CYCLES AT 60 Hz 50 100 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, ( A ) 100 10 TJ =100oC 1.0 .1 10 Pulse Width = 300uS 1% Duty Cycle 3.0 1.0 0.3 TJ =25oC 0.1 .03 o TJ =25 C .01 .01 0 20 40 60 80 100 120 140 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) .2 .4 .6 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 60 40 20 10 TJ =25oC 6 4 2 1 .1 .2 .4 .8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE, ( V ) 200 JUNCTION CAPACITANCE, ( pF ) INSTANTANEOUS REVERSE CURRENT, (uA) 2 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) 40 100 1.4