TACT SWITCHES SERIES KC SWITCHES ROTARY SWITCHES NAVIGATION SWITCHES SPECIFICATIONS PUSHBUTTON SWITCHES TOGGLE SWITCHES ROCKER SWITCHES Life Expectancy: 10,000 cycles typical Contact Resistance: 25mΩ initial @ 2-4 VDC, 100mA Dielectric Strength: 1,500 max V rms at sea level Insulation Resistance: 100MΩ min. Operating Force: 8.6 N/cm MATERIALS 1 to 4 poles 1 to 12 positions No stop option ▲ ▲ ▲ SLIDE SWITCHES 350 mA @ 125 VAC 150 mA @ 250 VAC FEATURES & BENEFITS APPLICATIONS/MARKETS Industrial controls Test & instrumentation Appliance HVAC Housing, Base, Shaft: Glass filled nylon Contact: Silver plated copper alloy Hardware: Nut-Zinc, nickel plated Lockwasher–Steel, zinc plated Stop ring–Brass, nickel plated Gold flash over silver plate HOW TO ORDER MODEL NO. SERIES SNAP-ACTION SWITCHES Ratings: ACTUATOR ACUTATOR LENGTH BUSHING TIMING TERMINATION CONTACT MATERIAL 01 N=Non-Short P=PC Pin S 02* S=Shorting L=Solder Lug F KC See Model Options Table A=Flat B=Round See Actuator Option Chart DIP SWITCHES D=Slotted KEYLOCK SWITCHES KC_ 13_ B_ 7.0_ 02_ N_ L_ S * Not available with #10 model. Specifications subject to change without notice. KC GENERAL INFORMATION CAP OPTIONS DETECTOR SWITCHES ROTARY SWITCHES ▲ ▲ ▲ Example Ordering Number 232 Phone: 800-867-2717 Fax: 763-531-8235 TACT SWITCHES MODEL NUMBER OPTIONS Terms A,C,1-12 A, C,2,8 A,C,1,2,7,8 A,C 1-3, 7-9 A,C,1-4,7-10 A,C,1-5, 7-11 A,C,1-12 A,C,1,3,7,9 A,C,1,4,7,10 A,C,1,3,5,7,9,11 * Note: Switches with P terminations (PC pins) have additional terminal no. 9 as switch support only. This terminal is not connected electrically inside switch. Model 30 31 32 33 34 80 81 (3P Models) Sw. Func. 4-pos.-No stops ST DT 3 pos. 4 pos. 2 pos. 60° index 2 pos.-90° index Terms A,B,C,1-12 A,B,C,2,6,10 A,B,C,1,2,5,6,9,10 A,B,C,1-3,5-7,9-11 A,B,C,1-12 A,B,C,1,3,5,7,9,11 A,B,C,1,4,5,8,9,12 Model 40 41 42 43 91 (4P Models) Sw. Func. 3-pos.-No stops ST DT 3 pos. 2 pos. 60° index Terms all terms A,B,C,D,2,5,8,11 A,B,C,D,1,2,4,5,7,8,10,11 all terms A,B,C,D,1,3,4,6,7,9,10,12 NAVIGATION SWITCHES (DP Models) Sw. Func. 6-pos.-No stops ST DT 3 pos. 4 pos. 5 pos. 6 pos. 2 pos. 60° index 2 pos. 90° index 2 pos. 60° index ** Note: Standard with stops All models 30° indexing unless otherwise noted. D SLOTTED Actuator Available Actuator Lengths (mm) 30.0 30.0 0.0 38.0 10.0 9.5 7.0 7.0 10.0 ROTARY SWITCHES *All actuators shown in Pos. 1, fully CCW.. BUSHING OPTIONS 02 METRIC PANEL MOUNTING www.e-switch.com info @ e-switch.com PANEL MOUNTING CAP OPTIONS DETECTOR SWITCHES 01 STANDARD 13.0 KEYLOCK SWITCHES A B D DIP SWITCHES B ROUND SLIDE SWITCHES ACTUATOR OPTIONS A FLAT PUSHBUTTON SWITCHES Model 20 21 22 23 24 25 26 70 71 72 TOGGLE SWITCHES Terms A, 1-12 A, 2* A, 1,2* A, 1-3* A, 1-4* A, 1-5* A, 1-6* A, 1-7 A, 1-8 A, 1-9 A, 1-10 A, 1-11 A, 1-12 A, 1,3* A, 1,4* A, 1,3,5* A, 1,4,7 A,1,3,5,7 A,1,4,7,10** A,1,3,5,7,9 A,1,3,5,7,9,11 ROCKER SWITCHES (SP Models) Sw. Func. 12-pos.-No stops ST DT 3 pos. 4 pos. 5 pos. 6 pos. 7 pos. 8 pos. 9 pos. 10 pos. 11 pos. 12 pos. 2 pos. -60° index 2 pos. -90° index 3 pos. -60° index 3 pos. -90° index 4 pos. -60° index 4 pos. -90° index 5 pos. -60° index 6 pos. -60° index SNAP-ACTION SWITCHES Model 10 11 12 13 14 15 16 17 18 19 50 51 52 53 54 55 56 57 58 59 60 233 ROTARY SWITCHES SCHEMATICS AND PC MOUNTING SP 1 POLE, 12 POSITIONS 3P 3 POLE, 4 POSITIONS PUSHBUTTON SWITCHES NAVIGATION SWITCHES TACT SWITCHES SERIES KC SWITCHES TOGGLE SWITCHES SCHEMATIC 4P 4 POLE, 3 POSITIONS DIP SWITCHES SNAP-ACTION SWITCHES SLIDE SWITCHES ROCKER SWITCHES DP 2 POLE, 6 POSITION SCHEMATIC SCHEMATIC SCHEMATIC TIMING OPTIONS N= (STD.) Non-shorting – break before make S = Shorting – make before break Note: (S) shorting contacts available only with 30° indexing P PC PIN L SOLDER LUG DETECTOR SWITCHES ROTARY SWITCHES KEYLOCK SWITCHES TERMINATION OPTIONS CAP OPTIONS CONTACT MATERIAL OPTIONS 234 S = Standard Silver over copper alloy F = Gold Flash over silver plate over copper alloy Phone: 800-867-2717 Fax: 763-531-8235