Under development New product LT0R45P/M Red Hologram Laser Compacat Size Hologram Laser for DVD (650nm-5m Single Mode) Outline Dimensions ø 8.2 7.5MAX. ø 6.63 Hologram glass Cap glass 4.8 3.97 1.0 0.25 ❏ 3.2 1.2 1.27 LD chip 4.3 (1) Maximum operating output: 5mW (2) Wavelength:635nm (3) Built-in high speed(MIN. 20MHz) OPIC* (4) Needless of external noise solution (5) With sensitivity switching function (6) Compact package(Thickness: 4.8mm) (7) High temperature operation: 70˚C (8) Single power supply•••LT0R45P Double power supply•••LT0R45M (Unit:mm) 4.6 Reference surface 0.3MAX. Features 10 - ø0.4 *1 Optical power output Threshold current Operating current Operating voltage Wavelength ø 8.2 P1.4+- 0.2 * 3 =4.2+- 0.2 (Tc=25˚C) Conditions Ratings MAX.4.5mW TYP. 55mA TYP.65mA Po=2.7mW TYP.2.2V *1 TYP.650nm Operating temperature Oscillation mode Deflection mode 1 2 4 3 5 10 9 8 2.8 4.8 Specifications Laser diode Parameter 6 7 4.9 [Terminal connection] -10 to +70°C Single mode TE mode Vcc - *1 Output power from hologram laser + VM (H/L) VA + Hologram laser Parameter H gain L gain FES output amplitude Radial error balance OPIC operating voltage OPIC response frequency RF output amplitude VB (Tc=25˚C) Conditions Ratings TYP.0.87Vp-p Output power3.0mW *2 TYP.0.34Vp-p RF amplitude at 0.27V TYP.0.54Vp-p MAX.±0.5µm MAX.4.5 to 5.5V MIN.20MHz Vcc=5V,-3dB + + D1 D2 D3 D4 D5 D6 VC VD VS GND LD Monitor PD(LT0R45P) Monitor PD(LT0R45M) *2 optical system is regulated by another paper. (Notice) In the absence of device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement. (Internet) Data for Sharp's optoelectronic/power devices is provided for internet.(Address http://www.sharp.co.jp/ecg/) As of Sep. 1996 Tec.L960907