W005LPT CHENMKO ENTERPRISE CO.,LTD THRU SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.5 Amperes W10LPT FEATURES * * * * High reverse voltage to 1000V Surge overload rating - 50 Amperes peak Good for printed circuit board assembly Silver-plated copper leads RC-2 .394(10.0) .374(9.50) .290(7.4) .270(6.9) MECHANICAL DATA 1.0 1.2 Case: JEDEC RC-2 molded plastic Mounting position: Any Polarity: Polarity symbols marked on body Weight: 1.37 grams (25.4) MIN. (30.5) MIN. .032(0.8) .028(0.7) .220(5.6) .180(4.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. .220(5.6) .180(4.6) RC-2 Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) W02LPT W04LPT W06LPT W08LPT W10LPT UNITS Maximum Recurrent Peak Reverse Voltage RATINGS SYMBOL VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts o Maximum Average Forward Rectified Current at TA = 50 C W005LPT W01LPT IO 1.5 Amps IFSM 50 Amps TJ -55 to +125 o C TSTG -55 to +150 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.5 A DC Maximum Reverse Current at rated VF @ TA = 25oC W005LPT W01LPT W02LPT W04LPT W06LPT W08LPT W10LPT UNITS 1.0 Volts 10 uAmps 0.2 mAmps IR DC blocking Voltage per element @ TA = 100oC 2004-6 RATING CHARACTERISTIC CURVES ( W005LPT THRU W10LPT ) 2.0 1.5 1.0 Single Half Wave 60HZ Resistive or Inductive Load 0.5 0 0 20 40 60 80 100 120 140 160 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 2.5 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 60 8.3 ms Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 0 0 2 AMBIENT TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 40 60 80 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 6 8 10 10 20 10 TJ = 25oC 1.0 4 NUMBER OF CYCLES AT 60HZ 0.1 PULSE WIDTH=300uS 1% DUTY CYCLE .01 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.6 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)