KADN40 SERIES OPEN FRAME AC - DC POWER MODULE 28 ~ 40W UL / cUL / TUV / CE FEATURES ‧AC/DC POWER MODULE ‧UNIVERSAL INPUT 85 ~ 265 VAC ‧HIGH EFFICIENCY UP TO 87% ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY ‧MEDICAL SAFETY APPROVED ‧LOW LEAKAGE CURRENT R R H H UL 60950-1 EN 60601-1 UL 60601-1 a EN 60950-1 MODEL LIST INPUT VOLTAGE MODEL NO. OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) CAPACITOR LOAD (max.) Single Output Models 28 WATTS + 3.3 VDC 8500 mA 76% 78% 7000μF 85 ~ 265 VAC 40 WATTS + 5 VDC 8000 mA 80% 82% 7000μF 85 ~ 265 VAC 40.8 WATTS + 12 VDC 3400 mA 84% 86% 7000μF KADN4015 85 ~ 265 VAC 40.5 WATTS + 15 VDC 2700 mA 85% 87% 7000μF KADN4024 85 ~ 265 VAC 40.8 WATTS + 24 VDC 1700 mA 85% 87% 3500μF KADN4003 85 ~ 265 VAC KADN4005 KADN4012 Dual Output Models KADN4012D 85 ~ 265 VAC 40.8 WATTS ± 12 VDC ± 1700 mA 83% 85% ± 7000μF KADN4015D 85 ~ 265 VAC 40.5 WATTS ± 15 VDC ± 1350 mA 84% 86% KADN40512D 85 ~ 265 VAC 40 WATTS +5 / + 12 VDC +5A / + 1.25A 81% 83% ± 7000μF 7000μF KADN40524D 85 ~ 265 VAC 39 WATTS +5 / + 24 VDC +3A / + 1A 81% 83% 7000μF SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions min. typ. unit max. Switching frequency Vi nom, Io nom Isolation voltage Input - Output 4236/6000 VAC/VDC Isolation resistance Input - Output, @ 500VDC 100 MΩ Operating at Vi nom, Io nom -40 Ambient temperature 1) 65 o KHz + 71 o C % / oC Derating Vi nom, +61 to + 71 C Storage temperature Non operational -40 +100 Relative humidity Vi nom, Io nom 20 95 % RH Temperature coefficient Vi nom, Io min ± 0.03 % / oC 2.5 o C NOTE1 : Pls refer to DERATING CURVE. www.chinfa.com 2010.03.19 [email protected] P1 KADN40 SERIES OPEN FRAME AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions Bellcore issue 6 @40 oC, GB MTBF Altitude during operation IEC 60068-2-13 Dimension Cooling Free air convection min. typ. max. unit 3.3V, 5V, 512D & 524D models 608000 Hours 12V, 12D & 15D models 618000 Hours 15V & 24V models 625000 4850 Hours m mm L85.3 x W60.3 x H24.2 INPUT SPECIFICATIONS Characteristics Rated input voltage Io nom Ta min ... Ta max, Io nom Input voltage range min. Conditions Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 100 ~ 240 VAC, Io nom Line frequency Vi nom, Io nom typ. max. unit VAC 100 240 AC in 85 265 VAC DC in 120 375 VDC 0.75 / 0.45 A 0.8 - 0.4 A 63 20/40 Hz 47 Vi : 115 / 230 VAC, Io nom Inrush current Leakage current Normal condition Single fault condition 300 A μA μA 100 OUTPUT SPECIFICATIONS Characteristics Conditions Vi nom, Io nom Output voltage accuracy Minimum load Vi nom max. unit ±1 % dual output models ±2 % 524D model single output models ±4 % dual output models (each output) Line regulation Io nom, Vi min ...Vi max Vi nom, Io min ...Io nom Load regulation typ. single output models min. 0 % 20 % ±1 % single output models ±1 % dual output models ±2 % ±6 % ms Cross regulation (Dual model) Asymmetrical load 20% / 100% FL Hold up time Vi : 115 / 230 VAC, Io nom Turn on time Vi nom, Io nom 1000 ms Rise time Vi nom, Io nom 150 ms Fall time Transient recovery time Vi nom, Io nom 150 ms 1 ms 50 mV +10 % Vi nom, 1~0.5 Io nom Ripple & noise External trim ADJ. Range (for single output only) 20/100 Vi nom, Io nom, BW = 20MHz 2) Efficiency -10 Io = 5% ...100% Vi nom, Io nom, Po / Pi Up to 87%, See model list and typ efficiency curve NOTE 2 : Pls refer to Fig 1 & Table 1 for connection and resistance recommended. CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection www.chinfa.com 2010.03.19 max. unit Varistor IEC 61000-4-5 Hiccup mode Output short circuit Rated over load protection typ. T2A / 250VAC internal Vi nom (see typ current limited curve) 120 160 % [email protected] P2 KADN40 SERIES OPEN FRAME AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 60950-1, UL 60601-1 Recognized TUV EN 60950-1, EN 60601-1 CE EN 60601-1-2, EN 55011, EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5 EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 axes, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 85.3 x 60.3 x 24.2mm ( 3.36 x 2.37 x 0.95 inches) Case material Plastic Weight 130g MECHANISM & PIN CONFIGURATION mm [inch] 60.30 [2.37] 2.20 [0.09] 2.20 [0.09] 27.90 [1.10] 27.90 [1.10] 5 4 3 24.20 [0.95] 81.20 [3.20] 85.30 [3.36] DIA 1.00 [0.04] 5.50 [0.22] 54.50 [2.15] 43.30 [1.70] 1 GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 2 55.80 [2.20] BOTTOM VIEW PIN ASSIGNMENT GENERAL 4 5 Vo + Vo - Trim Vo + com Vo +12V +24V PIN NO. 1 2 3 SINGLE AC IN AC IN DUAL 12D, 15D AC IN AC IN 512D AC IN AC IN +5V com 524D AC IN AC IN +5V com CIRCUIT SCHEMATIC ‧Block diagram for KADN40 series with dual output ‧Block diagram for KADN40 series with single output AC IN Fuse Vo + Rectifier Line Filter Vo - Control Circuit www.chinfa.com Fuse Opto Isolation Reference & Error Amp. Trim Vo + Rectifier Line Filter AC IN 2010.03.19 AC IN Inrush Current Switching Limiter and Device Rectifier Inrush Current Switching Limiter and Device Rectifier com Rectifier AC IN Control Circuit Opto Isolation Vo - Reference & Error Amp. [email protected] P3 KADN40 SERIES OPEN FRAME AC - DC POWER MODULE TYP. CURRENT LIMITED CURVE CIRCUIT SCHEMATIC ‧Block diagram for KADN40512D & KADN40524D AC IN Fuse Line Filter Inrush Current Switching Limiter and Device Rectifier Rectifier +5V Rectifier +12V or +24V com AC IN Control Circuit Reference & Error Amp. Opto Isolation Output Voltage [ % ] v KADN4024 Hiccup mode 100 50 t Time DERATING CURVE 100 75 Power out [ % ] Power out [ % ] 1 Ta = +60 oC 0 -40 61 Temperature [ oC ] 100 75 85 71 2 Ta = -40 oC 90 115 230 Input Voltage [ VAC ] 265 Fig. 1 Trim connection (For single output only) TYP. EFFICIENCY CURVE KADN4024 EFFICIENCY [ % ] 85 80 5 75 4 70 230 Vac 115 Vac 65 3 Trim 5 Vo - Rext 1 Vo + 4 3 Trim Rext 2 Vo Vo + 60 10 25 50 Power out [ % ] 75 100 Table 1 Typical resistor values for various output voltage adjustment settings and max continuous power Type Rext 1 Rext 2 Vo nom -5% Vo nom -10% Vo nom +5% Vo nom +10% KADN4003 20KΩ 5.1KΩ 3KΩ 1KΩ Max continuous power 28 W KADN4005 5.1KΩ 1KΩ 6.8KΩ 2KΩ 40 W KADN4012 39KΩ 20KΩ 10KΩ 0Ω 40.8 W KADN4015 180KΩ 56KΩ 30KΩ 5.1KΩ 40.5 W KADN4024 150KΩ 51KΩ 8.2KΩ 0Ω 40.8 W www.chinfa.com 2010.03.19 [email protected] P4