EDA100 SERIES AC-DC ENCLOSED SWITCHING POWER SUPPLY FEATURES ‧UNIVERSAL INPUT 88~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧3 YEARS WARRANTY ‧HIGH EFFICIENCY UP TO 89% ‧HIGH AVERAGE EFFICIENCY MEET ErP (except 5V model) ‧LOW STANDBY POWER CONSUMPTION ‧BUILT IN ACTIVE PFC R H a UL 60950-1 EN 60950-1 MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) EFF. (avg.) Single Output Models EDA100-05 88~264 VAC 80 WATTS + 5 VDC 16000 mA 78% 80% 80% EDA100-12 88~264 VAC 102 WATTS + 12 VDC 8500 mA 85% 87% 87% EDA100-15 88~264 VAC 105 WATTS + 15 VDC 7000 mA 86% 88% 87% EDA100-24 88~264 VAC 108 WATTS + 24 VDC 4500 mA 87% 89% 88% SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics min. min. typ. typ. max. max. unit unit Switching frequency Vi nom, Io nom Isolation voltage Input-Output 3,000 / 4,242 VAC / VDC Input-FG 1,500 / 2,121 VAC / VDC 500 / 710 VAC / VDC 60 Output-FG Isolation resistance Input-Output, @ 500VDC Ambient temperature Operating at Vi nom 75 100 MΩ + 71 -40 o KHz o o C % / oC Derating (see derating curve) Vi nom, from 56 C to + 71 C Storage temperature Non operational -40 + 85 Relative humidity Vi nom, Io nom 20 95 % RH Temperature coefficient Vi nom, Io min ± 0.03 % / oC MTBF Altitude during operation o Bellcore Issue 6 @40 C, GB www.chinfa.com 2014.09.01 o C 5V 470,000 Hours 12V & 15V 521,000 Hours 24V 545,000 Hours IEC 60068-2-13 Dimension Cooling 2.5 4,850 L158 x W97 x H38 m mm Free air convection [email protected] P1 EDA100 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Rated input voltage Conditions Input current Rated input current Vi : 115 / 230 VAC , Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom Leakage current max. unit 240 VAC AC in 88 264 VAC DC in 120 375 VDC Io nom Absolute input max. range typ. 100 min. 1,060/ 530 Vi : 88 VAC, Io nom 47 Vi : 230 VAC, Io nom Power factor (Active) mA 63 35 / 60 Hz A 5V 20 W 12V 15V 15 W 12 W 24V 10 Input-Output W 0.25 mA 3.5 0.8 mA 5V 12V, 15V & 24V 0.5 W max. unit +1 % Input-FG Standby power consumption mA 1,500 Vi nom, Io=0A Vi : 115/230VAC, Io nom W 0.99 / 0.96 OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Vi nom Turn on time Vi nom, Io nom Vi nom, Io nom 10.8 13.2 VDC 13.5 16.5 VDC 24V 5V 21.6 27.6 VDC 16 A @ 5Vdc / 1.4 A @ 5.5 Vdc 8.5 A @ 12Vdc / 7.6 A @ 13.2 Vdc 7.0 A @ 15Vdc / 6.0 A @ 16.5 Vdc 4.5 A @ 24Vdc / 3.6 A @ 27.6 Vdc 5V, 12V &15V models : with 7000μF CAP 24V model : with 3500μF CAP Vi nom, Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Power back immunity Vi nom, Io nom 1 second Vi nom, 1~0.5 Io nom Vi nom, Io nom Efficiency Vi nom, Io nom, Po / Pi ms ms 2,000 ms 150 ms 500 ms 150 ms 2 ms 100 mV 5V 7.5 VDC 12V 15V 18 VDC 22 35 VDC 24V 5V, 12V &15V Capacitor load 1,500 10 / 70 5V, 12V &15V models : with 7000μF CAP Fall time Transient recovery time % 12V 15V Vi nom, Io nom Vi nom, Io nom VDC 4.75 24V model : with 3500μF CAP Rise time % 5V 24V Vi : 115 / 230 VAC , Io nom % ± 0.5 ±1 5.5 12V 15V Hold up time typ. 24V 7,000 VDC μF μF 3,500 Up to 89%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection Rated over load protection www.chinfa.com 2014.09.01 typ. max. unit T3.15A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Varistor 130 160 % [email protected] P2 EDA100 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics min. max. unit 5.75 6.75 VDC 12V 13.8 16.2 VDC 15V 17.25 20.25 VDC 24V 28.8 32.4 VDC Vi nom, 0.8 Io nom (Auto Recovery) Over voltage protection typ. 5V Conditions Output short circuit Hiccup mode APPROVALS AND STANDARDS UL / cUL UL 60950-1 Recognized TUV EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 55024 EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 EN 61000-4-11, ENV 50204, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 158 x 97 x 38 mm (6.22 x 3.82 x 1.50 inches) Case material Metal Weight 520 g Packing 0.57kg ; 24 / 14.5kg / 1.01CUFT MECHANISM & PIN CONFIGURATION mm [inch] 158.00 [6.22] 101.00 [3.98] INSTALLATION 99.00 [3.90] 64.00 [2.52] 5-M3 L=Max 4mm 23.00 [0.91] 97.00 [3.82] 38.00[1.50] 73.00 [2.87] 9.50 [0.38] 65.00 [2.56] 91.50 [3.60] 7.00 [0.28] Ventilation / Cooling Normal convection Connector size range AWG22-14 (0.2~2mm2 ) flexible / solid cable, connector can withstand torque at maximum 12 pound-inches. GENERAL TOLERANCE Vout ADJ. 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 120.00[4.72] - 400.00[15.75] ±0.80[0.03] DC ON 3.50 [0.14] 154.50 [6.08] www.chinfa.com 117.00 [4.61] 38.00 [1.50] 38.00 [1.50] 28.50 [1.12] 3-M3 L=Max 5mm Ø3. 5 10.80 [0.43] 18.00 [0.71] Ø3.5 21.00 [0.83] 2014.09.01 97.00 [3.82] 152.50 [6.00] 19.30 [0.76] 28.80 [1.13] 5.50 [0.22] 1 2 L N (AC) 3 4 V 5 6 7 V +V +V +V Vout AD [email protected] P3 EDA100 SERIES PIN ASSIGNMENT Designation PIN NO. Input terminals (phase conductor, no polarity at DC input) Input terminals (neutral conductor, no polarity at DC input) IN 2 Description L N OTHER OUT 1 V - Negative output terminal V+ Vout ADJ. Positive output terminal DC ON Operation indicator LED Ground this terminal to minimize high-frequency emissions 3 4, 5 6,7 Trimmer-potentiometer for Vout adjustment CIRCUIT SCHEMATIC ‧Block diagram for EDA100 series L Fuse Vo + Rectifier Line Filter Inrush Current Limiter and Rectifier Active PFC Circuit Switching Device Vo - N Y Control Circuit FG Reference & Error Amp. Opto Isolation Vout ADJ. DERATING CURVE Ta=55oC for EDA100-12/15/24 Ta=50oC for EDA100-05 100 Power out [ % ] Power out [ % ] 100 62.5 50 Safe Operating Area 0 -40 -25 88 Safe Operating Area 230 Vac 115 Vac 51 56 71 88 o For EDA100-12/15/24 100 264 Input Voltage [VAC] Temperature [ C ] For EDA100-05 TYP. CURRENT LIMITED CURVE TYP. EFFICIENCY CURVE EDA100-24 90 88 EDA100 Hiccup mode EFFICIENCY [ % ] Output Voltage [ % ] v 100 50 t Time www.chinfa.com 2014.09.01 86 84 82 80 10 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P4