KAD/KAM15 SERIES AC - DC POWER MODULE 13 ~ 15W SINGLE & DUAL OUTPUT FEATURES ‧AC/DC POWER MODULE ‧UNIVERSAL INPUT 85 ~ 265 VAC ‧HIGH EFFICIENCY UP TO 82% ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧3 YEARS WARRANTY KAM15 series KAD15 series OPEN FRAME R H a UL 60950-1 EN 60950-1 MODEL LIST MODEL NO. INPUT OUTPUT VOLTAGE WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. CAPACITOR LOAD (typ.) (max.) Single Output Models KAM1503 / KAD1503 85~265 VAC 13 WATTS +3.3 VDC 4000 mA 70% 73% 7000μF KAM1505 / KAD1505 85~265 VAC 15 WATTS + 5 VDC 3000 mA 74% 76% 7000μF KAM1512 / KAD1512 85~265 VAC 15 WATTS + 12 VDC 1250 mA 80% 82% 3500μF KAM1515 / KAD1515 85~265 VAC 15 WATTS + 15 VDC 1000 mA 80% 82% 1500μF KAM1524 / KAD1524 85~265 VAC 15 WATTS + 24 VDC 625 mA 80% 82% 470μF ± 625 mA 79% 81% ± 1000μF Dual Output Models KAM1512D / KAD1512D 85~265 VAC 15 WATTS KAM1515D / KAD1515D 85~265 VAC 15 WATTS ± 15 VDC ± 500 mA 78% 80% ± 470μF KAM15503D / KAD151503D 85~265 VAC 15 WATTS + 5 /+ 3.3 VDC +1A / +3A 72% 74% 3500μF ± 12 VDC SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions Switching frequency Vi nom, Io nom Isolation voltage Input - Output Isolation resistance Ambient temperature Case temperature Operating at Vi nom, Io nom min. 100 unit KHz VAC/VDC Input - Output, @ 500VDC 100 MΩ Operating at Vi nom, Io nom -40 KAM15 o Vi nom, +51 to + 71 C Storage temperature Non operational -40 Relative humidity Vi nom, Io nom 20 Temperature coefficient Vi nom, Io min 2014.09.01 max. 3,000/4,242 Derating www.chinfa.com typ. + 71 o + 85 o C C % / oC 2 o +100 C 95 % RH ± 0.03 % / oC [email protected] P1 KAD/KAM15 SERIES AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions o Bellcore issue 6 @40 C, GB MTBF Altitude during operation min. typ. max. 3.3V, 5V & 503D 1,220,000 Hours 12V, 15V & 24V 1,250,000 Hours 12D & 15D 1,230,000 Hours IEC 60068-2-13 4,850 Dimension Cooling unit m KAM15 L76.2 x W50.8 x H22.8 mm KAD15 L76.2 x W50.8 x H22 mm Free air convection INPUT SPECIFICATIONS Characteristics Rated input voltage unit 85 265 VAC AC in 85 265 VAC DC in 120 375 VDC Io nom Input voltage range Input current Ta min ... Ta max, Io nom Vi : 115 / 230 VAC, Io nom Rated input current Vi : 85 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Leakage current Vi : 115 / 230 VAC, Io nom Input - Output typ. max. min. Conditions 310 / 190 mA 47 500 mA 63 10/18 Hz 0.25 mA max. unit ±2 % A OUTPUT SPECIFICATIONS Characteristics Conditions Output voltage accuracy Vi nom,Io nom Minimum load Vi nom Line regulation Io nom, Vi min ...Vi max Load regulation Vi nom, Io min ...Io nom Cross regulation min. single output models 0 dual output models (each output) 20 typ. % % ±1 % single output models ±2 % dual output models ±2 % Asymmetrical load 20% / 100% FL % ±6 ms Hold up time Vi : 115 / 230 VAC, Io nom Turn on time Vi nom, Io nom 1,000 ms Rise time Vi nom, Io nom 150 ms Fall time Vi nom, Io nom 150 ms Transient recovery time Vi nom, 1~0.5 Io nom 1 ms 3.3V & 5V 100 mV 12V, 15V, 24V & dual 150 mV + 10 % Ripple & noise Vi nom, Io nom, BW = 20MHz External trim ADJ. Range (for single output only) 15/30 1) Efficiency - 10 Io = 5% ...100% Vi nom, Io nom, Po / Pi Up to 82%, See model list and typ efficiency curve NOTE 1 : Pls refer to Fig 1 & Table 1 for connection and resistance recommended. CONTROL AND PROTECTION Characteristics Conditions Input fuse Internal surge voltage protection Output short circuit www.chinfa.com 2014.09.01 min. typ. unit max. T2A / 250VAC internal IEC 61000-4-5 Varistor Hiccup mode [email protected] P2 KAD/KAM15 SERIES AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 60950-1, Recognized TUV EN 60950-1 EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 CE EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3 EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3 EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 Vibration resistance EN 61000-4-11, EN 61204-3 meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 axes, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size KAM15 : 76.2 x 50.8 x 22.8mm ( 3 x 2 x 0.90 inches) Case (Base) material Weight Plastic KAM15 : 160g Potting material KAM15 : Epoxy KAD15 : 76.2 x 50.8 x 22mm ( 3 x 2 x 0.87 inches) KAD15 : 100g MECHANISM & PIN CONFIGURATION mm [inch] 50.80 [2.00] 50.80 [2.00] 25.40 [1.00] 12.70 [0.50] 25.40 [1.00] 5.10 [0.20] 1 5.10 [0.20] BURL AT 4 CORNER 2 1 25.40 [1.00] 2 25.40 [1.00] 55.90 [2.20] KAM15 52.50 [2.07] TP 3 x 8 76.20 [3.00] TP 3 x 8 55.90 [2.20] KAD15 52.50 [2.07] 4 6 5 4 3 6 10.00 [0.40] 5 3 5.10 [0.20] 20.30 [0.80] 76.20 [3.00] BURL AT 4 CORNER 12.70 [0.50] 10.00 [0.40] 5.10 [0.20] 20.30 [0.80] 20.30 [0.80] BOTTOM VIEW 20.30 [0.80] BOTTOM VIEW 22.80 [0.90] 22.00 [0.87] 6.00 [0.24] 6.00 [0.24] DIA 1.00 [0.04] DIA 1.00 [0.04] GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT GENERAL PIN NO. 1 3 4 5 6 Vo - Trim Vo + AC IN Vo - NO PIN NO PIN com AC IN +3.3V NO PIN com +5V SINGLE DUAL 12D, 15D AC IN 2 AC IN AC IN 503D AC IN www.chinfa.com 2014.09.01 Vo + [email protected] P3 KAD/KAM15 SERIES AC - DC POWER MODULE CIRCUIT SCHEMATIC ‧Block diagram for KAM(D)15 series with dual output ‧Block diagram for KAM(D)15 series with single output Fuse AC IN Vo + AC IN Rectifier Line Filter Inrush Current Switching Limiter and Device Rectifier Fuse Vo - AC IN Control Circuit Inrush Current Switching Limiter and Device Rectifier com Rectifier AC IN Reference & Error Amp. Opto Isolation Vo + Rectifier Line Filter Control Circuit Vo - Reference & Error Amp. Opto Isolation Trim ‧Block diagram for KAM(D)15503D AC IN Fuse LDO Rectifier Line Filter Inrush Current Switching Limiter and Device Rectifier 5V Regulator 3.3V Rectifier com AC IN Control Circuit Reference & Error Amp. Opto Isolation TYP. CURRENT LIMITED CURVE DERATING CURVE 100 Hiccup mode Power out [ % ] Output Voltage [ % ] v 100 50 t Safe Operating Area 0 -40 Time TYP. EFFICIENCY CURVE 60 51 Temperature [ oC ] 71 Fig. 1 Trim connection (For single output only) KAM(D)1524 EFFICIENCY [ % ] 80 6 Vo + 70 60 4 Trim 3 Vo - 230 Vac 115 Vac 50 Rext 1 6 Vo + 4 Trim 3 Vo - Rext 2 40 10 25 50 Power out [ % ] 75 100 Table 1 Typical resistor values for various output voltage adjustment settings and max continuous power Type Rext 1 Rext 2 Vo nom -10% Vo nom +5% KAM(D)1503 180KΩ 56KΩ 100KΩ 20KΩ 13W KAM(D)1505 39KΩ 15KΩ 9.1KΩ 2.2KΩ 15W KAM(D)1512 51KΩ 20KΩ 10KΩ 15W KAM(D)1515 150KΩ 68KΩ 20KΩ 2KΩ 4.7KΩ KAM(D)1524 130KΩ 56KΩ 12KΩ 2KΩ 15W www.chinfa.com 2014.09.01 Vo nom +10% Max continuous power Vo nom -5% 15W [email protected] P4