CPC1018N
4-Pin SOP OptoMOS® Relay
Blocking Voltage
CPC1018N
60
Units
V
600
Load Current
Max On-resistance
0.8
mA
Ω
LED Current to operate
1.0
mA
Description
Features
• Designed for use in security systems complying
with EN50130-4
• Only 1mA of LED current required to operate
• Small 4-Pin SOP Package
• TTL/CMOS Compatible input
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Immune to radiated EM fields
• SMD Pick & Place, Wave Solderable
• Tape & Reel Version Available
The CPC1018N is a miniature 1-Form-A solid state
relay in a 4-Pin SOP package that employs optically
coupled MOSFET technology to provide 1500Vrms of
input to output isolation. The super efficient MOSFET
switches and photovoltaic die use Clare’s patented
OptoMOS® architecture. The optically coupled input is
controlled by a highly efficient GaAlAs infrared LED.
The CPC1018N uses Clare’s state of the art double
molded vertical construction packaging to produce the
world’s smallest relay. The CPC1018N offers board
space savings of at least 20% over the competitor’s
larger 4-Pin SOP relay. It boasts the industries'
lowest input current to operate in its class.
Approvals
• UL recognized file #E76270
• Certified to EN60950
Ordering Information
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Part #
CPC1018N
Description
4-Pin SOP (100/tube)
CPC1018NTR
4-Pin SOP (2000/reel)
Pin Configuration
CPC1018N Pinout
+ Control
– Control
1
4
2
3
Load
Load
Switching Characteristics of
Normally Open (Form A) Devices
10ms
CONTROL
+
90%
LOAD
10%+
10%+
TON
RoHS
2002/95/EC
DS-CPC1018N-R03
TOFF
e3
www.clare.com
1
CPC1018N
Absolute Maximum Ratings (@ 25˚C)
Parameter
Blocking Voltage
1
Ratings
60
Units
V
Reverse Input Voltage
5
V
Input Control Current
Peak (10ms)
50
mA
1
A
Input Power Dissipation
70
mW
Total Power Dissipation 1
400
mW
Isolation Voltage Input to
Output
1500
Vrms
Operational Temperature
-40 to +85
°C
Storage Temperature
-40 to +125
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 3.33 mw / ºC
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current 1
Peak Load Current
On-Resistance2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Capacitance Input to Output
Input Characteristics @ 25°C
Input Control Current 3
Input Dropout Current
Conditions
Symbol
Min
Typ
Max
IF=2mA, Continuous
IL
-
-
600
mA
10ms
ILPK
-
-
1.0
IL=100mA
RON
-
-
0.8
Arms
Ω
VL=60V
ILEAK
-
-
1
µA
-
3
ms
-
Units
IF=5mA, VL=10V
TON
IF=5mA, VL=10V
TOFF
-
-
2
ms
50V; f=1MHz
COUT
-
25
-
pF
-
-
-
1
-
pF
IL=600mA
IF
1.0
-
-
mA
-
IF
0.3
0.9
-
mA
Input Voltage Drop
IF=5mA
VF
0.9
1.2
1.4
V
Reverse Input Current
VR=5V
IR
-
-
10
µA
1
2
3
2
Load current derates linearly from 600mA @ 25oC to 480mA @80oC.
Measurement taken within 1 second of on time.
For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended.
www.clare.com
R03
CPC1018N
PERFORMANCE DATA*
35
30
25
20
15
10
20
15
10
5
0
0
1.17
1.19
1.21
1.23
1.25
0.56
0.58
0.62
10
5
0.25
0.30
0.35
10
63.5
0.66
0.64
64.0
CPC1018N
Typical IF for Switch Dropout
(Ambient Temperature = 25°C)
(Load Current = 100mA)
15
10
0.40
5
0.10
0.15
0.20
0.25
0.30
25
0.35
5
0.41
0.40
0.43
0.45
10
5
0.65
0.60
0.55
IF =10mA
0.50
0.45
0.35
IF =5mA
0.20
0.21
0.22
0.23
0.24
0.25
-40
-20
0
20
CPC1018N
Typical Blocking Voltage
vs. Temperature
68
Turn-On (ms)
Blocking Voltage (V)
70
66
64
62
60
58
-40
-20
0
20
40
60
Temperature (°C)
80
100
0.53
60
80
100
0.012
0.010
0.008
0.006
0.004
0.002
0
120
-40
-20
0
Temperature (°C)
Turn-Off (ms)
72
40
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
CPC1018N
Typical Turn-On vs. Temperature
(Load Current = 80mA)
IF = 5mA
IF = 10mA
-40
-20
0
20
40
60
Temperature (°C)
20
40
60
80
100
Temperature (°C)
80
100
Turn-Off (ms)
0.19
0.51
0.014
0.70
0.40
0
0.49
CPC1018N
Typical Leakage vs. Temperature
(Measured across Pins 3 & 4)
VL = max rated
0.016
Leakage (µA)
Load Current (Arms)
Device Count (N)
15
0.47
Turn-On (ms)
0.75
20
66.5
10
CPC1018N
Typical Maximum Load
Current vs. Temperature
0.80
66.0
15
LED Current (mA)
CPC1018N
Typical Turn-Off Time
(Ambient Temperature = 25°C)
(Load Current = 100mA; IF = 5mA)
65.5
20
0
0
65.0
CPC1018N
Typical Turn-On Time
(Ambient Temperature = 25°C)
(Load Current = 100mA; IF = 5mA)
25
20
LED Current (mA)
64.5
Blocking Voltage (V)
Device Count (N)
Device Count (N)
15
0.20
15
On-Resistance (Ω)
25
Device Count (N)
0.60
20
0.15
20
0
0.54
CPC1018N
Typical IF for Switch Operation
(Ambient Temperature = 25°C)
(Load Current = 600mA)
0.10
25
5
LED Forward Voltage Drop (V)
0
CPC1018N
Typical Blocking Voltage Distribution
(Ambient Temperature = 25°C)
30
25
5
25
35
30
Device Count (N)
Device Count (N)
CPC1018N
Typical On-Resistance Distribution
(Ambient Temperature = 25°C)
(Load Current = 100mA)
Device Count (N)
35
CPC1018N
Typical LED Forward Voltage Drop
(Ambient Temperature = 25°C)
IF = 5mADC
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
CPC1018N
Typical Turn-Off vs. Temperature
(Load Current = 80mA)
IF = 5mA
IF = 10mA
-40
-20
0
20
40
60
80
100
Temperature (°C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our
application department.
R03
www.clare.com
3
CPC1018N
CPC1018N
Typical LED Forward Voltage Drop
vs. Temperature
1.6
1.4
IF = 50mA
1.2
IF = 10mA
IF = 5mA
1.0
0.8
-40
-20
0
20
40
60
80
100
120
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0.7
0.6
5
10
25
30
35
40
45
50
0.4
-40
-20
0
20
40
60
80
100
Load Current (A)
0
-400
-0.1
0
0.1
Load Voltage (V)
0.2
0.3
10
15
20
25
30
35
40
45
50
0.3
0.2
0.1
-20
0
20
60
40
80
100
0.4
0.3
0.2
0.1
0
-40
-20
0
20
40
60
80
100
Temperature (°C)
CPC1018N
Energy Rating Curve
400
-200
5
CPC1018N
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 80mA)
0.6
Temperature (°C)
200
0
LED Forward Current (mA)
0.4
-40
600
-0.2
0.2
0.5
0
CPC1018N
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mA
-600
-0.3
0.3
0
LED Current (mA)
Steady State
LED Current (mA)
On-Resistance (Ω)
IF = 10mA
Temperature (°C)
Load Current (mA)
20
0.5
0.5
0.3
15
CPC1018N
Typical IF for Switch Operation
vs. Temperature
(Load Current = 600mA)
0.6
IF = 5mA
0.8
0.6
0.4
LED Forward Current (mA)
CPC1018N
Typical On-Resistance vs. Temperature
(Load Current = max rated @ Temperature)
0.7
0.5
0.1
0
Temperature (°C)
0.9
CPC1018N
Typical Turn-Off vs. LED Forward Current
(Load Current = 80mA)
Turn-Off (ms)
1.8
CPC1018N
Typical Turn-On vs. LED Forward Current
(Load Current = 80mA)
Turn-On (ms)
LED Forward Voltage Drop (V)
PERFORMANCE DATA*
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
10µs 100µs 1ms 10ms 100ms
1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our
application department.
4
www.clare.com
R03
Manufacturing Information
Soldering
Recommended soldering processes are limited to
260ºC component body temperature for 10 seconds.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
e3
RoHS
2002/95/EC
MECHANICAL DIMENSIONS
4-Pin SOP ("N" Suffix)
6.096 ± 0.102
(0.240 ± 0.004)
0.38 x 45°
(0.015 x 45°)
1.020 ± 0.025
(0.040 ± 0.001)
0.200 ± 0.025
(0.008 ± 0.001)
2.54 ± 0.127
(0.100 ± 0.005)
3.81 ± 0.08
(0.150 ± 0.003)
5.66 ± 0.14
(0.223 ± 0.005)
1.448
(0.057)
4.09 ± 0.20
(0.161 ± 0.008)
2.18 MAX.
(0.086)
0.432 ± 0.127
(0.017 ± 0.005)
PC Board Pattern
(Top View)
0.38 TYP.
(0.015 TYP.)
0.889
(0.035)
2.54 TYP.
(0.100 TYP.)
Tape and Reel Packaging for 4-pin SOP package
A0 = 6.50
(0.256)
330.2 DiA
(13.00" DiA)
P = 8.00
(0.315)
A
Top Cover
Tape Thickness
0.102 MAX
(0.004 MAX)
B0 = 4.70
(0.185)
K1 = 2.30
(0.091)
W = 12.00 MAX
(0.472 MAX)
K0 = 2.7
(0.106)
A
SECTION A-A
NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2
Embossed
Carrier
Embossment
Dimensions:
mm
(inches)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product
descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no
liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement
of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended
to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to
discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1018N-R03
©Copyright 2005, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
9/8/05
5