SK52 ... SK510 SK52 ... SK510 Surface Mount Schottky Rectifier Diodes Schottky-Gleichrichterdioden für die Oberflächenmontage Version 2010-12-06 Nominal current – Nennstrom 5A ± 0.5 5.4 2.2 ± 0.2 2.1± 0.1 Repetitive peak reverse voltage Periodische Spitzensperrspannung Plastic case Kunststoffgehäuse 0.15 3.7 Type Typ 5 ~ SMB ~ DO-214AA Weight approx. – Gewicht ca. 2 ± 0.1 1.1 20...100 V 0.1 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert ± 0.5 Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Maße [mm] Maximum ratings Type Typ Grenzwerte Repetitive peak reverse voltage Periodische Spitzensperrspannung VRRM [V] Surge peak reverse voltage Stoßspitzensperrspannung VRSM [V] Forward voltage Durchlass-Spannung VF [V] 1) SK52 20 20 < 0.55 SK53 30 30 < 0.55 SK54 40 40 < 0.55 SK55 50 50 < 0.68 SK56 60 60 < 0.68 SK58 80 80 < 0.83 SK510 100 100 < 0.83 Max. average forward rectified current, R-load Dauergrenzstrom in Einwegschaltung mit R-Last SK52...SK56 SK58, SK510 IFAV IFAV 5 A 1) 5 A 2) Repetitive peak forward current Periodischer Spitzenstrom f > 15 Hz IFRM 20 A 2) Peak forward surge current, 50/60 Hz half sine-wave Stoßstrom für eine 50/60 Hz Sinus-Halbwelle TA = 25°C IFSM 100/110 A Rating for fusing, t < 10 ms Grenzlastintegral, t < 10 ms TA = 25°C i2t Operating junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj 1 1 2 TS 50 A2s -50...+150°C -50...+150°C IF = 5 A, Tj = 25°C Max. temperature of the terminals TT = 100°C – Max. Temperatur der Anschlüsse TT = 100°C Max. temperature of the terminals TT = 85°C – Max. Temperatur der Anschlüsse TT = 85°C © Diotec Semiconductor AG http://www.diotec.com/ 1 SK52 ... SK510 Characteristics Kennwerte Leakage current Sperrstrom Tj = 25°C Tj = 100°C VR = VRRM VR = VRRM IR IR < 150 µA < 20 mA Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft RthA < 45 K/W 1) Thermal resistance junction to terminal Wärmewiderstand Sperrschicht − Anschluss RthT < 15 K/W 102 120 [%] [A] 100 SK52...54 10 80 SK55, SK56 1 60 40 SK58, SK5510 10-1 20 IF IFAV 0 10 Tj = 25°C -2 0 TT 50 100 150 [°C] 0 Rated forward current vs. temp. of the terminals Zul. Richtstrom in Abh. v. d. Temp. der Terminals 1 2 VF 0.4 0.6 [V] 1.0 Forward characteristics (typical values) Durchlasskennlinien (typische Werte) Mounted on P.C. board with 50 mm2 copper pads at each terminal Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lötpad) an jedem Anschluss http://www.diotec.com/ © Diotec Semiconductor AG