B u c c a n e e r® S t a n d a r d S e a l e d C o n n e c t o r s Gland Cage Seal Inner Unit Retaining Rings Seal C O N N E C T O R S Plug or Socket Inner Unit Gland Nut Flex Member Body Moulding Plug to Socket Retaining Cover Snap-on Connection for Flexible Straps & Covers Castellated/Hex Nut Data Ratings: 2 & 3 Pole 4 Pole 6 & 7 Pole 9 Pole 25 Pole Contact Resistance: <10mΩ (2-9 pole) <5mΩ (25 pole) Insulation Resistance: >104 MΩ @ 500V d.c. (2 - 9 Pole) A.C. Breakdown Voltage: 4kV Pole - Pole 6kV Poles - Panel 7.5kV Poles - Panel (2 - 9 Pole) (Low Profile Flange & Chassis Types 2 - 9 Pole) (Other Types 2 - 9 Pole) Operating Temp. Range: –20°C to +70°C Sealing: IP68, BS 5490 : 1977 BS 60529 : 1992 Tested@15lb/sq. in. (10m depth) for 2 Wks. Tested@150lb/sq. in. (100m depth) for 12 Hrs. Glass Filled Nylon, UL94HB Nylon, UL94V-0 Brass, Nickel Plated Copper Alloy, Tin Plated Copper Alloy, Gold Plated 0.1µm on Nickel (2 - 9 Pole) (25 Pole Inserts) (2 - 7 Pole) (9 Pole) (25 Pole) Materials: Body Moulding & Inserts: Contacts: BNC Inserts: BNC Contacts: 10A 250V a.c./d.c. 6A 250V a.c./d.c. 3A 250V a.c./d.c. 5A 150V a.c./d.c. 1A 50V a.c./d.c. Brass, Nickel Plated Brass, Silver Plated Cable Acceptance: 6 - 8mm Overall dia. 3.5 - 5mm Overall dia. 5 - 7 mm Overall dia. 7 - 9mm Overall dia. 50Ω - RG 58/CU, URM43, & URM76 75Ω - URM70 Standard 2 - 9 Pole, Optional 25 Pole Optional 2 - 9 Pole, Optional 25 Pole Optional 2 - 9 Pole, Optional 25 Pole Optional 2 - 9 Pole, Standard 25 Pole BNC BNC Terminations: Screw Terminal. Crimp Contacts (24 - 28AWG). Crimp and Solder Contacts (0.21mm2 - 0.081mm2) Crimp. 2 - 7 pole. 9 pole. 25 pole. BNC. Approvals: Reg.-Nr. 1549 Tightening Torques Flex mounting/In-Line: Gland nut: 1.13Nm (10lbf. in.) Panel/Chassis Mounting: Rear fixing nut: 1.7Nm (15lbf. in.) Surface/Bulkhead and Low Profile 4 fixing screws (using washers supplied) 0.34Nm (3lbf. in) Flange Mounting: Sealing Caps/Locking Ring: 1.13Nm (10lbf. in) 14 Fax: 0181 507 2691 email: [email protected] B u c c a n e e r® S t a n d a r d S e a l e d C o n n e c t o r s Poles Flex Mounting 2 3 4 6 7 9* 25† 50ΩBNC** 75ΩBNC** Poles Chassis Mounting 2 3 4 6 7 9* 25† 50ΩBNC** 75ΩBNC** Poles Bulkhead/ Surface Mounting 2 3 4 6 7 9* 25† 50ΩBNC** 75ΩBNC** Poles Low Profile Flange Mounting 2 3 4 6 7 9* 25† 50ΩBNC** 75ΩBNC** PX0736/S PX0731/S PX0748/S PX0739/S PX0745/S PX0728/S PX0820/S List No. Plug List No. Socket PX0737/P PX0732/P PX0749/P PX0740/P PX0746/P PX0729/P PX0821/P PX0737/S PX0732/S PX0749/S PX0740/S PX0746/S PX0729/S PX0821/S PX0743/S/50Ω PX0743/S/75Ω List No. Plug List No. Socket PX0735/P PX0730/P PX0747/P PX0738/P PX0744/P PX0727/P PX0822/P PX0735/S PX0730/S PX0747/S PX0738/S PX0744/S PX0727/S PX0822/S PX0741/S/50Ω PX0741/S/75Ω List No. Plug List No. Socket PX0757/P PX0756/P PX0761/P PX0758/P PX0760/P PX0762/P PX0823/P PX0757/S PX0756/S PX0761/S PX0758/S PX0760/S PX0762/S PX0823/S PX0759/S/50Ω PX0759/S/75Ω List No. Plug List No. Socket PX0764/P PX0765/P PX0766/P PX0767/P PX0768/P PX0769/P PX0824/P PX0764/S PX0765/S PX0766/S PX0767/S PX0768/S PX0769/S PX0824/S PX0763/S/50Ω PX0763/S/75Ω * Crimp Pins and Sockets supplied loose with Connector. ** For suitable Crimp Tool and Assembly Mandrel contact Sales Office. www.bulgin.co.uk List No. Socket 2 PX0736/P 3 PX0731/P 4 PX0748/P 6 PX0739/P 7 PX0745/P 9* PX0728/P 25† PX0820/P 50ΩBNC** PX0742/P/50Ω 75ΩBNC** PX0742/P/75Ω Poles Flex Mounting In-Line Connector List No. Plug C O N N E C T O R S † Pins supplied in packs of 10: Crimp Pins SA3180, Crimp Sockets SA3179, Solder Pins SA3180/1, Solder Sockets SA3179/1. Insertion and Extraction Tool - use PNo13027. Crimp Tool - use PNo13170. Tel: 0181 594 5588 15 B u c c a n e e r® S t a n d a r d S e a l e d C o n n e c t o r s C O N N E C T O R S 25 way inserts (Assembled) BNC Inserts Cap Assembly Tools PX0733 Fits all other types. PX0734 Fits Flex Mounting types. 12237 provides additional cable support. Suitable for 5-7mm and 7-9mm cables. PNo. 12237 Cable Support Accessory 12855 for chassis mounting types only. Boot PNo. 12855 Cable Acceptance (2 - 25 pole) PNo 13027 Insertion and Extraction Tool for 25 way only List Nos. To Order Glands Separately As fitted (2 - 9 Pole) Ø 6-8mm 12023 (Black) List No./04 Ø 3.5-5mm 12023/5 (Grey) List No./05 Ø 5-7mm 12023/1 (White) List No./07 Ø 7-9mm (As fitted 25 Pole) 12023/2 (Yellow) e.g. PX0731/P/07 = cable acceptance Ø 7-9mm A Catalogue of the Buccaneer® Range of Sealed Products is also available on request. 16 Fax: 0181 507 2691 email: [email protected] B u c c a n e e r® S e a l e d I n - L i n e C a b l e J o i n e r C O N N E C T O R S PX0777 Data Rating: 6A, 250V a.c. Wire Termination: 3 way terminal block. Cable Acceptance: 6-8mm Overall Diameter Standard. 3.5 - 5mm, 5 - 7mm & 7 - 9mm Overall diameter optional. Sealing: IP68 to BS60529 : 1977 Operating Temp. Range: -20°C to +70°C. Colour: Black Orange (Add /OR to List No.) BNC Cable Types: Cable Acceptance List Nos. To Order Glands Separately As Fitted ø 6-8mm 12023 (Black) List No. /04 Ø 3.5 - 5 mm 12023/5 (Grey) List No. /05 Ø 5 - 7 mm 12023/1 (White) List No. /07 Ø 7 - 9 mm 12023/2 (Yellow) E.g. PX0777/07 = Cable Acceptance Ø 7-9mm 50 ohm - RG58/CU, URM43 & URM76, For BNC version of PX0777 add /50 ohm to List No. www.bulgin.co.uk Tel: 0181 594 5588 17 B u c c a n e e r® M i n i S e a l e d C o n n e c t o r s Chasis/Panel Mounting Body (Style 2) Rear Nut Locking Tab C O N N E C T O R S Socket Pin Carrier (Solder/Crimp) ‘O’ Ring Sealing Washer Main Body Gland Cage & Gland ‘O’ Rings Socket Pin Carrier (Solder/Crimp) Locking Ring Gland Nut Data Rating: Solder & Crimp Contacts : 5A. 380V a.c. Contact Resistance: < 5mΩ. Insulation Resistance: >106M Ω @ 500V d.c. Voltage Proof: 2kV @ 50Hz Operating Temp. Range: –20°C to +70°C Sealing: IP 68 Materials Body Mouldings, Carriers, Nylon UL94V-0. Contacts: Copper Alloy, Gold Plated (0.1µm) on Nickel. B.N.C. types: Brass, Silver Plated. Cable Acceptance Screw Term: 10A. 250V a.c. BS EN60529 : 1992 (Protection Classification). Screw Termnal Contacts: Brass, Nickel Plated. 5 - 7mm Overall dia Standard 3.5 - 5mm Overall dia Optional 6 - 8 mm Overall dia Optional 7 - 9mm Overall dia Optional Solder & Crimp: 0.2 - 0.5mm2 (20 - 24 AWG), 50Ω - RG58/CU BNC URM43 BNC URM76 BNC 75Ω - URM70 BNC Screw Termnal: 1mm2 Max (18 AWG) Insertion Force (typical): Solder and crimp contacts: 3 Way - 0.5kgf (1.1lbf) 8 Way - 1.4kgf (3.1lbf) Screw Terminals: 10lbf (44.4N) Withdrawal Force (typical): Solder and crimp contacts: 3 Way - 0.5kgf (1.1lbf) 8 Way - 1.2kgf (2.6lbf) Screw Terminals: 7lbf (31N) Conductors: Tightening Torques 18 Flex mounting/In-Line: Gland nut: 0.23Nm min. 0.45Nm max. (2lbf. in. min, 4lbf. in. max.) Panel/Chassis/Side Entry: Rear nuts: 0.7Nm min. 1.7Nm max. (6.2lbf. in. min, 15lbf. in. max.) Sealing Caps/Locking Ring: 0.23Nm min, 1.13Nm max. (2lbf. in. min, 10lbf. in. max.) Fax: 0181 507 2691 email: [email protected] B u c c a n e e r® M i n i S e a l e d C o n n e c t o r s PX0800 Contact Carriers See Page 20 Contacts See Page 20 Sealing Glands For 5-7mm. dia. Cable. For other sizes see page 20. Flex Mounting Body PX0801 Contact Carriers See Page 20 Contacts See Page 20 Sealing Glands For 5-7mm. dia. Cable. For other sizes see Page 20. Flex Mounting In-Line Body PX0802 Contact Carriers See Page 20 Contacts See Page 20 C O N N E C T O R S Panel/Chassis Mounting Body PX0804, PX0805 Contact Carriers See Page 20 Contacts See Page 20 PX0804 without cap retainer PX0804 without cap retainer Panel/Chassis Mounting Body PX0803 Contact Carriers See Page 20 Contacts See Page 20 Note: Not available as BNC Type Panel/Chassis Mounting Side Entry Body www.bulgin.co.uk Tel: 0181 594 5588 19 B u c c a n e e r® M i n i S e a l e d C o n n e c t o r s Screw Terminal (10A) Ways Socket Plug 3 way SA 3229 SA3230 How To Order 1) Body Type. C O N N E C T O R S 2) Contact Carrier (Pin or Socket Solder or Crimp), Contact Carrier 3 Way or BNC. Screw Terminals 3) Pins or Sockets (Solder or Crimp). Supplied in packs of ten. Contact Carriers Carriers shown fitted with contacts 4) Sealing Cap (if required) Pole Solder Crimp 8 pin 12734/1 (Black) 12734 (Grey) 8 skt 12735/1 (Black) 12735 (Grey) 3 pin 12734/3/1 (Black) 12734/3 (Grey) 3 skt 12735/3/1 (Black) 12735/3 (Grey) 5) Polarising/Blanking Pins (if required). Supplied in packs of ten. 6) Contact Insertion Tool (if required). 7) Crimping Tool (if required). Contacts, Solder & Crimp Contacts Solder Crimp Pins SA3148/1 SA3148 Sockets SA3149/1 SA3149 Polarising/Blanking Pins SA3147 Contacts, Polarising/Blanking Pins Contact Insertion Tool SA 3150 must be used to insert contacts into carrier. Crimping Tool SA2800 Polarizing/Blanking Pins SA3147 BNC BNC (Assembled) Sealing Caps 20 Imp. Contacts List No. 50Ω Plug SA3159/1 50Ω Socket SA3157/1 75Ω Plug SA3159 75Ω Socket SA3157 PX0810 Fits PX0801, PX0802, PX0803, PX0804 & PX0805. Ensure “O” Ring is in place on main body male thread. Fax: 0181 507 2691 PX0811 Fits PX0800. Ensure “O” Ring is in place in cap. email: [email protected]