LED - Lamp ELD-940-535 15.11.2007 rev. 02 Radiation Type Technology Case Infrared DH AlGaAs/GaAs 5 mm plastic lens Description High-power, high-speed infrared LED in the widely used 940 nm range. Mounted in standard 5 mm housing without standoff leads 8,6 5,75 - 0,3 1 2,54 0,8 - 0,4 Anode Note: Special packages with standoff available on request Applications 1,5 0,6 - 0,2 36,5 ± 1,0 Ø5 Optical communications, safety equipment, automation, optical sensors, medical appliances Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Symbol Value Unit IF 150 mA IFM 250 mA PD 250 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -40 to +100 °C Junction temperature TJ 100 °C TSd 260 °C Typ Max Unit VF 1.2 1.4 V 1,3 Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min Forward voltage* IF = 100 mA VF Reverse voltage IR = 100 µA VF 5 Radiant power IF = 20 mA Φe 4,5 Radiant power* IF = 100 mA Φe Radiant intensity IF = 20 mA Ιe Radiant intensity* IF = 100 mA Peak wavelength V V 6.5 mW 32 mW 10 14 mW/sr Ιe 50 70 mW/sr IF = 100 mA λp 930 940 Spectral bandwidth at 50% IF = 100 mA ∆λ0.5 Viewing angle IF = 100 mA Switching time IF = 100 mA 950 nm 45 nm ϕ 30 deg. tr, tf 500 ns *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 1 of 3 LED - Lamp ELD-940-535 15.11.2007 rev. 02 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 2 of 3 LED - Lamp ELD-940-535 15.11.2007 rev. 02 Remarks concerning optical radiation safety* Up to a forward current of 85 mA, at continuous operation, this LED may be classified as LED product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin under reasonably predictable conditions. This implicates a direct observation of the light beam by means of optical instruments. If intended to operate at higher continuous current, this product would be classified as LED product Class 1M , according to standard IEC 60825-1:A2. Class 1M products are safe to eyes and skin under normal conditions, including when users view the light beam directly. Class 1M products produce either a highly divergent beam or a large diameter beam, so only a small part of the whole light beam can enter the eye. However, these LED products can be harmful to the retina if the beam is viewed using magnifying optical instruments. Therefore, users should not incorporate optics that could concentrate the output into the eyes. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 3 of 3