VER : A_2 update : 2012.02.01 LED Power PLF25 SERIES 25 Watts KEY FEATURES Fully Isolated Plastic Case with IP65 Level Constant Current Universal Input: 90-264 VAC With P.F.C. Function, PF>0.93 High Efficiency up to 86% Turn-on Delay < 250ms Protections: Over Load / Over Voltage / Short Circuit .Over Temperature(optional) High Reliability & Double Layered PCB Ultra Compact Size: 3.47 x 1.69 x 1.1 Inches 3-Years Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. Max output wattage (W) Voltage Input Output Protection Isolation Environment Physical Safety & EMC (Note1) PLF25-1400 PLF25-1050 PLF25-700 PLF25-350 25.2W 25.2W 25.2W 20.3W 90-264 VAC Frequency (Hz) 47~63 Hz Power factor PF>0.93 at full load (115/230 VAC) Current (full load) 0.6A max. (115 VAC) / 0.3A max. (230 VAC) Inrush current 40 A max. (Cold Start at 230 VAC) Leakage current <0.25mA Voltage (V.DC.) (max) 18V 24V 36V 58V Operation Voltage (Note2) 10.8~18VDC 14.4~24VDC 21.6~36VDC 37.7~58 VDC Current (mA) 1400 1050 700 350 Load Regulation (Min-Max) (typ.) ±4% 86% 86% 86% Ripple & Noise (max) (Note3) 4Vp-p Current Regulation (at 230VAC) (Note4) ±5% Efficiency (typ) (at 230VAC) 85% Over Temperature protection(optional) Auto recovery Over voltage protection Auto recovery Short circuit protection Auto recovery Input-Output (V.AC) 4000V Operating temperature -30°C…+60°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.1%°C Humidity 95% RH MTBF >906,500 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 3.47 x 1.69 x 1.1 Inches Weight 150 g ( 88.0 x 43.0 x 28.0 mm ) Tolerance ±0.5 mm Cooling method Free air convection Safety Standards EN61347、EN61347-2-13 EMI (Conducted & Radiated Emission) EN 55015 EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2 Class C (at input>25W)、EN 61000-3-3 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : A_2 update : 2012.02.01 LED Power PLF25 SERIES 25 Watts Note: 1. Please check the derating curve for more details. 2. This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific ststem design 3. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 4. (1) Current Regulation <±7.5% (at 115VAC Input Voltage) (2)Current Regulation <±10% (at other Input Voltage) MECHANICAL DIMENSION ( Top View ) DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# SINGLE 1 AC IN (N) 2 AC IN (L) 3 +DC OUT 4 -DC OUT -2-