TS118 Multifunction Telecom Switch Load Voltage Load Current Max RON TS118 350 120 35 Description TS118 is a 350V, 120mA, 35Ω 1-Form-B relay with an optocoupler in a single package. It provides a solution in telecom applications where a normally closed relay is preferred. Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # TS118 TS118P TS118PTR TS118S TS118STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack Tape & Reel (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount Tape & Reel (50/Tube) Pin Configuration TS118 Pinout + LED - Relay – LED - Relay Collector - Phototransistor Emitter - Phototransistor DS-TS118-R4 www.clare.com 1 8 2 7 3 6 4 5 Load - Relay (MOSFET Output) Load - Relay (MOSFET Output) LED - Phototransistor –/+ LED - Phototransistor +/– 1 TS118 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 °C +125 °C - - +260 °C - - +220 °C Electrical Characteristics Parameter Relay Portion (Pins 7, 8) Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Relay Portion (Pins 1, 2) Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current 2 Conditions Symbol Min Typ Max Units 10ms IL=120mA VL=350V VL IL ILPK RON ILEAK - 25 - 350 120 350 35 1 V mA mA Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT - 25 3.0 3.0 - ms ms pF IL=120mA IF=5mA VR=5V IF IF VF VR IR 5 0.4 0.9 - 0.7 1.2 - 50 1.4 5 10 mA mA V V µA www.clare.com Rev. 4 TS118 Electrical Characteristics (Continued) Parameter Detector Portion (Pins 3, 4) Output Characteristics @ 25°C Phototransistor Blocking Voltage Phototransistor Output Current Saturation Voltage Current Transfer Ratio Detector Portion (Pins 5, 6) Input Characteristics @ 25°C Input Control Current Input Voltage Drop Input Current (Detector must be off) Input to Output Capacitance (Relay Only) Capacitance Input to Output Input to Output Isolation Rev. 4 Conditions Symbol Min Typ Max Units IC=10µA VCE=5V, IF=0mA IC=2mA, IF=16mA IF=6mA, VCE=0.5V BVCEO ICEO VSAT CTR 20 33 50 50 0.3 100 500 0.5 - V nA V % IC=2mA, VCE=0.5V IF=5mA IC=1µA, VCE=5V - IF VF IF 6 0.9 5 2 1.2 25 100 1.4 - mA V µA CI/O - 3 - pF - VI/O 3750 3 - - pF VRMS www.clare.com 3 TS118 PERFORMANCE DATA* TS118 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 5mADC) 35 30 30 25 20 15 10 Device Count (N) 35 30 25 20 15 10 1.17 1.19 1.21 1.23 25.5 1.25 26.5 27.5 TS118 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) 28.5 29.5 30.5 10 357.5 372.5 387.5 402.5 417.5 432.5 447.5 31.5 Blocking Voltage (V) TS118 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 5mADC) TS118 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) 25 25 20 20 20 15 10 5 0 Device Count (N) 25 Device Count (N) 15 10 5 0.33 0.55 0.77 0.99 1.21 1.43 1.65 0.11 0.33 0.55 LED Current (mA) Load Current (mA) 20 15 10 5 0.77 0.99 1.21 0.09 1.43 0.99 180 0.045 160 0.040 140 0.035 120 100 5mA 80 60 1.17 -20 0 20 0.5 Turn-On (ms) 400 395 390 385 40 60 80 100 375 0 20 40 60 Temperature (°C) 80 100 0.020 -40 0 20 40 60 80 100 TS118 Typical Turn-On vs. Temperature (Load Current = 120mADC) TS118 Typical Turn-Off vs. Temperature (Load Current = 120mADC) 0.4 0.3 0.2 5mA -40 -20 Temperature (°C) 0 -20 0.025 Temperature (°C) 0.1 380 1.17 0.030 120 Turn-Off (ms) 0.6 405 0.99 0.005 TS118 Typical Blocking Voltage vs. Temperature 410 0.81 0.010 -40 1.35 0.63 0.015 40 Turn-Off (ms) -40 0.45 TS118 Typical Leakage vs. Temperature (Measured across Pins 7 & 8) 0 0 0.81 0.27 Turn-On (ms) 20 0.63 5 TS118 Typical Load Current vs. Temperature 25 0.45 10 LED Current (mA) TS118 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 5mADC) 0.27 15 0 0 Leakage (µA) Device Count (N) 15 ON Resistance (Ω) LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 20 0 0 0 25 5 5 5 Device Count (N) TS118 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 Device Count (N) Device Count (N) TS118 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) -20 0 20 40 60 Temperature (°C) 80 100 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0 5mA 10mA 20mA -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 4 TS118 PERFORMANCE DATA* 0.30 0.7 1.6 0.25 0.6 50mA 30mA 20mA 10mA 5mA 1.2 1.0 Turn-Off (ms) 1.8 1.4 0.20 0.15 0.10 0.3 0.2 0.1 -20 0 20 40 60 80 100 0 0 120 5 10 15 20 25 30 35 40 45 0 50 TS118 Typical On-Resistance vs. Temperature (Load Current = 120mADC; IF = 5mADC) 2.500 30 20 2.000 1.500 1.000 10 0.500 0 0 20 40 60 80 100 0 -50 -100 -150 -4 -3 -2 -1 0 1 2 3 4 40 45 50 1.000 -20 0 20 40 60 80 -40 100 -20 0 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10µs 100µs 1ms 10ms 100ms 20 40 60 80 100 Temperature (°C) TS118 Typical Normalized CTR vs. Forward Current (VCE = 0.5V) TS118 Energy Rating Curve Load Current (A) 50 35 1.500 Temperature (°C) 100 30 0 -40 150 25 0.500 Temperature (°C) TS118 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mA) 20 2.000 4.5 4.0 Normalized CTR (%) 0 LED Current (mA) 3.000 2.500 LED Current (mA) 3.000 40 15 TS118 Typical IF for Switch Dropout vs. Temperature (Load Current = 120mADC) TS118 Typical IF for Switch Operation vs. Temperature (Load Current = 120mADC) 50 -20 10 LED Forward Current 60 -40 5 LED Forward Current (mA) Temperature (°C) On-Resistance (Ω) 0.4 0 -40 Load Current (mA) 0.5 0.05 0.8 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10s 100s 1s Load Voltage (V) Time TS118 Typical Normalized CTR vs. Temperature (VCE = 0.5V) TS118 Typical Collector Current vs. Forward Current (VCE = 0.5V) 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) 12 8 7 10 6 8 5 IC (mA) Normalized CTR (%) TS118 Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) TS118 Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) Turn-On (ms) LED Forward Voltage Drop (V) TS118 Typical LED Forward Voltage Drop vs. Temperature 4 3 2 1 0 -40 -20 0 20 40 60 Temperature (°C) 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4 www.clare.com 5 TS118 Mechanical Dimensions 9.652 ± .381 (.380 ± .015) 8 Pin DIP Through Hole (Standard) 2.540 ± .127 8-.800 DIA. (.100 ± .005) (8-.031 DIA.) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 ± .508 (.360 ± .020) 6.350 ± .127 (.250 ± .005) 9.144 TYP. (.360) .457 ± .076 (.018 ± .003) 7.620 ± .127 (.300 ± .005) 8.077 ± .127 (.318 ± .005 ) 9.652 ± .381 (.380 ± .015) 8 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .254 TYP. (.010) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .457 ± .076 (.018 ± .003) 1.498 ± .127 (.059 ± .005) 8.077 ± .127 (.318 ± .005) 9.652 ± .381 (.380 ± .015) 2.540 ± .127 (.100 ± .005) 8 Pin Flatpack (“P” Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 2.286 MAX. .635 ± .127 (.090) (.025) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) 6.350 ± .127 (.250 ± .005) 9.398 ± .127 (.370 ± .005) 8.763 ± .127 (.345 ± .005) .203 (.008) 1.193 (.047) .457 ± .076 (.018 ± .003) 8.077 ± .127 (.318 ± .005) .787 (.031) Dimensions mm (inches) 6 www.clare.com Rev. 4 TS118 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.300 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .30 (.630 ± .012 .050R TYP. 11.989 ± .102 (.472 ± .004) 10.300 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 4 www.clare.com 7 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-TS118-R4 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/20/01