SN54AS756, SN74AS756, SN74AS757 OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS SDAS040B – DECEMBER 1983 – REVISED JANUARY 1995 Open-Collector Outputs Drive Bus Lines or Buffer Memory Address Registers Eliminate the Need for 3-State Overlap Protection pnp Inputs Reduce dc Loading Open-Collector Versions of ′AS240A and ′AS241 Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs • • • • SN54AS756 . . . J PACKAGE SN74AS756, SN74AS757 . . . DW OR N PACKAGE (TOP VIEW) 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND description These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters by eliminating the need for 3-state overlap protection. The designer has a choice of selected combinations of inverting and noninverting outputs, symmetrical active-low output-enable (OE) inputs, and complementary OE and OE inputs. These devices feature high fan-out and improved fan-in. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 2OE / 2OE† 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 2Y4 1A1 1OE VCC SN54AS756 . . . FK PACKAGE (TOP VIEW) 1A2 2Y3 1A3 2Y2 1A4 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y1 2A4 1Y2 2A3 1Y3 2Y1 GND 2A1 1Y4 2A2 The SN54AS756 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74AS756 and SN74AS757 are characterized for operation from 0°C to 70°C. 2OE • † 2OE for ′AS756 or 2OE for SN74AS757 logic symbols‡ ′AS756 1OE 1A1 1A2 1A3 1A4 2OE 2A1 2A2 2A3 2A4 1 SN74AS757 EN 1OE 2 18 4 16 6 14 8 12 19 1Y1 1Y2 1A1 1A2 1Y3 1A3 1Y4 1A4 EN 2OE 11 9 13 7 15 5 17 3 2Y1 2Y2 2A1 2A2 2Y3 2A3 2Y4 2A4 1 EN 2 18 4 16 6 14 8 12 19 1Y1 1Y2 1Y3 1Y4 EN 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 ‡ These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Copyright 1995, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54AS756, SN74AS756, SN74AS757 OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS SDAS040B – DECEMBER 1983 – REVISED JANUARY 1995 logic diagrams (positive logic) ′AS756 1OE 1A1 1A2 1A3 1A4 2OE 2A1 2A2 2A3 2A4 SN74AS757 1 1OE 2 18 4 16 6 14 8 12 1Y1 1A1 1Y2 1A2 1Y3 1A3 1Y4 1A4 19 2OE 11 9 13 7 15 5 17 3 2Y1 2A1 2Y2 2A2 2Y3 2A3 2Y4 2A4 1 2 18 4 16 6 14 8 12 1Y1 1Y2 1Y3 1Y4 19 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Operating free-air temperature range, TA: SN54AS756 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74AS756, SN74AS757 . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54AS756, SN74AS756, SN74AS757 OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS SDAS040B – DECEMBER 1983 – REVISED JANUARY 1995 recommended operating conditions SN74AS756 SN74AS757 SN54AS756 UNIT MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 VCC VIH Supply voltage VIL VOH Low-level input voltage 0.7 0.8 High-level output voltage 5.5 5.5 V IOL TA Low-level output current 48 64 mA 70 °C High-level input voltage 2 Operating free-air temperature 2 – 55 125 V V 0 V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN74AS756 SN74AS757 SN54AS756 MIN TYP† MAX MIN TYP† UNIT MAX VIK IOH VCC = 4.5 V, VCC = 4.5 V, II = – 18 mA VOH = 5.5 V – 1.2 – 1.2 0.1 0.1 VOL VCC = 4 4.5 5V IOL = 48 mA IOL = 64 mA 0.55 II IIH VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V VCC = 5.5 V,, VI = 0.4 V IIL A inputs of SN74AS757 only 0.55 All other inputs ′AS756 VCC = 5 5.5 5V ICC SN74AS757 VCC = 5 5.5 5V V mA V 0.1 0.1 mA 20 20 µA –1 –1 – 0.5 – 0.5 Outputs high 9 15 9 15 Outputs low 51 80 51 80 Outputs high 21 33 21 33 Outputs low 61 95 61 95 mA mA † All typical values are at VCC = 5 V, TA = 25°C. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54AS756, SN74AS756, SN74AS757 OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS SDAS040B – DECEMBER 1983 – REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† SN54AS756 SN74AS756 TO (OUTPUT) tPLH tPHL A Y tPLH tPHL OE Y MIN MAX MIN MAX 3 20 3 19 1 7 1 6 3 22 3 19.5 1 8.5 1 7.5 UNIT ns ns † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† UNIT SN74AS757 tPLH tPHL A Y tPLH tPHL 1OE 1Y tPLH tPHL 2OE 2Y MIN MAX 3 18.5 1 6 3 20 1 7 3 21 1 7.5 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 ns ns ns SN54AS756, SN74AS756, SN74AS757 OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS SDAS040B – DECEMBER 1983 – REVISED JANUARY 1995 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.5 V Timing Input Test Point LOAD CIRCUIT FOR 3-STATE OUTPUTS 3.5 V High-Level Pulse 1.3 V R2 1.3 V 1.3 V 0.3 V 0.3 V Data Input tw th tsu 3.5 V 1.3 V 3.5 V Low-Level Pulse 1.3 V 0.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V Output Control (low-level enabling) 1.3 V 1.3 V 0.3 V tPZL Waveform 1 S1 Closed (see Note B) tPLZ [3.5 V 1.3 V tPHZ tPZH Waveform 2 S1 Open (see Note B) 1.3 V VOL 0.3 V VOH 1.3 V 0.3 V [0 V 3.5 V 1.3 V Input 1.3 V 0.3 V tPHL tPLH VOH In-Phase Output 1.3 V 1.3 V VOL tPLH tPHL VOH Out-of-Phase Output (see Note C) 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated