CPC1008N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 100 150 8 Description CPC1008N is a miniature, low-voltage, low on-resistance 1-Form-A solid state relay in a 4-Pin SOP package. The relay uses optically coupled MOSFET technology to provide 1500Vrms of input/ output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The CPC1008N uses Clare’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1008N is ideal for replacing larger, less-reliable reed and electromechanical relays. Units VP mA Ω Features • Small 4-Pin SOP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security Systems • Aerospace • Industrial Controls • Reed Relay Replacement Ordering Information Part # CPC1008N CPC1008NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control – Control 1 4 3 2 Load Load Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON DS-CPC1008N-R05 www.clare.com TOFF 1 CPC1008N Absolute Maximum Ratings (@ 25˚C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Capacitance Input to Output Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 100 5 50 1 70 400 1 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW pF Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current 1 2 2 Conditions Symbol Min Typ Max t=10ms IL=150mA VL=100V IL ILPK RON ILEAK - 4.7 - 150 350 8 1 50V; f=1MHz TON TOFF COUT - 25 2 0.5 - IL=150mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.4 1.2 - 2 1.4 10 IF=5mA, VL=10V Units mA Ω µA ms pF mA mA V µA Load current derates linearly from 150mA @ 25oC to 120mA @ 85oC. Measurement taken within 1 second of on time. www.clare.com R05 CPC1008N PERFORMANCE DATA* CPC1008N Typical LED Forward Voltage Drop (Ambient Temperature = 25°C) IF = 5mA 35 35 20 15 10 30 25 20 15 10 5 5 0 0 1.19 1.21 1.23 1.25 4.24 4.56 4.88 5.20 5.52 On-Resistance (½) 25 20 15 10 111 25 20 15 10 0.50 0.30 0.35 25 0.40 0.45 0.50 15 10 5 CPC1008N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated 0.016 180 0.014 170 0.012 160 150 140 IF =10mA 130 IF =5mA 120 0.010 0.008 0.006 0.004 0.002 0 -40 -20 0 20 80 100 -40 120 -20 0 Turn-On (ms) 118 116 114 112 110 108 80 100 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0 -40 IF=5mA IF=10mA -20 0 20 40 60 Temperature (°C) 80 20 40 60 Temperature (°C) 80 100 CPC1008N Typical Turn-Off vs. Temperature (Load Current = 100mA) Turn-Off (ms) 120 20 40 60 Temperature (°C) 60 CPC1008N Typical Turn-On vs. Temperature (Load Current = 100mA) 122 0 40 Temperature (°C) CPC1008N Typical Blocking Voltage vs. Temperature -20 5 190 Turn-Off (ms) -40 10 0.285 0.315 0.345 0.375 0.405 0.435 0.465 100 0.282 0.288 0.294 0.300 0.306 0.312 0.318 117 Turn-On (ms) 110 0 116 15 0.55 CPC1008N Typical Maximum Load Current vs. Temperature Load Current (mA) 20 115 20 LED Current (mA) LED Current (mA) CPC1008N Typical Turn-Off Time (Ambient Temperature = 25°C) (Load Current = 150mA; IF = 5mA) 114 0 0.25 0.55 Leakage (µA) 0.45 113 CPC1008N Typical Turn-On Time (Ambient Temperature = 25°C) (Load Current = 150mA; IF = 5mA) 25 0 0 112 Blocking Voltage (VP) 5 5 0.40 10 5.84 Device Count (N) 30 Device Count (N) Device Count (N) 35 30 0.35 15 CPC1008N Typical IF for Switch Dropout (Ambient Temperature 25°C) (Load Current = 100mA) 35 0.30 20 0 3.92 CPC1008N Typical IF for Switch Operation (Ambient Temperature = 25°C) (Load Current = 100mA) 0.25 25 5 LED Forward Voltage Drop (V) Device Count (N) 35 Device Count (N) 25 1.17 Blocking Voltage (VP) CPC1008N Typical Blocking Voltage Distribution (Ambient Temperature = 25°C) 30 Device Count (N) Device Count (N) 30 CPC1008N Typical On-Resistance Distribution (Ambient Temperature = 25°C) (Load Current = 150mA, IF = 2mA) 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IF=5mA -40 -20 0 20 40 60 Temperature (°C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.clare.com 3 CPC1008N PERFORMANCE DATA* CPC1008N Typical Turn-On vs. LED Forward Current (Load Current = 120mA) 1.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 120 0.35 0.30 0 5 10 IF = 5mA 4 2 25 30 35 40 45 20 40 60 80 100 0 -50 -100 0 0.5 Load Voltage (V) 1.0 1.5 10 15 20 25 30 35 40 50 45 CPC1008N Typical IF for Switch Dropout vs. Temperature (Load Current = 100mA) 1.25 1.25 1.00 0.75 0.50 1.00 0.75 0.50 0.25 0 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) CPC1008N Energy Rating Curve Load Current (A) 50 -0.5 5 LED Forward Current (mA) Temperature (°C) 100 -1.0 0 1.50 -40 CPC1008N Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mA -150 -1.5 0 50 0 0 0.10 1.50 Temperature (°C) Load Current (mA) 20 0.25 0 150 15 LED Current (mA) 8 LED Current (mA) On-Resistance (½) IF = 10mA -20 0.15 CPC1008N Typical IF for Switch Operation vs. Temperature (Load Current = 100mA) 12 -40 0.20 LED Forward Current (mA) CPC1008N Typical On-Resistance vs. Temperature (Load Current = max rated @ temperature) 6 0.25 0.05 Temperature (°C) 10 CPC1008N Typical Turn-Off vs. LED Forward Current (Load Current = 120mA) Turn-Off (ms) 1.8 Turn-On (ms) LED Forward Voltage Drop (V) CPC1008N Typical LED Forward Voltage Drop vs. Temperature 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R05 CPC1008N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 1.02 ± 0.025 (0.040 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.55 (0.0217) 0.200 ± 0.025 (0.008 ± 0.001) 0.432 TYP. (0.017 TYP.) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1008N-R05 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/27/08 5