VJ0612 Vishay Vitramon Multilayer Ceramic Chip Capacitors Low Inductance FEATURES ∑ Low inductance, typically half the inductance of standard product. ∑ Reduces AC noise in multi-chip modules (MCM). ∑ Low profile, robust device for easy mounting. GENERAL SPECIFICATIONS NOTE: Electrical characteristics at + 25 °C unless otherwise specified. Capacitance Range: 8200 pF to 0.33 µF. Insulation Resistance (IR): At + 25 °C and rated voltage 100,000 MW minimum or 1000 WF, whichever is less. At + 125 °C and rated voltage 10,000 MW minimum or 100 WF, whichever is less. Inductance: 0.4 nH. Temperature Coefficient of Capacitance (TCC): ± 15 % from - 55 °C to + 125 °C. Dissipation Factor (DF): 25 V ratings, 3.5 % maximum at 1.0 Vrms and 1kHz. 50 V ratings, 2.5 % maximum at 1.0 Vrms and 1kHz. Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50mA £ 50V DC : DWV at 250 % of rated voltage. Aging Rate: 1 % maximum per decade. ORDERING INFORMATION VJ0612 Y 104 K X A A T CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING MARKING PACKAGING 0612 Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Example: 104 = 100 000 pF J=±5% K = ± 10 % M = ± 20 % X = Ni barrier 100% tin plated. J = 16 V A = Unmarked X = 25 V A = 50 V T = 7” reel / plastic tape C = 7” reel / paper tape R = 11 1/4” reel / plastic tape P = 11 1/4” reel / paper tape Note 1. DC voltage rating should not be exceeded in application Document Number 45010 Revision 10-Sep-04 For technical questions contact [email protected] www.vishay.com 39 VJ0612 Vishay Vitramon Multilayer Ceramic Chip Capacitors Low Inductance CAPACITANCE VS VOLTAGE VJ0612 CAPACITANCE CODE CAPACITANCE 822 8200 pF 103 0.010 µF 123 0.012 µF 153 0.015 µF 183 0.018 µF 223 0.022 µF 273 0.027 µF 333 0.033 µF 393 0.039 µF 473 0.047 µF 563 0.056 µF 683 0.068 µF 823 0.082 µF 104 0.10 µF 124 0.12 µF 154 0.15 µF 184 0.18 µF 224 0.22 µF 274 0.27 µF 334 0.33 µF www.vishay.com 40 VOLTAGE (Vdc) VOLTAGE (Vdc) VOLTAGE (Vdc) 16 25 50 For technical questions contact [email protected] Document Number 45010 Revision 10-Sep-04 VJ0612 Vishay Vitramon Multilayer Ceramic Chip Capacitors Low Inductance TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE 0.82 mF CAPACITOR COMPARISON TYPICAL INDUCTANCE VALUES* 1206 INDUCTANCE (nH) 0.9 1210 0.8 0907 0.7 0.6 0.5 0.4 0612 0.3 % CAPACITANCE CHANGE 1.0 10 1000 100 0 CAP -5 - 10 - 15 - 100 - 75 - 50 - 25 0.2 10 5 50 75 100 125 150 VJ0612Y823KXA IMPEDANCE AND ESR VJ0612 SERIES RESONANT FREQUENCY 100 IMPEDANCE/ESR (W) 1000 RESONANT FREQUENCY (MHz) 25 TEMPERATURE °C FREQUENCY (MHz) 100 10 10000 0 10 1 .1 0.1 CAPACITANCE (pF) 100000 .1 1 10 100 1000 FREQUENCY (MHz) Document Number 45010 Revision 10-Sep-04 For technical questions contact [email protected] www.vishay.com 41