KAD07 SERIES OPEN FRAME AC - DC POWER MODULE 6.3 ~ 7.6W UL / cUL / TUV / CE FEATURES ‧AC/DC POWER MODULE ‧UNIVERSAL INPUT 85 ~ 265 VAC ‧HIGH EFFICIENCY UP TO 79% ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY R H a UL 60950-1 EN 60950-1 MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) CAPACITOR LOAD (max.) Single Output Models KAD0703 85~265 VAC 6.6 WATTS +3.3 VDC 2000 mA 69% 72% 7000μF KAD0705 85~265 VAC 7.5 WATTS + 5 VDC 1500 mA 72% 75% 7000μF KAD0712 85~265 VAC 7.5 WATTS + 12 VDC 630 mA 75% 78% 7000μF KAD0715 85~265 VAC 7.5 WATTS + 15 VDC 500 mA 75% 78% 7000μF KAD0724 85~265 VAC 7.6 WATTS + 24 VDC 320 mA 77% 79% 7000μF ± 320 mA 74% 77% Dual Output Models KAD0712D 85~265 VAC 7.6 WATTS KAD0715D 85~265 VAC 7.5 WATTS ± 15 VDC ± 250 mA 75% 78% ± 3500μF ± 3500μF +1A / +0.6A 65% 68% 3500μF +0.6A / +0.3A 72% 75% 3500μF ± 12 VDC KAD07503D 85~265 VAC 6.3 WATTS + 3.3 /+ 5 VDC KAD07512D 85~265 VAC 6.6 WATTS + 5 /+ 12 VDC SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions min. typ. unit max. Switching frequency Vi nom, Io nom 80 Isolation voltage Input - Output 3000/4242 VAC/VDC Input - FG 100 KHz 1500/2121 VAC/VDC Isolation resistance Input - Output, @ 500VDC 100 MΩ Ambient temperature Operating at Vi nom, Io nom -40 o Derating Vi nom, +51 to + 71 C Storage temperature Non operational -40 Relative humidity Vi nom, Io nom 20 Temperature coefficient Vi nom, Io min www.chinfa.com 2010.03.19 + 71 2 +100 o C % / oC o C 95 % RH ± 0.03 % / oC [email protected] P1 KAD07 SERIES OPEN FRAME AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics MTBF Altitude during operation Conditions min. o Bellcore issue 6 @40 C, GB 3.3V & 503D models max. unit 1510000 Hours 5V & 512D models 1530000 Hours 12V & 15V models 1550000 Hours 24V, 12D & 15D models 1580000 Hours IEC 60068-2-13 m 4850 Dimension Cooling typ. mm L58 x W45 x H17.5 Free air convection INPUT SPECIFICATIONS Characteristics min. Conditions Rated input voltage Io nom Input voltage range Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 85 VAC, Io nom Line frequency Vi nom, Io nom typ. max. 85 240 VAC AC in 85 265 VAC DC in 120 375 VDC 160 / 120 mA 250 mA 63 Hz 10/18 A 0.25 mA 3.5 mA 47 Inrush current Vi : 115 / 230 VAC, Io nom Leakage current Input - Output unit Input - FG OUTPUT SPECIFICATIONS Characteristics Output voltage accuracy Minimum load Conditions typ. max. Vi nom, Io nom Vi nom single output models unit % ±2 dual output models (each output) Line regulation min. 0 % 20 % Io nom, Vi min ...Vi max ±1 % single output models ±2 % dual output models ±5 % ±6 % Load regulation Vi nom, Io min ...Io nom Cross regulation (Dual model) Asymmetrical load 20% - 100% FL Hold up time Vi:115/230 VAC, Io nom Turn on time Vi nom, Io nom 1000 ms Rise time Vi nom, Io nom 150 ms Fall time Vi nom, Io nom 150 ms Transient recovery time Vi nom, 1~0.5 Io nom 1 ms 60 mV 100 mV Ripple & noise Efficiency ms 15/30 Vi nom, Io nom, 3.3V model BW = 20MHz 5V, 12V, 15V, 24V & dual Vi nom, Io nom, Po / Pi Up to 79%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection www.chinfa.com 2010.03.19 max. unit T2A / 250VAC internal Varistor IEC 61000-4-5 Fold forward Output short circuit Rated over load protection typ. Vi nom (see typ current limited curve) 130 170 % [email protected] P2 KAD07 SERIES OPEN FRAME AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 60950-1, Recognized TUV EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3 EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 EN 61000-4-11, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 axes, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 58 x 45 x 17.5mm (2.28 x 1.77 x 0.70 inches) Case material Plastic Weight 50g MECHANISM & PIN CONFIGURATION mm [inch] 45.00 [1.77] 5.00 [0.20] 17.50 [0.69] 17.50 [0.69] 5.00 [0.20] 4.00 [0.16] BURL AT 4 CORNER 3 1 2 17.50 [0.70] 47.00 [1.85] 28.90 [1.14] 6.00 [0.24] DIA 1.00 [0.04] 58.00 [2.28] TP 3 x 6 23.00 [0.91] 4 5 6 7.00 [0.28] 12.50 [0.49] GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 12.50 [0.49] 10.00 [0.39] 10.00 [0.39] BOTTOM VIEW PIN ASSIGNMENT GENERAL PIN NO. 1 2 3 4 5 6 SINGLE AC IN AC IN F. G. Vo - NO PIN Vo + AC IN AC IN F. G. Vo - com Vo + +3.3V +5V DUAL 12D, 15D 503D AC IN AC IN F. G. + 5V com 512D AC IN AC IN F. G. +12V com www.chinfa.com 2010.03.19 [email protected] P3 KAD07 SERIES OPEN FRAME AC - DC POWER MODULE CIRCUIT SCHEMATIC ‧Block diagram for KAD07 series with single output Fuse AC IN ‧Block diagram for KAD07503D & KAM07512D Fuse Vo + AC IN Rectifier Inrush Current Limiter and Rectifier Line Filter Switching Device Line Filter Vo - AC IN Inrush Current Limiter and Rectifier Switching Device Rectifier Vo 2 Rectifier Vo1 com AC IN Y Y Control Circuit Control Reference & Error Amp. Opto Isolation Opto Isolation Reference & Error Amp. FG FG ‧Block diagram for KAD07 series with dual output AC IN Fuse Vo + Rectifier Line Filter Inrush Current Switching Limiter and Device Rectifier com Rectifier AC IN Vo - Y Control Circuit Reference & Error Amp. Opto Isolation FG TYP. CURRENT LIMITED CURVE Output Voltage [ % ] KAD0724 100 75 50 25 0 100 230 Vac 115 Vac 110 120 130 140 150 160 170 Output Current [ % ] DERATING CURVE TYP. EFFICIENCY CURVE KAD0724 85 80 EFFICIENCY [ % ] Power out [ % ] 100 60 0 -40 2010.03.19 70 65 60 230 Vac 115 Vac 55 50 51 Temperature [ oC ] www.chinfa.com 75 71 10 25 50 75 100 Power out [ % ] [email protected] P4