LED - Lamp ELD-700-324 15.11.2007 rev. 05 Radiation Type Technology Case Infrared DDH AlGaAs/AlGaAs 3 mm plastic lens Description High-power, high-speed infrared LED, compact design in standard 3 mm casing, housing without standoff leads ±0,1 Ø3,0 ±0,1 min 25,4 1,0 5,2 ±0,1 0,5 2,54 Ø4,0 1,5 Applications ±0,5 Optical communications, safety equipment, automation ±0,1 Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 50 mA IFM 500 mA PD 150 mW Operating temperature range Tamb -25 to +85 °C Storage temperature range Tstg -30 to +100 °C Tsol 260 °C Typ Max Unit 1.9 2.1 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation < 5s, 3.0 mm from case Lead soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 50 mA Forward voltage1 Reverse voltage Symbol Min VF IR = 10 µA VR 6 V IF = 50 mA Φe 7 10 mW 1 IF = 50 mA Ιe 23 32 mW/sr Peak wavelength IF = 50 mA λp 690 700 Spectral bandwidth at 50% IF = 50 mA ∆λ0.5 33 nm Viewing angle IF = 50 mA ϕ 15 deg. Switching time IF = 50 mA tr, tf 20/25 ns Radiant power 1 Radiant intensity 710 nm 1 for information only Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545