Conns4 - Buccaneer 2010 - Power:Conns4 - Buccaneer 2005v8 8/6/10 16:33 Page 35 BUCCANEER FOR POWER IP68 Mini Buccaneer® Rear Nut Panel Mounting Body Insert Retaining Tab O Ring Main Body Gland Sealing Washer Contact Carrier Insert Locking Ring Gland Cage Sealing Cap Gland Nut Retaining Clip ᔢ Water and dustproof to IP68 when mated ᔢ IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks ᔢ 2, 3, 4 or 6 pole screw terminal inserts ᔢ 3 or 8 pole solder or crimp inserts ᔢ 5 body styles, Flex, Flex In-Line, Panel (2 styles), Panel Side Entry ᔢ 50Ω or 75Ω BNC inserts ᔢ 5A, 380V a.c. 3 & 8 way solder/crimp terminals ᔢ 10A, 250V a.c. 2 & 3 way screw terminals ᔢ 6A, 250V a.c. 4 way screw terminal ᔢ 3A, 250V a.c. 6 way screw terminal www.elektron-bulgin.com ᔢ ᔢ ᔢ ᔢ ᔢ ᔢ ᔢ ᔢ ᔢ ᔢ Plug or socket connection in each body style Cable range from 3.5mm - 9mm Diameter over coupling ring 26mm Positive locating keyways - cannot be mis-mated Sealing caps available to maintain IP68 rating of unmated connectors Flammability rating UL94V-0 material Leading earth contact on all types (except 2 pole) Compact design Easy assembly - no special tools required on screw terminal versions UL approval 35 BUCCANEER POWER O Rings Contact Carrier Insert Conns4 - Buccaneer 2010 - Power:Conns4 - Buccaneer 2005v8 8/6/10 16:33 Page 36 BUCCANEER FOR POWER Mini Buccaneer® FLEX CABLE CONNECTOR BUCCANEER POWER PX0800 - shown with insert ᔢ PX0800 Connector body ᔢ Mates with Flex In-line or Panel Mounting versions ᔢ Screw locking ring ᔢ Suitable for Pin or Socket inserts ᔢ Cable Acceptance 3.5-9mm (Standard 5-7mm) ᔢ Contact inserts supplied separately IN-LINE FLEX CABLE CONNECTOR ᔢ PX0801 Connector body ᔢ Mates with PX0800 - Flex Cable connector ᔢ Suitable for Pin or Socket inserts ᔢ Cable Acceptance 3.5-9mm (Standard 5-7mm) ᔢ Contact inserts supplied separately PX0801 - shown with insert PANEL MOUNTING ᔢ PX0802 Connector body ᔢ Mates with PX0800 - Flex Cable connector ᔢ Single hole fixing ᔢ Suitable for Pin or Socket inserts ᔢ Contact inserts supplied separately PX0802 - shown with insert PANEL MOUNTING ᔢ PX0803 Connector body ᔢ Mates with PX0800 - Flex Cable connector ᔢ Right angle cable entry ᔢ Single hole fixing ᔢ Suitable for Pin or Socket inserts ᔢ Contact inserts supplied separately PX0803 - shown with insert PANEL MOUNTING PX0805 - shown with insert 36 ᔢ PX0804 and PX0805 Connector bodies ᔢ Mates with PX0800 - Flex Cable connector ᔢ PX0804 without sealing cap retaining clip, PX0805 with sealing cap retaining clip ᔢ Single hole fixing ᔢ Suitable for Pin or Socket inserts ᔢ Contact inserts supplied separately www.elektron-bulgin.com Conns4 - Buccaneer 2010 - Power:Conns4 - Buccaneer 2005v8 8/6/10 16:33 Page 37 BUCCANEER FOR POWER Mini Buccaneer® ᔢ 2, 3, 4 and 6 Poles ᔢ Fits all Body Styles ᔢ Leading Earth Pin on 3, 4 and 6 pole inserts ᔢ Nickel Plated contacts CONTACT CARRIER INSERTS ᔢ ᔢ ᔢ ᔢ For Solder or Crimp Contacts 3 or 8 Pin Fits all Body Styles Contacts Supplied Separately Inserts shown with contacts fitted CONTACTS, POLARISING/BLANKING PINS ᔢ Gold Plated contacts ᔢ Solder or Crimp ᔢ Polarising/Blanking pins Socket Pin 2 SA3319 SA3320 3 SA3229 SA3230 4 SA3242 SA3241 6 SA3244 SA3243 Solder & Crimp Contact Carrier Inserts - fit all body styles. No. Poles Solder Colour Crimp Colour 8 pin 12734/1 Black 12734 Grey 8 socket 12735/1 Black 12735 Grey 3 pin 12734/3/1 Black 12734/3 Grey 3 socket 12735/3/1 Black 12735/3 Grey Contacts - Solder & Crimp - for contact carrier inserts Contacts (Supplied in packs of 10) Solder Crimp Pins SA3148/1 SA3148 Sockets SA3149/1 SA3149 Polarising/Blanking Pins SA3147 Contact Insertion Tool: Must be used to load contacts into inserts. SA3150 Crimping Tool SA2800 BNC Inserts - fit all body styles except PX0803 BNC INSERT KIT ᔢ BNC inserts for 50Ω and 75Ω co-ax cables ᔢ Includes gland and washer to suit coax cable ᔢ Fits all Body Styles (except PX0803) Inserts Shown assembled No. Poles Imp. Cable Type Contacts Part No. 50Ω RG58/CU, URM43, URM76 Plug SA3159/1 50Ω RG58/CU, URM43, URM76 Socket SA3157/1 75Ω URM70 Plug SA3159 75Ω URM70 Socket SA3157 SEALING CAPS To maintain IP rating www.elektron-bulgin.com PX0810 Fits PX0801, PX0802, PX0803, PX0804 & PX0805. Ensure “O” Ring is in place on main body. PX0811 Fits PX0800. Ensure “O” Ring is in place in cap. 37 BUCCANEER POWER Screw Terminal Inserts - fit all body styles SCREW TERMINAL INSERTS Conns4 - Buccaneer 2010 - Power:Conns4 - Buccaneer 2005v8 8/6/10 16:34 Page 38 BUCCANEER FOR POWER Mini Buccaneer® Contact Inserts and Accessories SPECIFICATION Electrical Solder/Crimp Terminals Screw Terminals BNC No Poles: 3, 8 2, 3 4 6 Current Rating: 5A 10A 6A 3A Voltage Rating: 380V ac 250V ac 250V ac 250V ac Contact Resistance: <5mΩ Insulation Resistance: >106MΩ @ 500V d.c. Voltage Proof: 2kV @ 50Hz Operating Temp. Range: –20°C to +70°C BUCCANEER POWER Approvals: E214972 Materials Solder/Crimp Terminals Screw Terminals BNC Body Mouldings: Polyamide UL94V-0 Polyamide UL94V-0 Inserts: Polyamide UL94V-0 Polyamide UL94V-0 Contacts: Copper Alloy, Gold Plated (0.1µm) on Nickel Brass, Nickel Plated Brass, Silver Plated. O Rings: Nitrile Compliant Compliant Compliant Mechanical Solder/Crimp Terminals Screw Terminals BNC Sealing: Protection Classification IP68, BS EN60529:1992. Tested @ 1.054kg/sq.cm. (15lb/sq.in.) 10m depth for 2 weeks. Cable Acceptance 5-7mm dia - standard gland 3.5-9mm dia - alternative glands Contact Accommodation: 0.2 - 0.5mm2 (20 - 24 AWG) 1mm2 max (18 AWG) Insertion Force (typical): 3 way: 8 way: 5N (1.1lbf) 14N (3.1lbf) 3 way: 45N (10lbf) 4 way: 50N (11lbf) 6 way: 140N (31lbf) Withdrawal Force (typical): 3 way: 8 way: 3N (0.66lbf) 12N (2.6lbf) 3 way: 32N (7lbf) 4 way: 40N (9lbf) 6 way: 150N (34lbf) Tightening Torques Gland Nut, PX0800, 801: Rear Nut, PX0802, 803, 804, 805: Sealing Cap, PX0810, 811: 50Ω: RG58/CU, URM43, URM76 75Ω: URM70 1.13Nm (10lbf in) 0.7Nm min, 1.7Nm max (6.2lbf in min, 15lbf in max) 0.23Nm min, 1.13Nm max (2lbf in min, 10lbf in max) HOW TO ORDER ᔢ Choose body type, check cable diameter and sealing gland size. ᔢ Determine contact carrier inserts. Choose number of poles, and type of CABLE GLANDS Cable gland for 5-7mm fitted as standard. BNC Insert Kit includes gland & washer to fit coax cable. contacts (solder, crimp, screw terminal or BNC). ᔢ Choose pins or sockets. Solder and crimp contacts are supplied ᔢ ᔢ ᔢ ᔢ separately in packs of ten. Choose polarising/blanking pins. If required for solder/crimp contact inserts. Supplied in packs of ten. Is an insertion tool required (for solder or crimp contacts)? Is a crimp tool required? Is a sealing cap required? Cable Diameter Gland Part No. Gland Colour Additional Suffix Fitted as standard 5-7mm 12023/1 White 3.5-5mm SA3426 Grey Suffix /04 † 6-8mm 12023 Black Suffix /06 7-9mm 12023/2 Yellow Suffix /07 Gland Pack PX0812 Pack of 3 glands to suit cables 3.5-5mm, 6-8mm, 7-9mm dia † To order body with alternative cable gland add suffix to part no. e.g. PX0800/06 = PX0800 body with cable gland to suit 6-8mm dia. cable. † Includes additional black gland cage for 3.5-5mm dia. cable range. 38 www.elektron-bulgin.com