DC/DC Converters TEL 2 Series, 2 Watt RoHS compliant Features ◆ Ultracompact DIL-16 Plastic Package ◆ Wide 2:1 Input Range ◆ Regulated Output ◆ I/O-Isolation 1500V ◆ Input Filter meets EN55022A without UL 60950 ext. Components ◆ Low Ripple and Noise ◆ Indefinite Shortcircuit Protection ◆ Operating Temperature Range -25°C to +75°C ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TEL-2 series, comprising 28 models, is a range of isolated 2 Watt converters in a low profile DIL-16 package. Requiring only 3.25 cm2 of space on the PCB they provide a complete DC/DC converter without need of any external components. Wide input range and tightly regulated output voltage qualifies these converters for many cost critical applications in industrial and consumer electronics. Models Ordercode TEL 2-0510 TEL 2-0511 TEL 2-0512 TEL 2-0513 TEL 2-0521 TEL 2-0522 TEL 2-0523 TEL 2-1210 TEL 2-1211 TEL 2-1212 TEL 2-1213 TEL 2-1221 TEL 2-1222 TEL 2-1223 TEL 2-2410 TEL 2-2411 TEL 2-2412 TEL 2-2413 TEL 2-2421 TEL 2-2422 TEL 2-2423 TEL 2-4810 TEL 2-4811 TEL 2-4812 TEL 2-4813 TEL 2-4821 TEL 2-4822 TEL 2-4823 http://www.tracopower.com Input voltage range 4.5 – 9 VDC 9 – 18 VDC 18 – 36 VDC 36 – 72 VDC Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output current max. 500 mA 400 mA 167 mA 134 mA ± 200 mA ± 83 mA ± 67 mA 500 mA 400 mA 167 mA 134 mA ± 200 mA ± 83 mA ± 67 mA 500 mA 400 mA 167 mA 134 mA ± 200 mA ± 83 mA ± 67 mA 500 mA 400 mA 167 mA 134 mA ± 200 mA ± 83 mA ± 67 mA Efficiency typ. 70 % 73 % 75 % 73 % 64 % 69 % 71 % 73 % 77 % 80 % 80 % 73 % 78 % 78 % 72 % 77 % 80 % 81 % 74 % 78 % 80 % 71 % 73 % 79 % 79 % 71 % 77 % 77 % Page 1 of 3 DC/DC Converters TEL 2 Series 2 Watt Input Specifications Input current at full load / full load (nominal input) 5 12 24 48 Start-up voltage / under voltage shut down 5 Vin models: 12 Vin models. 24 Vin models: 48 Vin models. 4 VDC / 3.5 VDC typ. 7 VDC / 6.5 VDC typ. 12 VDC / 11 VDC typ. 24 VDC / 22 VDC typ. 5 12 24 48 11 V max. 25 V max. 50 V max. 100 V max. under voltage shut down Surge voltage (100 msec. max.) Vin Vin Vin Vin Vin Vin Vin Vin models: models: models: models: models: models: models: models: 600 mA/ 40 mA typ. 220 mA/ 20 mA typ. 110 mA/ 10 mA typ. 55 mA/ 8 mA typ. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy Regulation ± 2 % max. – Input variation Vin min. to Vin max. ± 0.5 % max. – Load variation 25 – 100 % single output models: ± 0.75 % max. dual output models: ± 2.0% (balanced load) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Temperature coefficient ± 0.02 %/K Short circuit protection indefinite, automatic recovery Minimum load 25% of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Capacitive load 3.3 5 12 15 ±5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC output output output output output output output models: models: models: models: models: models: models: 2’200 µF max. 1’000 µF max. 170 µF max. 110 µF max. 470 µF max. 100 µF max. 47 µF max. General Specifications Temperature ranges – Operating – Storage Humidity (non condensing) – 25 °C ... + 75 °C (no derating) – 55 °C ... + 125 °C 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217 F) > 1.2 Mio h @ 25°C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 250 pF max. Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency 300 kHz (PFM) Safety standards UL/cUL 60950 , IEC 60950, EN 60950 Safety approval CSA 60950-1-03 (File no. 226037) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEL 2 Series 2 Watt Physical Specifications Case material non conductive FR4 Potting material Epoxy, UL94V-0 - rated Weight 5.1 g (0.17oz) Soldering temperature max. 260°C / 10 sec. Outline Dimensions mm (inches) 23.8 (0.94) 15.24 23.8 (0.6) 7.62 (0.3) 1.77 0.5 (0.02) 3.0 (0.12) 3.2 10 9 (0.13) Bottom view 16 13.7 (0.54) 10.16 (0.4) 7 8 Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 No con. No con. 8 No con. Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin +Vin (0.07) 1 Pin-Out 2.54 (0.1) (0.94) Pin diameter ø 0.5 ±0.05 (0.02) ±0.002 Tolerances ±0.25 (0.01) Specifications can be changed without notice Rev. 07/05 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43311 4511 · Fax +41 43311 4545 · [email protected] · www.tracopower.com Page 3 of 3