RS601M RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RS607M SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * * * * * Low leakage Low forward voltage Mounting position: Any Surge overload rating: 250 amperes peak Silver-plated copper leads RS-6M MECHANICAL DATA .189 (4.8) .173 (4.4) .150 (3.8) 1.193 (30.3) 1.169 (29.7) .165 (4.2) .150 (3.8) .708 (18.0) .669 (17.0) .106 (2.7) f.134 (3.1) .122 (3.1) .197 (5) .134 (3.4) .800 (20.3) .697 (17.7) .441 (11.2) .425 (10.8) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .096 (2.3) .094 (2.4) .078 (2.0) .114 (2.9) .098 (2.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .043 (1.1) .031 (0.8) Ratings at 25 o C ambient temperature unless otherwise specified. .035 (0.9) .023 (0.6) Single phase, half wave, 60 Hz, resistive or inductive load. .402 (10.2) .386 (9.8) For capacitive load, derate current by 20%. .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS RS601M RS602M RS603M RS604M RS605M RS606M RS607M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage V RMS Maximum DC Blocking Voltage VDC o Maximum Average Forward Rectified Output Current at Tc = 100 C Peak Forward Surge Current 8.3 ms single half sine-wave 100 200 400 600 35 70 140 280 420 50 100 200 400 600 800 1000 Volts 560 700 Volts 800 1000 Volts IO 6.0 Amps I FSM 200 Amps T J, T STG -55 to + 150 superimposed on rated load Operating and Storage Temperature Range 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per element at 6.0A DC Maximum Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T C = 100 o C VF RS601M RS602M RS603M RS604M RS605M RS606M RS607M UNITS 1.0 Volts 10 uAmps 0.2 mAmps IR 2001-5 RATING AND CHARACTERISTIC CURVES ( RS601M - RS607M ) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 250 8.3ms Single Half Sine-Wave (JEDEC Method) 200 150 100 50 0 1 2 4 6 8 10 20 40 60 80100 AVERAGE FORWARD OUTPUT CURRENT, (A) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 8 7 6 5 4 3 Single Phase Half Wave 60Hz Indutive or Resistive Load 2 1 0 0 50 100 CASE TEMPERATURE, ( INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 TJ = 25 10 Pulse Width = 300us 1% Duty Cycle 1 .1 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz 150 ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 TJ = 100 1.0 .1 TJ = 25 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) RECTRON