March 6, 2007 SMD INDUCTOR DR77194 • • • • • Height: 6.98mm Max Footprint: 10.80mm x 13.20mm Max Current Rating: 27A Operating Temperature -20°C to +85°C Tinned Leads with Leaded Solder is Available (note 2) ELECTRICAL SPECIFICATIONS AT 25°C .56µH ±10% INDUCTANCE (1-2) @ 10kHz, 0.1 Vrms INDUCTANCE WITH 27 ADC BIAS (1-2) @ 10kHz, 0.1 Vrms DCR (1-2) HIPOT WINDING TO CORE .42µH MIN. 0.002Ω MAX 300 VDC OUTLINE SPECIFICATIONS .130 3,30 .445 MAX. 11,30 .440 11,17 1 1 2 .370 9,40 .530 MAX. 13,46 SUGGESTED PAD LAYOUT 2 SCHEMATIC .275 MAX. 6,98 1 .330 REF. 8,38 2 .095 2,41 Notes: 1. Tolerance: Unless otherwise specified, inches/mm = ± 0.010/0,25 2. For non-RoHS parts replace DR prefix with 42- (e.g. DR77194 becomes 42-77194 3. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel 951-928-7700, Toll free 888-889-5391, FAX 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.