date 09/28/2011 page 1 of 5 SERIES: V78W-500 │ DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR FEATURES • • • • • • • • • up to 500 mA current output extremly high efficiency up to 95% no heatsink required pin comparable to LM78 linear regulators available in straight and right angle SIP packages up to 8:1 ultra wide input low ripple and noise short circuit protections wide temperature (-40°C ~ 85°C) RoHS input voltage output voltage range (Vdc) (Vdc) min (mA) V7803W-500 9 ~ 72 3.3 V7805W-500 9 ~ 72 V7806W-500 9 ~ 72 V7809W-500 14 ~ 72 V7812W-500 17 ~ 72 V7815W-500 20 ~ 72 V7824W-500 36 ~ 72 MODEL 2 Notes: output current output power ripple and noise1 efficiency level max (mA) max (W) max (mVp-p) Vin min (%) 10 500 1.65 60 82 5 10 500 2.5 60 87 6.5 10 500 3.25 60 91 9 10 500 4.5 60 92 12 10 500 6 60 93 15 10 500 7.5 60 94 24 6 300 7.2 60 95 1. 20MHz bandwidth, from 10% to 100% load 2. V7824W-500 output current is 300 mA (max) PART NUMBER KEY V78 XX W - XXX X Base Number Output Voltage Output Current cui.com blank = standard R = Right Angle CUI Inc │ SERIES: V78W-500 │ DESCRIPTION: DC-DC CONVERTER date 09/28/2011 │ page 2 of 5 INPUT parameter operating input voltage conditions/description 3, 5, 6.5 V models 9 V model 12 V model 15 V model 24 V model min typ max units 9 14 17 20 36 48 48 48 48 48 72 72 72 72 72 Vdc Vdc Vdc Vdc Vdc min typ max units OUTPUT parameter conditions/description line regulation measured from low line to high line ±0.4 ±1.0 % load regulation measured from 10% to full load ±0.3 ±0.6 % voltage accuracy at 100% load switching frequency 100% load temperature coefficient -40°C ~ +85°C ambient quiescent current Vin = nominal, min. load tendencies load at 10% to 100% load ±2 120 ±3 % 800 kHz ±0.015 %/°C 1 5 mA 1.0 ±100 1.5 mV ms 100 μF typ max units 0.72 1.2 W 700 1200 mA typ max units 60 °C/W max capacitance load PROTECTIONS parameter conditions/description min short circuit protection continuous, automatic recovery short circuit input power Vin = nominal thermal shutdown current limit 160 Vin = nominal °C SAFETY AND COMPLIANCE parameter conditions/description min thermal resistance safety approvals EN-60950-1 EMI/EMC EN55022, class B (refer to page 4), IEC/EN 61000-4-2 level 4 RoHS compliant yes MTBF 25°C (MIL-HDBK-217K) 71°C (MIL-HDBK-217K) 3,500,000 1,500,000 hours hours ENVIRONMENTAL parameter conditions/description min power derating above 71°C -40 -55 case operating temperature operating temperature storage temperature storage humidity Note: typ max units 65 100 °C 85 °C 125 °C 95 % non-condensing 1. All specifications measured at TA=25°C, humidity <75%, nominal input voltage and rated output load unless otherwise specified. cui.com CUI Inc │ SERIES: V78W-500 │ DESCRIPTION: DC-DC CONVERTER date 09/28/2011 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 11.5 x 9.0 x 17.5 mm (0.45 x 0.35 x 0.69 inch) min case material Plastic (UL94-V0) typ weight max units 4 g MECHANICAL DRAWING Units: mm [in] All pins on a 2.54mm pitch pin tolerance: ±0.10mm[±0.004in] general tolerance: ±0.25mm[±0.010in] general tolerance (right angle): ±0.50mm[±0.020in] V78W-500 11.50 0.453 V78W-500R 9.00 0.354 11.50 0.453 9.00 0.354 17.50 0.689 17.50 0.689 0.50 0.020 0.50 0.020 4.10 0.161 1.50 0.059 5.08 0.200 2.15 0.085 5.08 0.200 2.15 0.085 1 2 0.50 0.020 3 1 2 3 4.10 0.161 0.55 0.022 RECOMMENDED FOOTPRINT V78W-500 V78W-500R 1.10 0.043 (3 PLCS) 5.08 0.200 1.10 0.043 (3 PLCS) 5.08 0.200 3 2.15 0.085 1 2 3 2 1 2.54 0.100 2.54 0.100 1.35 0.053 2.54 0.100 PIN CONNECTIONS 2.54 0.100 cui.com 1 +Vin 2 GND 3 +Vout CUI Inc │ SERIES: V78W-500 │ DESCRIPTION: DC-DC CONVERTER date 09/28/2011 │ page 4 of 5 TYPICAL APPLICATION CIRCUIT APPLICATION EXAMPLE High voltage input, multiple outputs, with greater load 1 +Vin V78W-500(R) 3 +Vout Reverse protection 1 +Vin V7812W-500(R) 3 +12V/100mA 2 C1 2 C1 GND V7805W-500(R) +5V/850mA C2 F GND GND 1. The regulator proposed to establish the input voltage by soft-start, no plug and play, if the input voltage changes from low voltage to high voltage abruptly, the regulator might be damaged. 1. The input current amount of the back-grade regulator and the pre-class load should be less than or equal the max load current of the pre-class regulator. 2. If the applications is high-voltage input, the regulator must add an external capacitor C1(≤47μF/100V) to prevent voltage spikes caused by damage to the module. 2. If further filtering is required, please add components as per the above circuit (We recommend not to add components), if request, please make sure the capacitors C1 ≤47μF, C2≤10μF more close to the back-grade regulator. 3. No parallel connection. MODULES PROTECT RECOMMENDED CIRCUIT GND DERATING CURVE Temperature Derating Graph 1 +Vin V78W-500(R) 3 +Vout 2 GND GND 1 +Vin V78W-500(R) 2 3 Schottky Diode Vout= +Vout0.3V Operating Temp.( C ) GND GND EMC RECOMMENDED CIRCUIT 0.5mH-2mH +Vin 1 +Vo ut Vin 3 GND 2 270 F-470 F 1.0 F-3.3 F 0.68 F-2.2 F ND 0.5mH-2mH cui.com RL CUI Inc │ SERIES: V78W-500 │ DESCRIPTION: DC-DC CONVERTER date 09/28/2011 │ page 5 of 5 REVISION HISTORY rev. 1.0 description date initial release 09/28/2011 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.