Technical Data Sheet Full Color Chip LED 15-13D/R6GHBHC-A01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․ESD Protect. ․The product itself will remain within RoHS compliant version. Descriptions ․The 15-13D SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Resin Color Water Clear Rev. 2 Page: 1 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Package Outline Dimensions 3.2 B 2.6 R Anode Mark G 1.1 0.9 0.5 2.3 0.9 0.6 2.0 0.7 1.8 1.8 0.7 4.6 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 2 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF mA GH:25 BH:25 Peak Forward Current (Duty 1/10 @1KHz) R6:60 IFP mA GH:100 BH:100 R6:60 Power Dissipation Pd mW GH:110 BH:110 R6:2000 Electrostatic Discharge(HBM) ESD V GH:2000 BH:2000 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Everlight Electronics Co., Ltd. Device No. : DSE-00005368 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 3 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Iv Min. Typ. R6 90 140 GH 112 180 BH 45 70 ----- 120 2θ1/2 Viewing Angle Dominant Wavelength Spectrum Radiation Bandwidth λp λd GH ----- 468 R6 624 ----- 470 R6 20 △λ GH VF 525 BH ----- BH Forward Voltage 518 BH GH 35 IR Condition ----- mcd IF=20mA ----- deg IF=20mA ----- nm IF=20mA ----- nm IF=20mA ----- nm IF=20mA V IF=20mA μA VR=5V 25 R6 1.7 2.0 2.4 GH 2.7 3.3 3.7 BH 2.7 3.3 3.7 10 R6 Reverse Current Unit 632 R6 Peak Wavelength Max. GH ----- ----- 50 50 BH Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 4 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves R6 Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 5 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves GH Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 6 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves BH Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 7 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 8 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Desiccant Rev. 2 Label Page: 9 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Everlight Electronics Co., Ltd. Device No. : DSE-00005368 Test Condition Temp. : 260℃±5℃ Max. 10sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. IF = 20 mA 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 10 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax . 10 sec. M ax. A bo ve25 5°C 3 0sec.M ax . 3°C /sec.M ax . 6°C /sec.M ax . P re-h eatin g A b o v e 2 1 7 °C 6 0~ 1 5 0sec. 1 50 ~ 20 0 °C 6 0 ~ 1 2 0 sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-00005368 http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 11 of 12 Prepared by : Esther Yan 15-13D/R6GHBHC-A01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-00005368 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 05-Jul-2011 Rev. 2 Page: 12 of 12 Prepared by : Esther Yan