S112S01 Series/S116S01 Series S112S01 Series S116S01 Series SIP Type SSR for Medium Power Control ■ Features ■ Outline Dimensions * The metal parts marked* are common to terminal 1 . ❈ Do not allow external connection. ( ) : Typical dimensions 1. Copiers, laser beam printers 2. Automatic vending machines 3. FA equipment 16.4 ± 0.3 12A125VAC φ 3.2 ± 0.2 16A125VAC 19.6 ± 0.2 (36.0) 16A250VAC A B 2 3 (5.08) (7.62) 4.2MAX. 1 4 0.6 ± 0.1 (2.54) Internal connection diagram S112S01/S116S01 S212S01/S216S01 For phase control No built-in zero-cross circuit Built-in zero-cross circuit 11.2MIN. + - S112S02/S116S02 S212S02/S216S02 Zero-cross circuit 1 2 3 4 Output ( Triac T2 ) Output ( Triac T1 ) Input ( + ) Input ( - ) 1 2 1 2 3 4 3 4 Output ( Triac T2 ) Output ( Triac T1 ) Input ( + ) Input ( - ) ■ Model line-ups For 100V lines S112S01 S116S01 S112S02 S116S02 5.5 ± 0.2 5.0 ± 0.3 * 12A250VAC 4 - 1.1 ± 0.2 4 - 1.25 ± 0.3 4 - 0.8 ± 0.2 1 2 3 4 ■ Applications B 3.2 ± 0.2 18.5 ± 0.2 A (Model No.) S112S01 S112S02 S116S01 S116S02 S212S01 S212S02 S216S01 S216S02 ❈ 0.2 MAX. 1. Compact, high radiation resin mold package 2. RMS ON-state current S112S01 Series: 12Arms at TC <= 70˚C ( With heat sink ) S116S01 Series: 16Arms at TC <= 60˚C ( With heat sink ) 3. Built-in zero-cross circuit ( S112S02 / S212S02 / S116S02 / S216S02 ) 4. High repetitive peak OFF-state voltage S112S01 / S112S02 / S116S01 / S116S02 VDRM : 400V S212S01 / S212S02 / S216S01 / S216S02 VDRM : 600V 5. Isolation voltage between input and output (Viso : 4 000Vrms ) 6. Recognized by UL, file No. E94758 S112S01 / S112S02 S116S01 / S116S02 7. Approved by CSA, No. 63705 S112S01 / S112S02 S116S01 / S116S02 ( Unit : mm ) For 200V lines S212S01 S216S01 S212S02 S216S02 “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” (1.4) S112S01 Series/S116S01 Series ■ Absolute Maximum Ratings Input Parameter Forward current Reverse voltage RMS ON-state current *1 Output ( Ta = 25˚C ) Peak one cycle surge current Symbol IF VR S112S01 Series S116S01 Series S112S01 Series S116S01 Series S112S01 S116S01 S212S01 S216S01 S112S01 S116S01 S212S01 S216S01 Repetitive peak OFF-state voltage Non-repetitive peak OFF-state voltage IT I surge / S112S02 / S116S02 / S212S02 / S216S02 / S112S02 / S116S02 / S212S02 / S216S02 VDRM VDSM Critical rate of rise of ON-state current Operating frequency *2 Isolation voltage Operating temperature Storage temperature *3 Soldering temperature dI/dt f Viso T opr T stg Tsol Rating 50 6 *4 12 *5 16 120 160 400 600 400 600 50 45 to 65 4 000 - 25 to + 100 - 30 to + 125 260 Unit mA V A rms A rms A A V V V V A/µ s Hz V rms ˚C ˚C ˚C *1 AC 60Hz sine wave, Tj = 25˚C start *2 AC 60Hz for 1 minute, 40 to 60 % RH. Apply voltages between input and output by the dielectric withstand voltage tester with zero-cross circuit. ( Input and output shall be shorted respectively ) . ( Note ) When the isolation voltage is necessary at using external heat sink, please use the insulation sheet. *3 For 10 seconds *4 TC<=70˚C *5 TC<=60˚C ■ Electrical Characteristics Input Output Transfer characteristics ( Ta = 25˚C ) Parameter Forward voltage Reverse current Repetitive peak OFF-state current S112S01 Series ON-state voltage S116S01 Series Holding current Critical rate of rise of OFF-state voltage Critical rate of rise of commutating OFF-state voltage S112S02 / S212S02 Zero-cross voltage S116S02 / S216S02 S112S01 / S212S01 Minimum trigger S116S01 / S216S01 S112S02 / S212S02 current S116S02 / S216S02 Isolation resistance Turn-on time S112S01 S116S01 S112S02 S116S02 Turn-off time Thermal resistance ( Between junction and case ) / S212S01 / S216S01 / S212S02 / S216S02 S112S01 series S116S01 series Thermal resistance ( Between junction and ambience ) *6 S112S01 Series: dI T /dt = - 6A/ms S116S01 Series: dI T /dt = - 8A/ms Symbol VF IR I DRM Conditions I F = 20mA V R = 3V V D = V DRM VT Resistance load I F = 20mA, IT = 12Arms Resistance load I F = 20mA, IT = 16Arms IH dV/dt V D = 2/3 • V DRM MIN. 30 TYP. 1.2 - MAX. 1.4 10- 4 10- 4 1.5 1.5 50 - Unit V A A V rms V rms mA V/µ s ( dV/dt ) C T j = 125˚C, VD = 400V, *6 5 - - V/µ s V OX I F = 8mA V D = 12V, R L = 30 Ω V D = 6V, R L = 30 Ω DC500V, RH = 40 to 60 % 1010 - 3.8 3.3 40 35 8 8 1 10 10 - V mA mA Ω ms ms ms ˚C/W ˚C/W ˚C/W I FT R ISO t on AC 50Hz t off AC 50Hz R th(j - c) R th(j - a) - S112S01 Series/S116S01 Series Fig. 2 RMS ON-state Current vs. Ambient ( S116S01Series) Temperature 18 12 (4) 10 (3) (2) RMS On-state current I T ( Arms ) RMS ON-state current I T ( Arms ) Fig. 1 RMS ON-state Current vs. Ambient ( S112S01Series) Temperature (1) 8 6 4 (5) 2 16 (3) (2) 14 (1) (4) 12 10 8 6 4 (5) 2 0 - 25 0 ( 1) ( 2) ( 3) ( 4) ( 5) 25 50 75 100 Ambient temperature T a ( ˚C ) 0 - 25 125 ( 1) ( 2) ( 3) ( 4) ( 5) With infinite heat sink With heat sink ( 280 x 280 x 2 mm Al plate ) With heat sink ( 200 x 200 x 2 mm Al plate ) With heat sink ( 100 x 100 x 2 mm Al plate ) Without heat sink 0 25 50 75 100 Ambient temperature T a ( ˚C ) 125 With infinite heat sink With heat sink ( 280 x 280 x 2 mm Al plate ) With heat sink ( 200 x 200 x 2 mm Al plate ) With heat sink ( 100 x 100 x 2 mm Al plate ) Without heat sink ( Note ) With the Al heat sink set up vertically,tighten the device at the center of the Al heat sink with a torque of 0.4N • m and apply thermal conductive silicone grease on the heat sink mounting plate. Forcible cooling shall not be carried out. Fig. 3 RMS ON-state Current vs. Case Temperature Fig. 4 Forward Current vs. Ambient Temperature 60 16 S116S01Series 50 12 Forward current I F ( mA ) RMS On-state current IT ( Arms ) 14 S112S01Series 10 8 6 4 30 20 10 2 0 - 25 40 0 25 50 75 100 Case temperature T c ( ˚C ) 125 0 - 25 0 25 50 75 100 Ambient temperature T a ( ˚C ) 125 S112S01 Series/S116S01 Series Fig. 5 Forward Current vs. Forward Voltage Fig. 6 Surge Current vs. Power-on Cycle 200 T a = 100˚C 160 75˚C 140 50˚C 20 Surge current I surge ( A) 50 Forward current IF ( mA ) f= 60H z T j = 25˚C Start 180 100 25˚C 0˚C 10 - 25˚C 5 120 S116S01Series 100 80 S112S01Series 60 40 2 1 20 0 1.0 Forward voltage V F ( V ) 0 2.0 Fig. 7 Maximum ON-state Power Dissipation vs. RMS ON-state Current (S112S01Series ) 20 1 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 RMS ON-state current I T ( Arms ) T a = 25˚C 18 16 14 12 10 8 6 4 2 0 16 0 2 4 6 8 10 12 14 RMS ON-state current I T ( Arms ) 10 - 4 10 ( ) = 6V S112S02,S212S02 (S116S02,S216S02 ) VD = 12V S112S01, S212S01 S116S01,S216S01 VD 8 RL = 30Ω 6 S112S01/S212S01 4 S116S01/S216S01 S112S02/S212S02 S116S02/S216S02 2 0 25 50 75 Ambient temperature T a ( ˚C ) 100 V D = 400V 10 - 5 Repetitive peak OFF-state current I DRM ( A) Minimum trigger current I FT ( mA ) 16 Fig.10 Repetitive Peak OFF-state Current vs. Ambient Temperature ( S112S01/ S112S02/S116S01/ S116S02) Fig. 9 Minimum Trigger Current vs. Ambient Temperature 0 - 25 100 20 Maximum ON-state power dissipation( W ) Maximum ON-state power dissipation ( W ) 16 50 Fig. 8 Maximum ON-state Power Dissipation vs. RMS ON-state Current ( S116S01Series ) T a = 25˚C 18 5 20 10 Power-on cycle ( Times ) 2 10 - 6 10 - 7 S112S02 S116S02 S112S01 S116S01 10 - 8 10 - 9 - 25 0 25 50 75 Ambient temperature T a ( ˚C ) 100 S112S01 Sreies/S116S01 Series Fig.11 Repetitive Peak OFF-state Current vs. Ambient Temperature ( S212S01/ S212S02/ S216S01/S216S02 ) 10 -4 Repetitive peak OFF-state current I DRM ( A) V D = 600V 10 -5 10 -6 S212S02 S216S02 S212S01 S216S01 10 -7 10 -8 10 -9 - 25 0 25 50 75 Ambient temperature T a ( ˚C ) 100 ● Please refer to the chapter “ Precautions for Use.”