Technical Data Sheet Chip LED with Bi-Color (Multi-Color) 19-226/R6G7C-B02/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-226 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Revision Emitted Color Type Material R6 AlGaInP Brilliant Red G7 AlGaInP Brilliant Yellow Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Resin Color Water Clear Rev. 2 Page: 1 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Package Outline Dimensions 1.6 3 1 4 1.3 2 Cathode mark 1.1 0.4 1.0 2 2 3 1 3 1.15 4 0.15 1 0.15 1.15 0.8 4 0.8 2.4 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 2 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP Power Dissipation Pd Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol R6:25 G7:25 R6:60 G7:60 R6:60 G7:60 R6:2000 G7:2000 mA mA mW V Reflow Soldering : 260 ℃ for 10 sec. Revision Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 3 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Iv Luminous Intensity Viewing Angle R6 22.5 G7 7.2 2θ1/2 λp Min. R6 Peak Wavelength --------- G7 Typ. ----120 632 575 Max. 57 18 Unit Condition mcd ----- deg ----- nm IF=10mA Dominant Wavelength Spectrum Radiation Bandwidth λd △λ R6 616 G7 567 R6 ----G7 626 ----20 20 575 nm ----- nm Forward Voltage VF 1.7 2.0 2.4 V Reverse Current IR ----- ----- 10 μA VR=5V Notes: Tolerance of Luminous Intensity ±11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 4 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T R6 Bin Range Of Luminous Intensity Bin Min Max 1 22.5 36.0 2 36.0 57.0 Unit Condition mcd IF=10mA Unit Condition mcd IF=10mA Unit Condition nm IF=10mA G7 Bin Range Of Luminous Intensity Bin Min Max K 7.2 11.5 L 11.5 18.0 Bin Range Of Dom. Wavelength Bin Min Max 1 567.0 570.0 2 569.0 571.5 3 570.5 573.5 4 572.5 575.0 Notes: Tolerance of Luminous Intensity ±11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 5 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Relative luminous intensity (%) Forward Current FI (mA) Ta=25°C Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Forward Current Ta=25°C Luminous Intensity vs. Relative luminous intensity (% ) Relative luminous intensity (% ) Ambient Temperature Ambient Temperature Ta (°C) Radiation Diagram Ta=25°C Forward Current FI (mA) Forward Current Derating Curve Ambient Temperature Ta (°C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 6 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Typical Electro-Optical Characteristics Curves G7 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 7 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Forward Current Relative luminous intensity (%) IF(mA) Ta=25°C Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Forward Current Luminous Intensity vs. Ta=25°C Relative luminous intensity (% ) Relative luminous intensity (% ) Ambient Temperature Ambient Temperature Ta (°C) Forward Current Radiation Diagram Ta=25°C Forward Current IF(mA) Forward Current Derating Curve IF(mA) Ambient Temperature Ta (°C) Label Explanation Pb Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: :2 LifecyclePhase: EVERLIGHT Rev. 2 CPN : P N : XXXXXXXXXXXXX 10-Sep-2009 Prepared Page: 8 of 13 by: Ashley Kuo RoHS Release Date:2009-09-14 11:07:33.0 XXXXXXXXXXXXX QTY : XXX Expired Period: Forever CAT : XXX HUE : XXX 19-226/R6G7C-B02/2T CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 9 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Reliability Test Items And Conditions Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 10 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 11 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 2 60°C M ax. 1 0sec. M ax . A bo ve25 5°C 3 0sec.M ax . 3° C /sec.M ax. P re-heating 6°C /sec.M ax. A bove 217°C 60~ 15 0sec. 1 50~ 200°C 60~ 120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 12 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever 19-226/R6G7C-B02/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002283 Prepared date: 10-Sep-2009 :2 LifecyclePhase: Rev. 2 Page: 13 of 13 Prepared by: Ashley Kuo Release Date:2009-09-14 11:07:33.0 Expired Period: Forever