TRACOPOWER TSM1215S

DC/DC Converter
TSM Series
1 Watt
Features
SMD Package (SOIC-14/18)
Construction in Lead Frame Technology
Isolated Single and Dual Output
I/O-Isolation 1‘000 VDC
High Efficiency
Operating Temperature – 40°C to +85°C
Reflow Solder Temperature up to 230°C
High Accuracy of Pin Co-Planarity
Available in Tape and Reel Package
2 Year Product Warranty
The TSM series are isolated DC/DC converters with 1W output power
implemented in a molded plastic package with a pin accuracy suitable for high volume SMD-production. The devices do not require a
special reflow process but can be soldered like standard SMD-components. With their small footprint these converters are the economical solution for point of use power conversion, ground loop elimination, noise reduction and digital interface applications.
Models
Ordercode
TSM 0505S
TSM 0509S
TSM 0512S
TSM 0515S
TSM 0505D
TSM 0512D
TSM 0515D
TSM 1205S
TSM 1209S
TSM 1212S
TSM 1215S
TSM 1205D
TSM 1212D
TSM 1215D
www.tracopower.com
Input voltage
Output voltage
Output current max.
Efficiency typ.
5 VDC ±10%
5
9
12
15
± 5
±12
±15
VDC
VDC
VDC
VDC
VDC
VDC
VDC
200 mA
110 mA
80 mA
65 mA
±100 mA
± 40 mA
± 30 mA
80 %
78 %
80 %
81 %
75 %
79 %
79 %
12 VDC ±10%
5
9
12
15
± 5
±12
±15
VDC
VDC
VDC
VDC
VDC
VDC
VDC
200 mA
110 mA
80 mA
65 mA
±100 mA
± 40 mA
± 30 mA
81 %
78 %
81 %
82 %
75 %
80 %
80 %
Page 1
DC/DC Converter
TSM Series
1 Watt
Input Specifications
Input current no load /full load
5 Vin models
12 Vin models
30 mA / 260 mA typ.
15 mA / 110 mA typ.
Surge voltage (1 sec. max.)
5 Vin models
12 Vin models
9 V max.
18 V max.
Reverse voltage protection
0.3 A max.
Reflected input ripple current
can be reduced by ext. 1–2.2 µF polyester film
capacitor
Input filter
internal capacitors
Output Specifications
Voltage set accuracy
±3%
Voltage balance (dual output models)
± 1 % max.
Regulation
± 1.2 % / 1 % change Vin
± 10 % max.
– Input variation
– Load variation 20 – 100 %
Ripple and noise (20 MHz Bandwidth)
120 mVpk-pk max.
Temperature coefficient
± 0.02 % / °C
Short circuit protection
limited 1 sec. max.
Capacitive load
– Single output models
– Dual output models
22 µF max.
10 µF max.
General Specifications
Temperature ranges
– Operating
– Storage
(see also enclosed derating curve)
– 40 °C ... +85 °C (no derating)
– 55 °C ... +125 °C
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E)
>2’000’000 h @ 25 °C
Isolation voltage
Input/Output
1‘000 VDC
Isolation capacity
Input/Output
40 pF typ.
Isolation resistance
Input/Output
>1‘000 Mohm
Switching frequency
100 kHz typ. (Frequency modulation)
Frequency change over line and load
± 30 %
Physical Specifications
Case material
Package weight
Reflow soldering profile
Epoxy molding compound
(flammability to UL 94-V0)
– Single output models
– Dual output models
1.2 g (0.04 oz)
1.5 g (0.05 oz)
Peak temp. 230°C (10 sec max.)
185°C for 90 sec max. Convection reflow
solder process is recommended
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2
DC/DC Converter
TSM Series
1 Watt
Derating all TSM Models
+85˚C
+105˚C
90
90
80
80
70
70
60
60
50
50
-5.0% /˚C
40
40
30
30
20
20
10
10
Output Power [%]
100
Output Power [%]
100
0
0
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
Ambient Temperature [˚C]
Outline Dimensions mm (inches)
TSM Single Output Models
7.62 (0.3)
(0.01±0.002)
0.25 ± 0.05
+0
(0.264 – 0.256)
S
Seating
Plane
8 Pins
± 4˚
(0.01)
0
6.7 +– 0.15
8 Pins
0.1 S
0.25
(0.185)
4.7
2.0 (0.079)
6.5 (0.256)
7.0 (0.276)
0.2 M S
P
9.2 (0.362)
11.1 (0.437)
0.6 ±0.025
2.54 (0.1)
(0.024 ±0.001)
NA
8
1
7
14
NA +Vo
8
8.0 (0.315)
14
NA
2.5 (0.1)
1
7
–Vin +Vin NA –Vo
NA = not available for electrical connection
12.7 (0.5)
Tolerances: ± 0.25 mm (± 0.01)
Specifications can be changed without notice
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 3
DC/DC Converter
TSM Series
1 Watt
Outline Dimensions mm (inches)
TSM Dual Output Models
10.16 (0.4)
(0.01±0.002)
0.25 ± 0.05
+0
(0.264 –0.256)
(0.01)
6.7 +0
–0.15
8 Pins
0.1 S
0.25
(0.185)
4.7
2.0 (0.079)
6.5 (0.256)
S Seating
Plane
8 Pins
± 4˚
7.0 (0.276)
0.2 M S
P
9.2 (0.362)
11.1 (0.437)
0.6 ±0.025
2.54 (0.1)
(0.024 ±0.001)
10
1
9
NA
18
NA
NA +Vo
NA
10
8.0 (0.315)
18
2.5 (0.1)
15.24 (0.6)
1
9
–Vin +Vin NA Com –Vo
NA = not available for electrical connection
Tolerances: ± 0.25 mm (± 0.01)
Specifications can be changed without notice
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 4
DC/DC Converter
TSM Series
1 Watt
Solder Pad Dimensions mm (inches)
7.62
TSM Single Output Models
(0.3)
2.54
2.54
(0.1)
(0.1)
(0.1)
1.0 Min.
(0.067)
1.7
10.8
(0.425)
2.54
(0.039 Min.)
10.16 (0.4)
TSM Dual Output Models
2.54
2.54
2.54
(0.1)
(0.1)
(0.1)
(0.1)
1.0 Min.
(0.067)
1.7
10.8
(0.425)
2.54
(0.039 Min.)
Specifications can be changed without notice
Rev. 10/01
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com
Page 5